[PATCH RFC] hw/sh4/sh7750: Add STBCR/STBCR2 register support

[Geert Uytterhoeven]

The new Linux SH7750 clock driver uses the registers for power-down
mode control, causing a crash:

    byte read to SH7750_STBCR_A7 (0x000000001fc00004) not supported
    Aborted (core dumped)

Fix this by adding support for the Standby Control Registers STBCR and
STBCR2.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
[RFC PATCH v3 12/35] drivers/clk/renesas: clk-sh7750.c SH7750/7751 CPG driver.
https://lore.kernel.org/all/a772e1b6de89af22057d3af31cc03dcad7964fc7.1697199949.git.ysato@users.sourceforge.jp

Accesses to CLKSTP00 and CLKSTCLK00 (0xfe0a0000/0x1e0a0000 and
0xfe0a0008/0x1e0a0008) don't seem to cause any issues, although I can't
see immediately where they are handled?

---
 hw/sh4/sh7750.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/hw/sh4/sh7750.c b/hw/sh4/sh7750.c
index ebe0fd96d94ca17b..deeb83b4540bbf2b 100644
--- a/hw/sh4/sh7750.c
+++ b/hw/sh4/sh7750.c
@@ -59,6 +59,9 @@ typedef struct SH7750State {
     uint16_t bcr3;
     uint32_t bcr4;
     uint16_t rfcr;
+    /* Power-Down Modes */
+    uint8_t stbcr;
+    uint8_t stbcr2;
     /* PCMCIA controller */
     uint16_t pcr;
     /* IO ports */
@@ -219,7 +222,13 @@ static void ignore_access(const char *kind, hwaddr addr)
 
 static uint32_t sh7750_mem_readb(void *opaque, hwaddr addr)
 {
+    SH7750State *s = opaque;
+
     switch (addr) {
+    case SH7750_STBCR_A7:
+        return s->stbcr;
+    case SH7750_STBCR2_A7:
+        return s->stbcr2;
     default:
         error_access("byte read", addr);
         abort();
@@ -318,14 +327,24 @@ static uint32_t sh7750_mem_readl(void *opaque, hwaddr 
addr)
 static void sh7750_mem_writeb(void *opaque, hwaddr addr,
                               uint32_t mem_value)
 {
+    SH7750State *s = opaque;
 
     if (is_in_sdrmx(addr, 2) || is_in_sdrmx(addr, 3)) {
         ignore_access("byte write", addr);
         return;
     }
 
-    error_access("byte write", addr);
-    abort();
+    switch (addr) {
+    case SH7750_STBCR_A7:
+        s->stbcr = mem_value;
+        return;
+    case SH7750_STBCR2_A7:
+        s->stbcr2 = mem_value;
+        return;
+    default:
+        error_access("byte write", addr);
+        abort();
+    }
 }
 
 static void sh7750_mem_writew(void *opaque, hwaddr addr,
-- 
2.34.1