[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 12/21] hw/dma/xilinx_axidma: Check DMASR.HALTED to prevent infinit
|
From: |
Peter Maydell |
|
Subject: |
[PULL 12/21] hw/dma/xilinx_axidma: Check DMASR.HALTED to prevent infinite loop. |
|
Date: |
Tue, 30 May 2023 14:26:11 +0100 |
From: Tommy Wu <tommy.wu@sifive.com>
When we receive a packet from the xilinx_axienet and then try to s2mem
through the xilinx_axidma, if the descriptor ring buffer is full in the
xilinx axidma driver, we’ll assert the DMASR.HALTED in the
function : stream_process_s2mem and return 0. In the end, we’ll be stuck in
an infinite loop in axienet_eth_rx_notify.
This patch checks the DMASR.HALTED state when we try to push data
from xilinx axi-enet to xilinx axi-dma. When the DMASR.HALTED is asserted,
we will not keep pushing the data and then prevent the infinte loop.
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-id: 20230519062137.1251741-1-tommy.wu@sifive.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/dma/xilinx_axidma.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/hw/dma/xilinx_axidma.c b/hw/dma/xilinx_axidma.c
index 6030c764352..12c90267df6 100644
--- a/hw/dma/xilinx_axidma.c
+++ b/hw/dma/xilinx_axidma.c
@@ -168,6 +168,11 @@ static inline int stream_idle(struct Stream *s)
return !!(s->regs[R_DMASR] & DMASR_IDLE);
}
+static inline int stream_halted(struct Stream *s)
+{
+ return !!(s->regs[R_DMASR] & DMASR_HALTED);
+}
+
static void stream_reset(struct Stream *s)
{
s->regs[R_DMASR] = DMASR_HALTED; /* starts up halted. */
@@ -269,7 +274,7 @@ static void stream_process_mem2s(struct Stream *s,
StreamSink *tx_data_dev,
uint64_t addr;
bool eop;
- if (!stream_running(s) || stream_idle(s)) {
+ if (!stream_running(s) || stream_idle(s) || stream_halted(s)) {
return;
}
@@ -326,7 +331,7 @@ static size_t stream_process_s2mem(struct Stream *s,
unsigned char *buf,
unsigned int rxlen;
size_t pos = 0;
- if (!stream_running(s) || stream_idle(s)) {
+ if (!stream_running(s) || stream_idle(s) || stream_halted(s)) {
return 0;
}
@@ -407,7 +412,7 @@ xilinx_axidma_data_stream_can_push(StreamSink *obj,
XilinxAXIDMAStreamSink *ds = XILINX_AXI_DMA_DATA_STREAM(obj);
struct Stream *s = &ds->dma->streams[1];
- if (!stream_running(s) || stream_idle(s)) {
+ if (!stream_running(s) || stream_idle(s) || stream_halted(s)) {
ds->dma->notify = notify;
ds->dma->notify_opaque = notify_opaque;
return false;
--
2.34.1
- [PULL 04/21] hw/arm/smmuv3: Refactor stage-1 PTW, (continued)
- [PULL 04/21] hw/arm/smmuv3: Refactor stage-1 PTW, Peter Maydell, 2023/05/30
- [PULL 15/21] target/arm: Explicitly select short-format FSR for M-profile, Peter Maydell, 2023/05/30
- [PULL 18/21] arm/Kconfig: Make TCG dependence explicit, Peter Maydell, 2023/05/30
- [PULL 03/21] hw/arm/smmuv3: Update translation config to hold stage-2, Peter Maydell, 2023/05/30
- [PULL 08/21] hw/arm/smmuv3: Add VMID to TLB tagging, Peter Maydell, 2023/05/30
- [PULL 10/21] hw/arm/smmuv3: Add stage-2 support in iova notifier, Peter Maydell, 2023/05/30
- [PULL 11/21] hw/arm/smmuv3: Add knob to choose translation stage and enable stage-2, Peter Maydell, 2023/05/30
- [PULL 17/21] arm/Kconfig: Keep Kconfig default entries in default.mak as documentation, Peter Maydell, 2023/05/30
- [PULL 13/21] hw/arm/xlnx-zynqmp: fix unsigned error when checking the RPUs number, Peter Maydell, 2023/05/30
- [PULL 02/21] hw/arm/smmuv3: Add missing fields for IDR0, Peter Maydell, 2023/05/30
- [PULL 12/21] hw/dma/xilinx_axidma: Check DMASR.HALTED to prevent infinite loop.,
Peter Maydell <=
- [PULL 01/21] fsl-imx6: Add SNVS support for i.MX6 boards, Peter Maydell, 2023/05/30
- [PULL 09/21] hw/arm/smmuv3: Add CMDs related to stage-2, Peter Maydell, 2023/05/30
- [PULL 19/21] Update copyright dates to 2023, Peter Maydell, 2023/05/30
- [PULL 06/21] hw/arm/smmuv3: Parse STE config for stage-2, Peter Maydell, 2023/05/30
- [PULL 05/21] hw/arm/smmuv3: Add page table walk for stage-2, Peter Maydell, 2023/05/30
- [PULL 14/21] tests/qtest: Run arm-specific tests only if the required machine is available, Peter Maydell, 2023/05/30
- [PULL 20/21] hw/arm/sbsa-ref: add GIC node into DT, Peter Maydell, 2023/05/30
- [PULL 21/21] docs: sbsa: correct graphics card name, Peter Maydell, 2023/05/30
- [PULL 16/21] target/arm: Explain why we need to select ARM_V7M, Peter Maydell, 2023/05/30
- [PULL 07/21] hw/arm/smmuv3: Make TLB lookup work for stage-2, Peter Maydell, 2023/05/30