When a BAR is not mapped, the displayed size is shifted by 1 byte:
(qemu) info pci
...
Bus 0, device 11, function 0:
Ethernet controller: PCI device 1022:2000
PCI subsystem 0000:0000
IRQ 10, pin A
BAR0: I/O at 0xffffffffffffffff [0x001e].
BAR1: 32 bit memory at 0xffffffffffffffff [0x0000001e]. <===
BAR6: 32 bit memory at 0xffffffffffffffff [0x0003fffe]. <===
id ""
Bus 0, device 18, function 0:
VGA controller: PCI device 1013:00b8
PCI subsystem 1af4:1100
BAR0: 32 bit prefetchable memory at 0x10000000 [0x11ffffff].
BAR1: 32 bit memory at 0x12050000 [0x12050fff].
BAR6: 32 bit memory at 0xffffffffffffffff [0x0000fffe]. <===
id ""
Only substract this byte when the BAR is mapped to display
the correct size:
(qemu) info pci
...
Bus 0, device 11, function 0:
Ethernet controller: PCI device 1022:2000
PCI subsystem 0000:0000
IRQ 10, pin A
BAR0: I/O at 0xffffffffffffffff [0x001f].
BAR1: 32 bit memory at 0xffffffffffffffff [0x0000001f]. <===
BAR6: 32 bit memory at 0xffffffffffffffff [0x0003ffff]. <===
id ""
Bus 0, device 18, function 0:
VGA controller: PCI device 1013:00b8
PCI subsystem 1af4:1100
BAR0: 32 bit prefetchable memory at 0x10000000 [0x11ffffff].
BAR1: 32 bit memory at 0x12050000 [0x12050fff].
BAR6: 32 bit memory at 0xffffffffffffffff [0x0000ffff]. <===
id ""
Fixes: 0ac32c8375 ("PCI interrupt support - 'info pci' monitor command")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/pci/pci-hmp-cmds.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/hw/pci/pci-hmp-cmds.c b/hw/pci/pci-hmp-cmds.c
index fb7591d6ab..8cfa5f9cd1 100644
--- a/hw/pci/pci-hmp-cmds.c
+++ b/hw/pci/pci-hmp-cmds.c
@@ -75,22 +75,24 @@ static void hmp_info_pci_device(Monitor *mon,
const PciDeviceInfo *dev)
for (region = dev->regions; region; region = region->next) {
uint64_t addr, size;
+ bool mapped;
addr = region->value->address;
size = region->value->size;