qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 18/31] tests/qtest/libqos/e1000e: Remove duplicate register defin


From: Akihiko Odaki
Subject: [PATCH 18/31] tests/qtest/libqos/e1000e: Remove duplicate register definitions
Date: Thu, 12 Jan 2023 18:57:30 +0900

The register definitions in tests/qtest/libqos/e1000e.h had names
different from hw/net/e1000_regs.h, which made it hard to understand
what test codes corresponds to the implementation. Use
hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
these duplications.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
---
 tests/qtest/libqos/e1000e.c | 20 ++++++++++----------
 tests/qtest/libqos/e1000e.h |  5 -----
 2 files changed, 10 insertions(+), 15 deletions(-)

diff --git a/tests/qtest/libqos/e1000e.c b/tests/qtest/libqos/e1000e.c
index b90eb2d5e0..28fb3052aa 100644
--- a/tests/qtest/libqos/e1000e.c
+++ b/tests/qtest/libqos/e1000e.c
@@ -51,13 +51,13 @@ static uint32_t e1000e_macreg_read(QE1000E *d, uint32_t reg)
 void e1000e_tx_ring_push(QE1000E *d, void *descr)
 {
     QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e);
-    uint32_t tail = e1000e_macreg_read(d, E1000E_TDT);
-    uint32_t len = e1000e_macreg_read(d, E1000E_TDLEN) / E1000_RING_DESC_LEN;
+    uint32_t tail = e1000e_macreg_read(d, E1000_TDT);
+    uint32_t len = e1000e_macreg_read(d, E1000_TDLEN) / E1000_RING_DESC_LEN;
 
     qtest_memwrite(d_pci->pci_dev.bus->qts,
                    d->tx_ring + tail * E1000_RING_DESC_LEN,
                    descr, E1000_RING_DESC_LEN);
-    e1000e_macreg_write(d, E1000E_TDT, (tail + 1) % len);
+    e1000e_macreg_write(d, E1000_TDT, (tail + 1) % len);
 
     /* Read WB data for the packet transmitted */
     qtest_memread(d_pci->pci_dev.bus->qts,
@@ -68,13 +68,13 @@ void e1000e_tx_ring_push(QE1000E *d, void *descr)
 void e1000e_rx_ring_push(QE1000E *d, void *descr)
 {
     QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e);
-    uint32_t tail = e1000e_macreg_read(d, E1000E_RDT);
-    uint32_t len = e1000e_macreg_read(d, E1000E_RDLEN) / E1000_RING_DESC_LEN;
+    uint32_t tail = e1000e_macreg_read(d, E1000_RDT);
+    uint32_t len = e1000e_macreg_read(d, E1000_RDLEN) / E1000_RING_DESC_LEN;
 
     qtest_memwrite(d_pci->pci_dev.bus->qts,
                    d->rx_ring + tail * E1000_RING_DESC_LEN,
                    descr, E1000_RING_DESC_LEN);
-    e1000e_macreg_write(d, E1000E_RDT, (tail + 1) % len);
+    e1000e_macreg_write(d, E1000_RDT, (tail + 1) % len);
 
     /* Read WB data for the packet received */
     qtest_memread(d_pci->pci_dev.bus->qts,
@@ -145,8 +145,8 @@ static void e1000e_pci_start_hw(QOSGraphObject *obj)
                            (uint32_t) d->e1000e.tx_ring);
     e1000e_macreg_write(&d->e1000e, E1000_TDBAH,
                            (uint32_t) (d->e1000e.tx_ring >> 32));
-    e1000e_macreg_write(&d->e1000e, E1000E_TDLEN, E1000E_RING_LEN);
-    e1000e_macreg_write(&d->e1000e, E1000E_TDT, 0);
+    e1000e_macreg_write(&d->e1000e, E1000_TDLEN, E1000E_RING_LEN);
+    e1000e_macreg_write(&d->e1000e, E1000_TDT, 0);
     e1000e_macreg_write(&d->e1000e, E1000_TDH, 0);
 
     /* Enable transmit */
@@ -156,8 +156,8 @@ static void e1000e_pci_start_hw(QOSGraphObject *obj)
                            (uint32_t)d->e1000e.rx_ring);
     e1000e_macreg_write(&d->e1000e, E1000_RDBAH,
                            (uint32_t)(d->e1000e.rx_ring >> 32));
-    e1000e_macreg_write(&d->e1000e, E1000E_RDLEN, E1000E_RING_LEN);
-    e1000e_macreg_write(&d->e1000e, E1000E_RDT, 0);
+    e1000e_macreg_write(&d->e1000e, E1000_RDLEN, E1000E_RING_LEN);
+    e1000e_macreg_write(&d->e1000e, E1000_RDT, 0);
     e1000e_macreg_write(&d->e1000e, E1000_RDH, 0);
 
     /* Enable receive */
diff --git a/tests/qtest/libqos/e1000e.h b/tests/qtest/libqos/e1000e.h
index 3bf285af42..091ce139da 100644
--- a/tests/qtest/libqos/e1000e.h
+++ b/tests/qtest/libqos/e1000e.h
@@ -25,11 +25,6 @@
 #define E1000E_RX0_MSG_ID           (0)
 #define E1000E_TX0_MSG_ID           (1)
 
-#define E1000E_TDLEN    (0x3808)
-#define E1000E_TDT      (0x3818)
-#define E1000E_RDLEN    (0x2808)
-#define E1000E_RDT      (0x2818)
-
 typedef struct QE1000E QE1000E;
 typedef struct QE1000E_PCI QE1000E_PCI;
 
-- 
2.39.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]