[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-discuss] Starting qemu with virtio and .raw image file
From: |
Supriya Kher |
Subject: |
[Qemu-discuss] Starting qemu with virtio and .raw image file |
Date: |
Fri, 13 Jul 2012 00:10:12 -0700 |
Hi,
I am using qemu-system_x86_64 to create a nested virtualization setup.
The inner guest VM is seen to be very slow. In order to improve guest
VM performance I have been attempting to start external/outer VM using
virtio option. However I encounter kernel crashes/failures each time.
I start the outer VM running on Ubuntu using the following command
line ( The VM image resides as a disk file of .raw format)
# start qemu-kvm
sudo $TOOLKIT_PATH/bin/qemu-system-x86_64 -nographic \
-echr 20 \
-cpu host \
-m $MEMORY_SIZE \
-smp $NUM_VCPUS \
-drive file=$IMAGE_DISK,if=ide \
$interfaces
Option 1:
Changed if=ide to if=virtio
sudo $TOOLKIT_PATH/bin/qemu-system-x86_64 -nographic \
-echr 20 \
-cpu host \
-m $MEMORY_SIZE \
-smp $NUM_VCPUS \
-drive file=$IMAGE_DISK,media=disk,if=virtio \
$interfaces
VM crashed with the following trace:
md: ... autorun DONE.
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "sda6" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available partitions:
VFS: Unable to mount root fs on unknown-block(2,0)
User configuration error - no valid root filesystem found
Kernel panic - not syncing: Invalid configuration from end user
prevents continuing
Pid: 1, comm: swapper Not tainted 2.6.34.10-grsec-WR4.3.0.0_cgl #1
Call Trace:
[<ffffffff817015d8>] ? gss_kerberos_ops+0xb9db8/0x1477e0
[<ffffffff817015d8>] ? gss_kerberos_ops+0xb9db8/0x1477e0
[<ffffffff815c1551>] panic+0xf5/0x16a
[<ffffffff8161cde0>] ? vga_con+0x0/0xd0
[<ffffffff818aa25b>] mount_block_root+0x1e3/0x1fa
[<ffffffff818aa33c>] mount_root+0xca/0xf6
[<ffffffff818aa4d8>] prepare_namespace+0x170/0x1a9
[<ffffffff818a9796>] kernel_init+0x21f/0x23b
[<ffffffff81003474>] kernel_thread_helper+0x4/0x10
[<ffffffff815c4d55>] ? restore_args+0x0/0x30
[<ffffffff818a9577>] ? kernel_init+0x0/0x23b
[<ffffffff81003470>] ? kernel_thread_helper+0x0/0x10
Option 2:
I next tried to append "root= as indicated in the above error
sudo $TOOLKIT_PATH/bin/qemu-system-x86_64 -nographic \
-echr 20 \
-cpu host \
-m $MEMORY_SIZE \
-smp $NUM_VCPUS \
-drive file=$IMAGE_DISK,media=disk,if=virtio \
-append "root=/dev/sda1" \
$interfaces
It appears that append option has to be accompanied with a
corresponding "-kernel " option. VM Failed with error :
-append only allowed with -kernel option
Can someone help me in bringing up the VM using virtio the right way ?
Thanks.
S. K
- [Qemu-discuss] Starting qemu with virtio and .raw image file,
Supriya Kher <=