[PULL 02/26] hw/i2c/aspeed: Fix Tx count and Rx size error in buffer pool mode

[Cédric Le Goater]

From: Hang Yu <francis_yuu@stu.pku.edu.cn>

Fixed inconsistency between the regisiter bit field definition header file
and the ast2600 datasheet. The reg name is I2CD1C:Pool Buffer Control
Register in old register mode and  I2CC0C: Master/Slave Pool Buffer Control
Register in new register mode. They share bit field
[12:8]:Transmit Data Byte Count and bit field
[29:24]:Actual Received Pool Buffer Size according to the datasheet.
According to the ast2600 datasheet,the actual Tx count is
Transmit Data Byte Count plus 1, and the max Rx size is
Receive Pool Buffer Size plus 1, both in Pool Buffer Control Register.
The version before forgot to plus 1, and mistake Rx count for Rx size.

Signed-off-by: Hang Yu <francis_yuu@stu.pku.edu.cn>
Fixes: 3be3d6ccf2ad ("aspeed: i2c: Migrate to registerfields API")
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 include/hw/i2c/aspeed_i2c.h | 4 ++--
 hw/i2c/aspeed_i2c.c         | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h
index 51c944efeaae..2e1e15aaf0f7 100644
--- a/include/hw/i2c/aspeed_i2c.h
+++ b/include/hw/i2c/aspeed_i2c.h
@@ -139,9 +139,9 @@ REG32(I2CD_CMD, 0x14) /* I2CD Command/Status */
 REG32(I2CD_DEV_ADDR, 0x18) /* Slave Device Address */
     SHARED_FIELD(SLAVE_DEV_ADDR1, 0, 7)
 REG32(I2CD_POOL_CTRL, 0x1C) /* Pool Buffer Control */
-    SHARED_FIELD(RX_COUNT, 24, 5)
+    SHARED_FIELD(RX_COUNT, 24, 6)
     SHARED_FIELD(RX_SIZE, 16, 5)
-    SHARED_FIELD(TX_COUNT, 9, 5)
+    SHARED_FIELD(TX_COUNT, 8, 5)
     FIELD(I2CD_POOL_CTRL, OFFSET, 2, 6) /* AST2400 */
 REG32(I2CD_BYTE_BUF, 0x20) /* Transmit/Receive Byte Buffer */
     SHARED_FIELD(RX_BUF, 8, 8)
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index 1f071a3811f7..e485d8bfb836 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -236,7 +236,7 @@ static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t 
pool_start)
     uint32_t reg_byte_buf = aspeed_i2c_bus_byte_buf_offset(bus);
     uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
     int pool_tx_count = SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl,
-                                                TX_COUNT);
+                                                TX_COUNT) + 1;
 
     if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN)) {
         for (i = pool_start; i < pool_tx_count; i++) {
@@ -293,7 +293,7 @@ static void aspeed_i2c_bus_recv(AspeedI2CBus *bus)
     uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
     uint32_t reg_dma_addr = aspeed_i2c_bus_dma_addr_offset(bus);
     int pool_rx_count = SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl,
-                                                RX_COUNT);
+                                                RX_SIZE) + 1;
 
     if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_BUFF_EN)) {
         uint8_t *pool_base = aic->bus_pool_base(bus);
@@ -418,7 +418,7 @@ static void aspeed_i2c_bus_cmd_dump(AspeedI2CBus *bus)
     uint32_t reg_intr_sts = aspeed_i2c_bus_intr_sts_offset(bus);
     uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
     if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_BUFF_EN)) {
-        count = SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl, TX_COUNT);
+        count = SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl, TX_COUNT) + 
1;
     } else if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_DMA_EN)) {
         count = bus->regs[reg_dma_len];
     } else { /* BYTE mode */
@@ -490,7 +490,7 @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, 
uint64_t value)
          */
         if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN)) {
             if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl, TX_COUNT)
-                == 1) {
+                == 0) {
                 SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_TX_CMD, 0);
             } else {
                 /*
-- 
2.41.0