[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 20/21] hw/arm/sbsa-ref: add GIC node into DT
|
From: |
Peter Maydell |
|
Subject: |
[PULL 20/21] hw/arm/sbsa-ref: add GIC node into DT |
|
Date: |
Tue, 30 May 2023 14:26:19 +0100 |
From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Let add GIC information into DeviceTree as part of SBSA-REF versioning.
Trusted Firmware will read it and provide to next firmware level.
Bumps platform version to 0.1 one so we can check is node is present.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/sbsa-ref.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
index 9c3e670ec65..de21200ff93 100644
--- a/hw/arm/sbsa-ref.c
+++ b/hw/arm/sbsa-ref.c
@@ -29,6 +29,7 @@
#include "exec/hwaddr.h"
#include "kvm_arm.h"
#include "hw/arm/boot.h"
+#include "hw/arm/fdt.h"
#include "hw/arm/smmuv3.h"
#include "hw/block/flash.h"
#include "hw/boards.h"
@@ -168,6 +169,20 @@ static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState
*sms, int idx)
return arm_cpu_mp_affinity(idx, clustersz);
}
+static void sbsa_fdt_add_gic_node(SBSAMachineState *sms)
+{
+ char *nodename;
+
+ nodename = g_strdup_printf("/intc");
+ qemu_fdt_add_subnode(sms->fdt, nodename);
+ qemu_fdt_setprop_sized_cells(sms->fdt, nodename, "reg",
+ 2, sbsa_ref_memmap[SBSA_GIC_DIST].base,
+ 2, sbsa_ref_memmap[SBSA_GIC_DIST].size,
+ 2, sbsa_ref_memmap[SBSA_GIC_REDIST].base,
+ 2, sbsa_ref_memmap[SBSA_GIC_REDIST].size);
+
+ g_free(nodename);
+}
/*
* Firmware on this machine only uses ACPI table to load OS, these limited
* device tree nodes are just to let firmware know the info which varies from
@@ -204,7 +219,7 @@ static void create_fdt(SBSAMachineState *sms)
* fw compatibility.
*/
qemu_fdt_setprop_cell(fdt, "/", "machine-version-major", 0);
- qemu_fdt_setprop_cell(fdt, "/", "machine-version-minor", 0);
+ qemu_fdt_setprop_cell(fdt, "/", "machine-version-minor", 1);
if (ms->numa_state->have_numa_distance) {
int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t);
@@ -260,6 +275,8 @@ static void create_fdt(SBSAMachineState *sms)
g_free(nodename);
}
+
+ sbsa_fdt_add_gic_node(sms);
}
#define SBSA_FLASH_SECTOR_SIZE (256 * KiB)
--
2.34.1
- [PULL 17/21] arm/Kconfig: Keep Kconfig default entries in default.mak as documentation, (continued)
- [PULL 17/21] arm/Kconfig: Keep Kconfig default entries in default.mak as documentation, Peter Maydell, 2023/05/30
- [PULL 13/21] hw/arm/xlnx-zynqmp: fix unsigned error when checking the RPUs number, Peter Maydell, 2023/05/30
- [PULL 02/21] hw/arm/smmuv3: Add missing fields for IDR0, Peter Maydell, 2023/05/30
- [PULL 12/21] hw/dma/xilinx_axidma: Check DMASR.HALTED to prevent infinite loop., Peter Maydell, 2023/05/30
- [PULL 01/21] fsl-imx6: Add SNVS support for i.MX6 boards, Peter Maydell, 2023/05/30
- [PULL 09/21] hw/arm/smmuv3: Add CMDs related to stage-2, Peter Maydell, 2023/05/30
- [PULL 19/21] Update copyright dates to 2023, Peter Maydell, 2023/05/30
- [PULL 06/21] hw/arm/smmuv3: Parse STE config for stage-2, Peter Maydell, 2023/05/30
- [PULL 05/21] hw/arm/smmuv3: Add page table walk for stage-2, Peter Maydell, 2023/05/30
- [PULL 14/21] tests/qtest: Run arm-specific tests only if the required machine is available, Peter Maydell, 2023/05/30
- [PULL 20/21] hw/arm/sbsa-ref: add GIC node into DT,
Peter Maydell <=
- [PULL 21/21] docs: sbsa: correct graphics card name, Peter Maydell, 2023/05/30
- [PULL 16/21] target/arm: Explain why we need to select ARM_V7M, Peter Maydell, 2023/05/30
- [PULL 07/21] hw/arm/smmuv3: Make TLB lookup work for stage-2, Peter Maydell, 2023/05/30
- Re: [PULL 00/21] target-arm queue, Richard Henderson, 2023/05/30