[PATCH v2 0/2] Remove PCIE root bridge LSI on powernv

[Frederic Barrat]

The powernv8/powernv9/powernv10 machines allocate a LSI for their root
port bridge, which is not the case on real hardware. The default root
port implementation in qemu requests a LSI. Since the powernv
implementation derives from it, that's where the LSI is coming
from. This series fixes it, so that the model matches the hardware.

However, the code in hw/pci to handle AER and hotplug events assume a
LSI is defined. It tends to assert/deassert a LSI if MSI or MSIX is
not enabled. Since we have hardware where that is not true, this patch
also fixes a few code paths to check if a LSI is configured before
trying to trigger it.


Changes from v1:
 - addressed comments from Daniel


Frederic Barrat (2):
  pcie: Don't try triggering a LSI when not defined
  ppc/pnv: Remove LSI on the PCIE host bridge

 hw/pci-host/pnv_phb3.c | 1 +
 hw/pci-host/pnv_phb4.c | 1 +
 hw/pci/pcie.c          | 5 +++--
 hw/pci/pcie_aer.c      | 2 +-
 4 files changed, 6 insertions(+), 3 deletions(-)

-- 
2.35.1