Re: [PATCH v7 4/5] migration: Introduce 'qatzip' compression method

[Fabiano Rosas]

Yichen Wang <yichen.wang@bytedance.com> writes:

> From: Bryan Zhang <bryan.zhang@bytedance.com>
>
> Adds support for 'qatzip' as an option for the multifd compression
> method parameter, and implements using QAT for 'qatzip' compression and
> decompression.
>
> Signed-off-by: Bryan Zhang <bryan.zhang@bytedance.com>
> Signed-off-by: Hao Xiang <hao.xiang@linux.dev>
> Signed-off-by: Yichen Wang <yichen.wang@bytedance.com>
> Acked-by: Markus Armbruster <armbru@redhat.com>
> ---
>  hw/core/qdev-properties-system.c |   2 +-
>  migration/meson.build            |   1 +
>  migration/multifd-qatzip.c       | 394 +++++++++++++++++++++++++++++++
>  migration/multifd.h              |   5 +-
>  qapi/migration.json              |   3 +
>  5 files changed, 402 insertions(+), 3 deletions(-)
>  create mode 100644 migration/multifd-qatzip.c
>
> diff --git a/hw/core/qdev-properties-system.c 
> b/hw/core/qdev-properties-system.c
> index f13350b4fb..a56fbf728d 100644
> --- a/hw/core/qdev-properties-system.c
> +++ b/hw/core/qdev-properties-system.c
> @@ -659,7 +659,7 @@ const PropertyInfo qdev_prop_fdc_drive_type = {
>  const PropertyInfo qdev_prop_multifd_compression = {
>      .name = "MultiFDCompression",
>      .description = "multifd_compression values, "
> -                   "none/zlib/zstd/qpl/uadk",
> +                   "none/zlib/zstd/qpl/uadk/qatzip",
>      .enum_table = &MultiFDCompression_lookup,
>      .get = qdev_propinfo_get_enum,
>      .set = qdev_propinfo_set_enum,
> diff --git a/migration/meson.build b/migration/meson.build
> index 5ce2acb41e..c9454c26ae 100644
> --- a/migration/meson.build
> +++ b/migration/meson.build
> @@ -41,6 +41,7 @@ system_ss.add(when: rdma, if_true: files('rdma.c'))
>  system_ss.add(when: zstd, if_true: files('multifd-zstd.c'))
>  system_ss.add(when: qpl, if_true: files('multifd-qpl.c'))
>  system_ss.add(when: uadk, if_true: files('multifd-uadk.c'))
> +system_ss.add(when: qatzip, if_true: files('multifd-qatzip.c'))
>  
>  specific_ss.add(when: 'CONFIG_SYSTEM_ONLY',
>                  if_true: files('ram.c',
> diff --git a/migration/multifd-qatzip.c b/migration/multifd-qatzip.c
> new file mode 100644
> index 0000000000..3c787ed879
> --- /dev/null
> +++ b/migration/multifd-qatzip.c
> @@ -0,0 +1,394 @@
> +/*
> + * Multifd QATzip compression implementation
> + *
> + * Copyright (c) Bytedance
> + *
> + * Authors:
> + *  Bryan Zhang <bryan.zhang@bytedance.com>
> + *  Hao Xiang <hao.xiang@bytedance.com>
> + *  Yichen Wang <yichen.wang@bytedance.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "exec/ramblock.h"
> +#include "qapi/error.h"
> +#include "qemu/error-report.h"
> +#include "qapi/qapi-types-migration.h"
> +#include "options.h"
> +#include "multifd.h"
> +#include <qatzip.h>
> +
> +typedef struct {
> +    /*
> +     * Unique session for use with QATzip API
> +     */
> +    QzSession_T sess;
> +
> +    /*
> +     * For compression: Buffer for pages to compress
> +     * For decompression: Buffer for data to decompress
> +     */
> +    uint8_t *in_buf;
> +    uint32_t in_len;
> +
> +    /*
> +     * For compression: Output buffer of compressed data
> +     * For decompression: Output buffer of decompressed data
> +     */
> +    uint8_t *out_buf;
> +    uint32_t out_len;
> +} QatzipData;
> +
> +/**
> + * qatzip_send_setup: Set up QATzip session and private buffers.
> + *
> + * @param p    Multifd channel params
> + * @param errp Pointer to error, which will be set in case of error
> + * @return     0 on success, -1 on error (and *errp will be set)
> + */
> +static int qatzip_send_setup(MultiFDSendParams *p, Error **errp)
> +{
> +    QatzipData *q;
> +    QzSessionParamsDeflate_T params;
> +    const char *err_msg;
> +    int ret;
> +
> +    q = g_new0(QatzipData, 1);
> +    p->compress_data = q;
> +    /* We need one extra place for the packet header */
> +    p->iov = g_new0(struct iovec, 2);
> +
> +    /*
> +     * Initialize QAT device with software fallback by default. This allows
> +     * QATzip to use CPU path when QAT hardware reaches maximum throughput.
> +     */
> +    ret = qzInit(&q->sess, true);
> +    if (ret != QZ_OK && ret != QZ_DUPLICATE) {
> +        err_msg = "qzInit failed";
> +        goto err;
> +    }
> +
> +    ret = qzGetDefaultsDeflate(&params);
> +    if (ret != QZ_OK) {
> +        err_msg = "qzGetDefaultsDeflate failed";
> +        goto err;
> +    }
> +
> +    /* Make sure to use configured QATzip compression level. */
> +    params.common_params.comp_lvl = migrate_multifd_qatzip_level();
> +    ret = qzSetupSessionDeflate(&q->sess, &params);
> +    if (ret != QZ_OK && ret != QZ_DUPLICATE) {
> +        err_msg = "qzSetupSessionDeflate failed";
> +        goto err;
> +    }
> +
> +    if (MULTIFD_PACKET_SIZE > UINT32_MAX) {
> +        err_msg = "packet size too large for QAT";
> +        goto err;
> +    }
> +
> +    q->in_len = MULTIFD_PACKET_SIZE;
> +    /*
> +     * PINNED_MEM is an enum from qatzip headers, which means to use
> +     * kzalloc_node() to allocate memory for QAT DMA purposes. When QAT 
> device
> +     * is not available or software fallback is used, the malloc flag needs 
> to
> +     * be set as COMMON_MEM.
> +     */
> +    q->in_buf = qzMalloc(q->in_len, 0, PINNED_MEM);
> +    if (!q->in_buf) {
> +        q->in_buf = qzMalloc(q->in_len, 0, COMMON_MEM);
> +        if (!q->in_buf) {
> +            err_msg = "qzMalloc failed";
> +            goto err;
> +        }
> +    }
> +
> +    q->out_len = qzMaxCompressedLength(MULTIFD_PACKET_SIZE, &q->sess);
> +    q->out_buf = qzMalloc(q->out_len, 0, PINNED_MEM);
> +    if (!q->out_buf) {
> +        q->out_buf = qzMalloc(q->out_len, 0, COMMON_MEM);
> +        if (!q->out_buf) {
> +            err_msg = "qzMalloc failed";
> +            goto err;
> +        }
> +    }
> +
> +    return 0;
> +
> +err:
> +    error_setg(errp, "multifd %u: [sender] %s", p->id, err_msg);
> +    return -1;
> +}
> +
> +/**
> + * qatzip_send_cleanup: Tear down QATzip session and release private buffers.
> + *
> + * @param p    Multifd channel params
> + * @param errp Pointer to error, which will be set in case of error
> + * @return     None
> + */
> +static void qatzip_send_cleanup(MultiFDSendParams *p, Error **errp)
> +{
> +    QatzipData *q = p->compress_data;
> +
> +    if (q) {
> +        if (q->in_buf) {
> +            qzFree(q->in_buf);
> +        }
> +        if (q->out_buf) {
> +            qzFree(q->out_buf);
> +        }
> +        (void)qzTeardownSession(&q->sess);
> +        (void)qzClose(&q->sess);
> +        g_free(q);
> +    }
> +
> +    g_free(p->iov);
> +    p->iov = NULL;
> +    p->compress_data = NULL;
> +}
> +
> +/**
> + * qatzip_send_prepare: Compress pages and update IO channel info.
> + *
> + * @param p    Multifd channel params
> + * @param errp Pointer to error, which will be set in case of error
> + * @return     0 on success, -1 on error (and *errp will be set)
> + */
> +static int qatzip_send_prepare(MultiFDSendParams *p, Error **errp)
> +{
> +    MultiFDPages_t *pages = p->pages;
> +    QatzipData *q = p->compress_data;
> +    int ret;
> +    unsigned int in_len, out_len;
> +
> +    if (!multifd_send_prepare_common(p)) {
> +        goto out;
> +    }
> +
> +    /*
> +     * Unlike other multifd compression implementations, we use a 
> non-streaming
> +     * API and place all the data into one buffer, rather than sending each
> +     * page to the compression API at a time. Based on initial benchmarks, 
> the
> +     * non-streaming API outperforms the streaming API. Plus, the logic in 
> QEMU
> +     * is friendly to using the non-streaming API anyway. If either of these
> +     * statements becomes no longer true, we can revisit adding a streaming
> +     * implementation.
> +     */
> +    for (int i = 0; i < pages->normal_num; i++) {
> +        memcpy(q->in_buf + (i * p->page_size),
> +               pages->block->host + pages->offset[i],
> +               p->page_size);
> +    }
> +
> +    in_len = pages->normal_num * p->page_size;
> +    if (in_len > q->in_len) {
> +        error_setg(errp, "multifd %u: unexpectedly large input", p->id);
> +        return -1;
> +    }
> +    out_len = q->out_len;
> +
> +    ret = qzCompress(&q->sess, q->in_buf, &in_len, q->out_buf, &out_len, 1);
> +    if (ret != QZ_OK) {
> +        error_setg(errp, "multifd %u: QATzip returned %d instead of QZ_OK",
> +                   p->id, ret);
> +        return -1;
> +    }
> +    if (in_len != pages->normal_num * p->page_size) {
> +        error_setg(errp, "multifd %u: QATzip failed to compress all input",
> +                   p->id);
> +        return -1;
> +    }
> +
> +    p->iov[p->iovs_num].iov_base = q->out_buf;
> +    p->iov[p->iovs_num].iov_len = out_len;
> +    p->iovs_num++;
> +    p->next_packet_size = out_len;
> +
> +out:
> +    p->flags |= MULTIFD_FLAG_QATZIP;
> +    multifd_send_fill_packet(p);
> +    return 0;
> +}
> +
> +/**
> + * qatzip_recv_setup: Set up QATzip session and allocate private buffers.
> + *
> + * @param p    Multifd channel params
> + * @param errp Pointer to error, which will be set in case of error
> + * @return     0 on success, -1 on error (and *errp will be set)
> + */
> +static int qatzip_recv_setup(MultiFDRecvParams *p, Error **errp)
> +{
> +    QatzipData *q;
> +    QzSessionParamsDeflate_T params;
> +    const char *err_msg;
> +    int ret;
> +
> +    q = g_new0(QatzipData, 1);
> +    p->compress_data = q;
> +
> +    /*
> +     * Initialize QAT device with software fallback by default. This allows
> +     * QATzip to use CPU path when QAT hardware reaches maximum throughput.
> +     */
> +    ret = qzInit(&q->sess, true);
> +    if (ret != QZ_OK && ret != QZ_DUPLICATE) {
> +        err_msg = "qzInit failed";
> +        goto err;
> +    }
> +
> +    ret = qzGetDefaultsDeflate(&params);
> +    if (ret != QZ_OK) {
> +        err_msg = "qzGetDefaultsDeflate failed";
> +        goto err;
> +    }
> +
> +    ret = qzSetupSessionDeflate(&q->sess, &params);
> +    if (ret != QZ_OK && ret != QZ_DUPLICATE) {
> +        err_msg = "qzSetupSessionDeflate failed";
> +        goto err;
> +    }
> +
> +    /*
> +     * Reserve extra spaces for the incoming packets. Current implementation
> +     * doesn't send uncompressed pages in case the compression gets too big.
> +     */
> +    q->in_len = MULTIFD_PACKET_SIZE * 2;
> +    /*
> +     * PINNED_MEM is an enum from qatzip headers, which means to use
> +     * kzalloc_node() to allocate memory for QAT DMA purposes. When QAT 
> device
> +     * is not available or software fallback is used, the malloc flag needs 
> to
> +     * be set as COMMON_MEM.
> +     */
> +    q->in_buf = qzMalloc(q->in_len, 0, PINNED_MEM);
> +    if (!q->in_buf) {
> +        q->in_buf = qzMalloc(q->in_len, 0, COMMON_MEM);
> +        if (!q->in_buf) {
> +            err_msg = "qzMalloc failed";
> +            goto err;
> +        }
> +    }
> +
> +    q->out_len = MULTIFD_PACKET_SIZE;
> +    q->out_buf = qzMalloc(q->out_len, 0, PINNED_MEM);
> +    if (!q->out_buf) {
> +        q->out_buf = qzMalloc(q->out_len, 0, COMMON_MEM);
> +        if (!q->out_buf) {
> +            err_msg = "qzMalloc failed";
> +            goto err;
> +        }
> +    }
> +
> +    return 0;
> +
> +err:
> +    error_setg(errp, "multifd %u: [receiver] %s", p->id, err_msg);
> +    return -1;
> +}
> +
> +/**
> + * qatzip_recv_cleanup: Tear down QATzip session and release private buffers.
> + *
> + * @param p    Multifd channel params
> + * @return     None
> + */
> +static void qatzip_recv_cleanup(MultiFDRecvParams *p)
> +{
> +    QatzipData *q = p->compress_data;
> +
> +    if (q) {
> +        if (q->in_buf) {
> +            qzFree(q->in_buf);
> +        }
> +        if (q->out_buf) {
> +            qzFree(q->out_buf);
> +        }
> +        (void)qzTeardownSession(&q->sess);
> +        (void)qzClose(&q->sess);
> +        g_free(q);
> +    }
> +    p->compress_data = NULL;
> +}
> +
> +
> +/**
> + * qatzip_recv: Decompress pages and copy them to the appropriate
> + * locations.
> + *
> + * @param p    Multifd channel params
> + * @param errp Pointer to error, which will be set in case of error
> + * @return     0 on success, -1 on error (and *errp will be set)
> + */
> +static int qatzip_recv(MultiFDRecvParams *p, Error **errp)
> +{
> +    QatzipData *q = p->compress_data;
> +    int ret;
> +    unsigned int in_len, out_len;
> +    uint32_t in_size = p->next_packet_size;
> +    uint32_t expected_size = p->normal_num * p->page_size;
> +    uint32_t flags = p->flags & MULTIFD_FLAG_COMPRESSION_MASK;
> +
> +    if (in_size > q->in_len) {
> +        error_setg(errp, "multifd %u: received unexpectedly large packet",
> +                   p->id);
> +        return -1;
> +    }
> +
> +    if (flags != MULTIFD_FLAG_QATZIP) {
> +        error_setg(errp, "multifd %u: flags received %x flags expected %x",
> +                   p->id, flags, MULTIFD_FLAG_QATZIP);
> +        return -1;
> +    }
> +
> +    multifd_recv_zero_page_process(p);
> +    if (!p->normal_num) {
> +        assert(in_size == 0);
> +        return 0;
> +    }
> +
> +    ret = qio_channel_read_all(p->c, (void *)q->in_buf, in_size, errp);
> +    if (ret != 0) {
> +        return ret;
> +    }
> +
> +    in_len = in_size;
> +    out_len = q->out_len;
> +    ret = qzDecompress(&q->sess, q->in_buf, &in_len, q->out_buf, &out_len);
> +    if (ret != QZ_OK) {
> +        error_setg(errp, "multifd %u: qzDecompress failed", p->id);
> +        return -1;
> +    }
> +    if (out_len != expected_size) {
> +        error_setg(errp, "multifd %u: packet size received %u size expected 
> %u",
> +                   p->id, out_len, expected_size);
> +        return -1;
> +    }
> +
> +    /* Copy each page to its appropriate location. */
> +    for (int i = 0; i < p->normal_num; i++) {
> +        memcpy(p->host + p->normal[i],
> +               q->out_buf + p->page_size * i,
> +               p->page_size);
> +    }
> +    return 0;
> +}
> +
> +static MultiFDMethods multifd_qatzip_ops = {
> +    .send_setup = qatzip_send_setup,
> +    .send_cleanup = qatzip_send_cleanup,
> +    .send_prepare = qatzip_send_prepare,
> +    .recv_setup = qatzip_recv_setup,
> +    .recv_cleanup = qatzip_recv_cleanup,
> +    .recv = qatzip_recv
> +};
> +
> +static void multifd_qatzip_register(void)
> +{
> +    multifd_register_ops(MULTIFD_COMPRESSION_QATZIP, &multifd_qatzip_ops);
> +}
> +
> +migration_init(multifd_qatzip_register);
> diff --git a/migration/multifd.h b/migration/multifd.h
> index 0ecd6f47d7..adceb65050 100644
> --- a/migration/multifd.h
> +++ b/migration/multifd.h
> @@ -34,14 +34,15 @@ MultiFDRecvData *multifd_get_recv_data(void);
>  /* Multifd Compression flags */
>  #define MULTIFD_FLAG_SYNC (1 << 0)
>  
> -/* We reserve 4 bits for compression methods */
> -#define MULTIFD_FLAG_COMPRESSION_MASK (0xf << 1)
> +/* We reserve 5 bits for compression methods */
> +#define MULTIFD_FLAG_COMPRESSION_MASK (0x1f << 1)
>  /* we need to be compatible. Before compression value was 0 */
>  #define MULTIFD_FLAG_NOCOMP (0 << 1)
>  #define MULTIFD_FLAG_ZLIB (1 << 1)
>  #define MULTIFD_FLAG_ZSTD (2 << 1)
>  #define MULTIFD_FLAG_QPL (4 << 1)
>  #define MULTIFD_FLAG_UADK (8 << 1)
> +#define MULTIFD_FLAG_QATZIP (16 << 1)
>  
>  /* This value needs to be a multiple of qemu_target_page_size() */
>  #define MULTIFD_PACKET_SIZE (512 * 1024)
> diff --git a/qapi/migration.json b/qapi/migration.json
> index 279a705cae..dc65f90b44 100644
> --- a/qapi/migration.json
> +++ b/qapi/migration.json
> @@ -561,6 +561,8 @@
>  #
>  # @zstd: use zstd compression method.
>  #
> +# @qatzip: use qatzip compression method. (Since 9.1)
> +#

Since 9.2

>  # @qpl: use qpl compression method.  Query Processing Library(qpl) is
>  #     based on the deflate compression algorithm and use the Intel
>  #     In-Memory Analytics Accelerator(IAA) accelerated compression and
> @@ -573,6 +575,7 @@
>  { 'enum': 'MultiFDCompression',
>    'data': [ 'none', 'zlib',
>              { 'name': 'zstd', 'if': 'CONFIG_ZSTD' },
> +            { 'name': 'qatzip', 'if': 'CONFIG_QATZIP'},
>              { 'name': 'qpl', 'if': 'CONFIG_QPL' },
>              { 'name': 'uadk', 'if': 'CONFIG_UADK' } ] }

Reviewed-by: Fabiano Rosas <farosas@suse.de>