[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [Qemu-devel] [PATCH v2 23/24] numa: add '-numa cpu, ...'
From: |
David Gibson |
Subject: |
Re: [Qemu-ppc] [Qemu-devel] [PATCH v2 23/24] numa: add '-numa cpu, ...' option for property based node mapping |
Date: |
Wed, 10 May 2017 11:15:26 +1000 |
User-agent: |
Mutt/1.8.0 (2017-02-23) |
On Tue, May 09, 2017 at 05:58:29PM +0200, Igor Mammedov wrote:
> On Mon, 8 May 2017 15:40:04 +1000
> David Gibson <address@hidden> wrote:
>
> > On Wed, May 03, 2017 at 02:57:17PM +0200, Igor Mammedov wrote:
> > > legacy cpu to node mapping is using cpu index values to map
> > > VCPU to node with help of '-numa node,nodeid=node,cpus=x[-y]'
> > > option. However cpu index is internal concept and QEMU users
> > > have to guess /reimplement qemu's logic/ to map it to
> > > a concrete cpu socket/core/thread to make sane CPUs
> > > placement across numa nodes.
> > >
> > > This patch allows to map cpu objects to numa nodes using
> > > the same properties as used for cpus with -device/device_add
> > > (socket-id/core-id/thread-id/node-id).
> > >
> > > At present valid properties/values to address CPUs could be
> > > fetched using hotpluggable-cpus monitor/qmp command, it will
> > > require user to start qemu twice when creating domain to fetch
> > > possible CPUs for a machine type/-smp layout first and
> > > then the second time with numa explicit mapping for actual
> > > usage. The first step results could be saved and reused to
> > > set/change mapping later as far as machine type/-smp stays
> > > the same.
> > >
> > > Proposed impl. supports exact and wildcard matching to
> > > simplify CLI and allow to set mapping for a specific cpu
> > > or group of cpu objects specified by matched properties.
> > >
> > > For example:
> > >
> > > # exact mapping x86
> > > -numa cpu,node-id=x,socket-id=y,core-id=z,thread-id=n
> > >
> > > # exact mapping SPAPR
> > > -numa cpu,node-id=x,core-id=y
> > >
> > > # wildcard mapping, all cpu objects that match socket-id=y
> > > # are mapped to node-id=x
> > > -numa cpu,node-id=x,socket-id=y
> > >
> > > Signed-off-by: Igor Mammedov <address@hidden>
> > > ---
> > > v2:
> > > - use new NumaCpuOptions instead of CpuInstanceProperties in
> > > NumaOptions, so that in future we could decouple both
> > > if needed. (Eduardo Habkost <address@hidden>)
> > > - clarify effect of NumaCpuOptions.node-id in qapi-schema.json
> > > ---
> > > numa.c | 25 +++++++++++++++++++++++++
> > > qapi-schema.json | 21 +++++++++++++++++++--
> > > qemu-options.hx | 23 ++++++++++++++++++++++-
> > > 3 files changed, 66 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/numa.c b/numa.c
> > > index 40e9f44..61521f5 100644
> > > --- a/numa.c
> > > +++ b/numa.c
> > > @@ -227,6 +227,7 @@ static int parse_numa(void *opaque, QemuOpts *opts,
> > > Error **errp)
> > > NumaOptions *object = NULL;
> > > MachineState *ms = opaque;
> > > Error *err = NULL;
> > > + CpuInstanceProperties cpu;
> > >
> > > {
> > > Visitor *v = opts_visitor_new(opts);
> > > @@ -246,6 +247,30 @@ static int parse_numa(void *opaque, QemuOpts *opts,
> > > Error **errp)
> > > }
> > > nb_numa_nodes++;
> > > break;
> > > + case NUMA_OPTIONS_TYPE_CPU:
> > > + if (!object->u.cpu.has_node_id) {
> > > + error_setg(&err, "Missing mandatory node-id property");
> > > + goto end;
> > > + }
> > > + if (!numa_info[object->u.cpu.node_id].present) {
> > > + error_setg(&err, "Invalid node-id=%" PRId64 ", NUMA node
> > > must be "
> > > + "defined with -numa node,nodeid=ID before it's used with
> > > "
> > > + "-numa cpu,node-id=ID", object->u.cpu.node_id);
> > > + goto end;
> > > + }
> > > +
> > > + memset(&cpu, 0, sizeof(cpu));
> > > + cpu.has_node_id = object->u.cpu.has_node_id;
> > > + cpu.node_id = object->u.cpu.node_id;
> > > + cpu.has_socket_id = object->u.cpu.has_socket_id;
> > > + cpu.socket_id = object->u.cpu.socket_id;
> > > + cpu.has_core_id = object->u.cpu.has_core_id;
> > > + cpu.core_id = object->u.cpu.core_id;
> > > + cpu.has_thread_id = object->u.cpu.has_thread_id;
> > > + cpu.thread_id = object->u.cpu.thread_id;
> > > +
> > > + machine_set_cpu_numa_node(ms, &cpu, &err);
> >
> > It's possible I've confused myself by not looking at this whole series
> > at once.
> >
> > But, would it be possible to make a single machine hook which maps a
> > constructed cpu property set to a "canonical" cpu property set from
> > the table of CPU slots (or errors, of course). That would let you do
> > what you need here, and I suspect in other places, without multiple
> > hooks.
> Not sure that get question.
>
> if it's about machine_set_cpu_numa_node() than it's a single generic
> setter of MachineState::possible_cpus(node-id) from non machine code
> and the only place it's supposed to be used is from numa configuration
> code. I don't see any need to reuse it for something/somewhere else
> so far.
>
> More over it's not 1:1 mapping wrt input:affected slots,
> it's 1:[1-n] where input could affect multiple slots.
Ah, good point.
> I think I've tried to get machine return a list of cpu slots
> and then deal with them in numa.c but result looked messy and
> not to my liking.
> Eventually I stopped on machine_set_cpu_numa_node() variant
> as the cleanest for now.
Ok, makes sense.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
signature.asc
Description: PGP signature
- Re: [Qemu-ppc] [PATCH v2 21/24] numa: use possible_cpus for not mapped CPUs check, (continued)
- [Qemu-ppc] [PATCH v2 23/24] numa: add '-numa cpu, ...' option for property based node mapping, Igor Mammedov, 2017/05/03
- Re: [Qemu-ppc] [PATCH v2 23/24] numa: add '-numa cpu, ...' option for property based node mapping, Eduardo Habkost, 2017/05/03
- Re: [Qemu-ppc] [PATCH v2 23/24] numa: add '-numa cpu, ...' option for property based node mapping, Eric Blake, 2017/05/03
- Re: [Qemu-ppc] [PATCH v2 23/24] numa: add '-numa cpu, ...' option for property based node mapping, Eduardo Habkost, 2017/05/03
- Re: [Qemu-ppc] [PATCH v2 23/24] numa: add '-numa cpu, ...' option for property based node mapping, Eduardo Habkost, 2017/05/03
- Re: [Qemu-ppc] [PATCH v2 23/24] numa: add '-numa cpu, ...' option for property based node mapping, Igor Mammedov, 2017/05/04
Re: [Qemu-ppc] [PATCH v2 23/24] numa: add '-numa cpu, ...' option for property based node mapping, David Gibson, 2017/05/08
[Qemu-ppc] [PATCH v2 22/24] numa: remove node_cpu bitmaps as they are no longer used, Igor Mammedov, 2017/05/03
[Qemu-ppc] [PATCH v2 24/24] tests: check -numa node, cpu=props_list usecase, Igor Mammedov, 2017/05/03
Re: [Qemu-ppc] [PATCH v2 00/24] numa: add '-numa cpu' option, Eduardo Habkost, 2017/05/04