qemu-ppc
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-ppc] [PATCH v2 3/3] ppc: Add aCube Sam460ex board


From: David Gibson
Subject: Re: [Qemu-ppc] [PATCH v2 3/3] ppc: Add aCube Sam460ex board
Date: Fri, 16 Feb 2018 14:10:14 +1100
User-agent: Mutt/1.9.2 (2017-12-15)

On Thu, Feb 15, 2018 at 10:27:06PM +0100, BALATON Zoltan wrote:
> Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC.
> This is not a complete implementation yet with a lot of components
> still missing but enough for the U-Boot firmware to start and to boot
> a Linux kernel or AROS.
> 
> Signed-off-by: Fran├žois Revol <address@hidden>
> Signed-off-by: BALATON Zoltan <address@hidden>
> ---
> 
> v2:
> - Rebased to latest changes on master
> - Replaced printfs with error_report

This has a conflict in hw/ppc/Makefile.objs.  Looks like it was based
on some other patch that added ppc440_pcix.o.  That's not there
upstream.

> 
>  default-configs/ppc-softmmu.mak    |   2 +
>  default-configs/ppcemb-softmmu.mak |   1 +
>  hw/ppc/Makefile.objs               |   3 +-
>  hw/ppc/sam460ex.c                  | 603 
> +++++++++++++++++++++++++++++++++++++
>  4 files changed, 608 insertions(+), 1 deletion(-)
>  create mode 100644 hw/ppc/sam460ex.c
> 
> diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak
> index 76e29cf..4d7be45 100644
> --- a/default-configs/ppc-softmmu.mak
> +++ b/default-configs/ppc-softmmu.mak
> @@ -21,6 +21,8 @@ CONFIG_E500=y
>  CONFIG_OPENPIC_KVM=$(call land,$(CONFIG_E500),$(CONFIG_KVM))
>  CONFIG_PLATFORM_BUS=y
>  CONFIG_ETSEC=y
> +# For Sam460ex
> +CONFIG_USB_EHCI_SYSBUS=y
>  CONFIG_SM501=y
>  CONFIG_IDE_SII3112=y
>  CONFIG_I2C=y
> diff --git a/default-configs/ppcemb-softmmu.mak 
> b/default-configs/ppcemb-softmmu.mak
> index bc5e1b3..67d18b2 100644
> --- a/default-configs/ppcemb-softmmu.mak
> +++ b/default-configs/ppcemb-softmmu.mak
> @@ -15,6 +15,7 @@ CONFIG_PTIMER=y
>  CONFIG_I8259=y
>  CONFIG_XILINX=y
>  CONFIG_XILINX_ETHLITE=y
> +CONFIG_USB_EHCI_SYSBUS=y
>  CONFIG_SM501=y
>  CONFIG_IDE_SII3112=y
>  CONFIG_I2C=y
> diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
> index bddc742..86d82a6 100644
> --- a/hw/ppc/Makefile.objs
> +++ b/hw/ppc/Makefile.objs
> @@ -13,7 +13,8 @@ endif
>  obj-$(CONFIG_PSERIES) += spapr_rtas_ddw.o
>  # PowerPC 4xx boards
>  obj-y += ppc4xx_devs.o ppc405_uc.o
> -obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o ppc440_bamboo.o 
> ppc440_pcix.o
> +obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o
> +obj-$(CONFIG_PPC4XX) += ppc440_bamboo.o ppc440_pcix.o ppc440_uc.o sam460ex.o
>  # PReP
>  obj-$(CONFIG_PREP) += prep.o
>  obj-$(CONFIG_PREP) += prep_systemio.o
> diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
> new file mode 100644
> index 0000000..ff99cf9
> --- /dev/null
> +++ b/hw/ppc/sam460ex.c
> @@ -0,0 +1,603 @@
> +/*
> + * QEMU aCube Sam460ex board emulation
> + *
> + * Copyright (c) 2012 Fran├žois Revol
> + * Copyright (c) 2016-2018 BALATON Zoltan
> + *
> + * This file is derived from hw/ppc440_bamboo.c,
> + * the copyright for that material belongs to the original owners.
> + *
> + * This work is licensed under the GNU GPL license version 2 or later.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu-common.h"
> +#include "qemu/cutils.h"
> +#include "qemu/error-report.h"
> +#include "qapi/error.h"
> +#include "hw/hw.h"
> +#include "sysemu/blockdev.h"
> +#include "hw/boards.h"
> +#include "sysemu/kvm.h"
> +#include "kvm_ppc.h"
> +#include "sysemu/device_tree.h"
> +#include "sysemu/block-backend.h"
> +#include "hw/loader.h"
> +#include "elf.h"
> +#include "exec/address-spaces.h"
> +#include "exec/memory.h"
> +#include "hw/ppc/ppc440.h"
> +#include "hw/ppc/ppc405.h"
> +#include "hw/block/flash.h"
> +#include "sysemu/sysemu.h"
> +#include "sysemu/qtest.h"
> +#include "hw/sysbus.h"
> +#include "hw/char/serial.h"
> +#include "hw/i2c/ppc4xx_i2c.h"
> +#include "hw/i2c/smbus.h"
> +#include "hw/usb/hcd-ehci.h"
> +
> +#define BINARY_DEVICE_TREE_FILE "sam460ex.dtb"
> +#define UBOOT_FILENAME "u-boot-sam460-20100605.bin"
> +/* to extract the official U-Boot bin from the updater: */
> +/* dd bs=1 skip=$(($(stat -c '%s' updater/updater-460) - 0x80000)) \
> +     if=updater/updater-460 of=u-boot-sam460-20100605.bin */
> +
> +/* from Sam460 U-Boot include/configs/Sam460ex.h */
> +#define FLASH_BASE             0xfff00000
> +#define FLASH_BASE_H           0x4
> +#define FLASH_SIZE             (1 << 20)
> +#define UBOOT_LOAD_BASE        0xfff80000
> +#define UBOOT_SIZE             0x00080000
> +#define UBOOT_ENTRY            0xfffffffc
> +
> +/* from U-Boot */
> +#define EPAPR_MAGIC           (0x45504150)
> +#define KERNEL_ADDR           0x1000000
> +#define FDT_ADDR              0x1800000
> +#define RAMDISK_ADDR          0x1900000
> +
> +/* Sam460ex IRQ MAP:
> +   IRQ0  = ETH_INT
> +   IRQ1  = FPGA_INT
> +   IRQ2  = PCI_INT (PCIA, PCIB, PCIC, PCIB)
> +   IRQ3  = FPGA_INT2
> +   IRQ11 = RTC_INT
> +   IRQ12 = SM502_INT
> +*/
> +
> +#define SDRAM_NR_BANKS 4
> +
> +/* FIXME: See u-boot.git 8ac41e, also fix in ppc440_uc.c */
> +static const unsigned int ppc460ex_sdram_bank_sizes[] = {
> +    1024 << 20, 512 << 20, 256 << 20, 128 << 20, 64 << 20, 32 << 20, 0
> +};
> +
> +struct boot_info {
> +    uint32_t dt_base;
> +    uint32_t dt_size;
> +    uint32_t entry;
> +};
> +
> +/*****************************************************************************/
> +/* SPD eeprom content from mips_malta.c */
> +
> +struct _eeprom24c0x_t {
> +  uint8_t tick;
> +  uint8_t address;
> +  uint8_t command;
> +  uint8_t ack;
> +  uint8_t scl;
> +  uint8_t sda;
> +  uint8_t data;
> +  uint8_t contents[256];
> +};
> +
> +typedef struct _eeprom24c0x_t eeprom24c0x_t;
> +
> +static eeprom24c0x_t spd_eeprom = {
> +    .contents = {
> +        /* 00000000: */ 0x80, 0x08, 0xFF, 0x0D, 0x0A, 0xFF, 0x40, 0x00,
> +        /* 00000008: */ 0x04, 0x75, 0x54, 0x00, 0x82, 0x08, 0x00, 0x01,
> +        /* 00000010: */ 0x8F, 0x04, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00,
> +        /* 00000018: */ 0x00, 0x00, 0x00, 0x14, 0x0F, 0x14, 0x2D, 0xFF,
> +        /* 00000020: */ 0x15, 0x08, 0x15, 0x08, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000028: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000030: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000038: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xD0,
> +        /* 00000040: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000048: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000050: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000058: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000060: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000068: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000070: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000078: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x64, 0xF4,
> +    },
> +};
> +
> +static void generate_eeprom_spd(uint8_t *eeprom, ram_addr_t ram_size)
> +{
> +    enum { SDR = 0x4, DDR1 = 0x7, DDR2 = 0x8 } type;
> +    uint8_t *spd = spd_eeprom.contents;
> +    uint8_t nbanks = 0;
> +    uint16_t density = 0;
> +    int i;
> +
> +    /* work in terms of MB */
> +    ram_size >>= 20;
> +
> +    while ((ram_size >= 4) && (nbanks <= 2)) {
> +        int sz_log2 = MIN(31 - clz32(ram_size), 14);
> +        nbanks++;
> +        density |= 1 << (sz_log2 - 2);
> +        ram_size -= 1 << sz_log2;
> +    }
> +
> +    /* split to 2 banks if possible */
> +    if ((nbanks == 1) && (density > 1)) {
> +        nbanks++;
> +        density >>= 1;
> +    }
> +
> +    if (density & 0xff00) {
> +        density = (density & 0xe0) | ((density >> 8) & 0x1f);
> +        type = DDR2;
> +    } else if (!(density & 0x1f)) {
> +        type = DDR2;
> +    } else {
> +        type = SDR;
> +    }
> +
> +    if (ram_size) {
> +        warn_report("SPD cannot represent final " RAM_ADDR_FMT "MB"
> +                    " of SDRAM", ram_size);
> +    }
> +
> +    /* fill in SPD memory information */
> +    spd[2] = type;
> +    spd[5] = nbanks;
> +    spd[31] = density;
> +
> +    /* XXX: this is totally random */
> +    spd[9] = 0x10; /* CAS tcyc */
> +    spd[18] = 0x20; /* CAS bit */
> +    spd[23] = 0x10; /* CAS tcyc */
> +    spd[25] = 0x10; /* CAS tcyc */
> +
> +    /* checksum */
> +    spd[63] = 0;
> +    for (i = 0; i < 63; i++) {
> +        spd[63] += spd[i];
> +    }
> +
> +    /* copy for SMBUS */
> +    memcpy(eeprom, spd, sizeof(spd_eeprom.contents));
> +}
> +
> +static void generate_eeprom_serial(uint8_t *eeprom)
> +{
> +    int i, pos = 0;
> +    uint8_t mac[6] = { 0x00 };
> +    uint8_t sn[5] = { 0x01, 0x23, 0x45, 0x67, 0x89 };
> +
> +    /* version */
> +    eeprom[pos++] = 0x01;
> +
> +    /* count */
> +    eeprom[pos++] = 0x02;
> +
> +    /* MAC address */
> +    eeprom[pos++] = 0x01; /* MAC */
> +    eeprom[pos++] = 0x06; /* length */
> +    memcpy(&eeprom[pos], mac, sizeof(mac));
> +    pos += sizeof(mac);
> +
> +    /* serial number */
> +    eeprom[pos++] = 0x02; /* serial */
> +    eeprom[pos++] = 0x05; /* length */
> +    memcpy(&eeprom[pos], sn, sizeof(sn));
> +    pos += sizeof(sn);
> +
> +    /* checksum */
> +    eeprom[pos] = 0;
> +    for (i = 0; i < pos; i++) {
> +        eeprom[pos] += eeprom[i];
> +    }
> +}
> +
> +/*****************************************************************************/
> +
> +static int sam460ex_load_uboot(void)
> +{
> +    DriveInfo *dinfo;
> +    BlockBackend *blk = NULL;
> +    hwaddr base = FLASH_BASE | ((hwaddr)FLASH_BASE_H << 32);
> +    long bios_size = FLASH_SIZE;
> +    int fl_sectors;
> +
> +    dinfo = drive_get(IF_PFLASH, 0, 0);
> +    if (dinfo) {
> +        blk = blk_by_legacy_dinfo(dinfo);
> +        bios_size = blk_getlength(blk);
> +    }
> +    fl_sectors = (bios_size + 65535) >> 16;
> +
> +    if (!pflash_cfi01_register(base, NULL, "sam460ex.flash", bios_size,
> +                               blk, (64 * 1024), fl_sectors,
> +                               1, 0x89, 0x18, 0x0000, 0x0, 1)) {
> +        error_report("qemu: Error registering flash memory.");
> +        /* XXX: return an error instead? */
> +        exit(1);
> +    }
> +
> +    if (!blk) {
> +        /*error_report("No flash image given with the 'pflash' parameter,"
> +                " using default u-boot image");*/
> +        base = UBOOT_LOAD_BASE | ((hwaddr)FLASH_BASE_H << 32);
> +        rom_add_file_fixed(UBOOT_FILENAME, base, -1);
> +    }
> +
> +    return 0;
> +}
> +
> +static int sam460ex_load_device_tree(hwaddr addr,
> +                                     uint32_t ramsize,
> +                                     hwaddr initrd_base,
> +                                     hwaddr initrd_size,
> +                                     const char *kernel_cmdline)
> +{
> +    int ret = -1;
> +    uint32_t mem_reg_property[] = { 0, 0, cpu_to_be32(ramsize) };
> +    char *filename;
> +    int fdt_size;
> +    void *fdt;
> +    uint32_t tb_freq = 400000000;
> +    uint32_t clock_freq = 400000000;
> +
> +    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE);
> +    if (!filename) {
> +        goto out;
> +    }
> +    fdt = load_device_tree(filename, &fdt_size);
> +    g_free(filename);
> +    if (fdt == NULL) {
> +        goto out;
> +    }
> +
> +    /* Manipulate device tree in memory. */
> +
> +    ret = qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property,
> +                               sizeof(mem_reg_property));
> +    if (ret < 0) {
> +        error_report("couldn't set /memory/reg");
> +    }
> +
> +    /* default FDT doesn't have a /chosen node... */
> +    qemu_fdt_add_subnode(fdt, "/chosen");
> +
> +    ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start",
> +                                    initrd_base);
> +    if (ret < 0) {
> +        error_report("couldn't set /chosen/linux,initrd-start");
> +    }
> +
> +    ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end",
> +                                    (initrd_base + initrd_size));
> +    if (ret < 0) {
> +        error_report("couldn't set /chosen/linux,initrd-end");
> +    }
> +
> +    ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs",
> +                                      kernel_cmdline);
> +    if (ret < 0) {
> +        error_report("couldn't set /chosen/bootargs");
> +    }
> +
> +    /* Copy data from the host device tree into the guest. Since the guest 
> can
> +     * directly access the timebase without host involvement, we must expose
> +     * the correct frequencies. */
> +    if (kvm_enabled()) {
> +        tb_freq = kvmppc_get_tbfreq();
> +        clock_freq = kvmppc_get_clockfreq();
> +    }
> +
> +    qemu_fdt_setprop_cell(fdt, "/cpus/address@hidden", "clock-frequency",
> +                              clock_freq);
> +    qemu_fdt_setprop_cell(fdt, "/cpus/address@hidden", "timebase-frequency",
> +                              tb_freq);
> +
> +    rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr);
> +    g_free(fdt);
> +    ret = fdt_size;
> +
> +out:
> +
> +    return ret;
> +}
> +
> +/* Create reset TLB entries for BookE, mapping only the flash memory.  */
> +static void mmubooke_create_initial_mapping_uboot(CPUPPCState *env)
> +{
> +    ppcemb_tlb_t *tlb = &env->tlb.tlbe[0];
> +
> +    /* on reset the flash is mapped by a shadow TLB,
> +     * but since we don't implement them we need to use
> +     * the same values U-Boot will use to avoid a fault.
> +     */
> +    tlb->attr = 0;
> +    tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
> +    tlb->size = 0x10000000; /* up to 0xffffffff  */
> +    tlb->EPN = 0xf0000000 & TARGET_PAGE_MASK;
> +    tlb->RPN = (0xf0000000 & TARGET_PAGE_MASK) | 0x4;
> +    tlb->PID = 0;
> +}
> +
> +/* Create reset TLB entries for BookE, spanning the 32bit addr space.  */
> +static void mmubooke_create_initial_mapping(CPUPPCState *env,
> +                                     target_ulong va,
> +                                     hwaddr pa)
> +{
> +    ppcemb_tlb_t *tlb = &env->tlb.tlbe[0];
> +
> +    tlb->attr = 0;
> +    tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
> +    tlb->size = 1 << 31; /* up to 0x80000000  */
> +    tlb->EPN = va & TARGET_PAGE_MASK;
> +    tlb->RPN = pa & TARGET_PAGE_MASK;
> +    tlb->PID = 0;
> +}
> +
> +static void main_cpu_reset(void *opaque)
> +{
> +    PowerPCCPU *cpu = opaque;
> +    CPUPPCState *env = &cpu->env;
> +    struct boot_info *bi = env->load_info;
> +
> +    cpu_reset(CPU(cpu));
> +
> +    /* either we have a kernel to boot or we jump to U-Boot */
> +    if (bi->entry != UBOOT_ENTRY) {
> +        env->gpr[1] = (16 << 20) - 8;
> +        env->gpr[3] = FDT_ADDR;
> +        env->nip = bi->entry;
> +
> +        /* Create a mapping for the kernel.  */
> +        mmubooke_create_initial_mapping(env, 0, 0);
> +        env->gpr[6] = tswap32(EPAPR_MAGIC);
> +        env->gpr[7] = (16 << 20) - 8; /*bi->ima_size;*/
> +
> +    } else {
> +        env->nip = UBOOT_ENTRY;
> +        mmubooke_create_initial_mapping_uboot(env);
> +    }
> +}
> +
> +static void sam460ex_init(MachineState *machine)
> +{
> +    MemoryRegion *address_space_mem = get_system_memory();
> +    MemoryRegion *isa = g_new(MemoryRegion, 1);
> +    MemoryRegion *ram_memories = g_new(MemoryRegion, SDRAM_NR_BANKS);
> +    hwaddr ram_bases[SDRAM_NR_BANKS];
> +    hwaddr ram_sizes[SDRAM_NR_BANKS];
> +    MemoryRegion *l2cache_ram = g_new(MemoryRegion, 1);
> +    qemu_irq *irqs, *uic[4];
> +    PCIBus *pci_bus;
> +    PowerPCCPU *cpu;
> +    CPUPPCState *env;
> +    PPC4xxI2CState *i2c[2];
> +    hwaddr entry = UBOOT_ENTRY;
> +    hwaddr loadaddr = 0;
> +    target_long initrd_size = 0;
> +    DeviceState *dev;
> +    SysBusDevice *sbdev;
> +    int success;
> +    int i;
> +    struct boot_info *boot_info;
> +    const size_t smbus_eeprom_size = 8 * 256;
> +    uint8_t *smbus_eeprom_buf = g_malloc0(smbus_eeprom_size);
> +
> +    cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
> +    env = &cpu->env;
> +    if (env->mmu_model != POWERPC_MMU_BOOKE) {
> +        error_report("Only MMU model BookE is supported by this machine.");
> +        exit(1);
> +    }
> +
> +#ifdef TARGET_PPCEMB
> +    if (!qtest_enabled()) {
> +        warn_report("qemu-system-ppcemb is deprecated, "
> +                    "please use qemu-system-ppc instead.");
> +    }
> +#endif
> +
> +    qemu_register_reset(main_cpu_reset, cpu);
> +    boot_info = g_malloc0(sizeof(*boot_info));
> +    env->load_info = boot_info;
> +
> +    ppc_booke_timers_init(cpu, 50000000, 0);
> +    ppc_dcr_init(env, NULL, NULL);
> +
> +    /* PLB arbitrer */
> +    ppc4xx_plb_init(env);
> +
> +    /* interrupt controllers */
> +    irqs = g_malloc0(sizeof(*irqs) * PPCUIC_OUTPUT_NB);
> +    irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq 
> *)env->irq_inputs)[PPC40x_INPUT_INT];
> +    irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq 
> *)env->irq_inputs)[PPC40x_INPUT_CINT];
> +    uic[0] = ppcuic_init(env, irqs, 0xc0, 0, 1);
> +    uic[1] = ppcuic_init(env, &uic[0][30], 0xd0, 0, 1);
> +    uic[2] = ppcuic_init(env, &uic[0][10], 0xe0, 0, 1);
> +    uic[3] = ppcuic_init(env, &uic[0][16], 0xf0, 0, 1);
> +
> +    /* SDRAM controller */
> +    memset(ram_bases, 0, sizeof(ram_bases));
> +    memset(ram_sizes, 0, sizeof(ram_sizes));
> +    /* put all RAM on first bank because board has one slot
> +     * and firmware only checks that */
> +    machine->ram_size = ppc4xx_sdram_adjust(machine->ram_size, 1,
> +                                   ram_memories, ram_bases, ram_sizes,
> +                                   ppc460ex_sdram_bank_sizes);
> +
> +    /* FIXME: does 460EX have ECC interrupts? */
> +    ppc440_sdram_init(env, SDRAM_NR_BANKS, ram_memories,
> +                      ram_bases, ram_sizes, 1);
> +
> +    /* generate SPD EEPROM data */
> +    for (i = 0; i < SDRAM_NR_BANKS; i++) {
> +        generate_eeprom_spd(&smbus_eeprom_buf[i * 256], ram_sizes[i]);
> +    }
> +    generate_eeprom_serial(&smbus_eeprom_buf[4 * 256]);
> +    generate_eeprom_serial(&smbus_eeprom_buf[6 * 256]);
> +
> +    /* IIC controllers */
> +    dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600700, uic[0][2]);
> +    i2c[0] = PPC4xx_I2C(dev);
> +    object_property_set_bool(OBJECT(dev), true, "realized", NULL);
> +    smbus_eeprom_init(i2c[0]->bus, 8, smbus_eeprom_buf, smbus_eeprom_size);
> +    g_free(smbus_eeprom_buf);
> +
> +    dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600800, uic[0][3]);
> +    i2c[1] = PPC4xx_I2C(dev);
> +
> +    /* External bus controller */
> +    ppc405_ebc_init(env);
> +
> +    /* CPR */
> +    ppc4xx_cpr_init(env);
> +
> +    /* PLB to AHB bridge */
> +    ppc4xx_ahb_init(env);
> +
> +    /* System DCRs */
> +    ppc4xx_sdr_init(env);
> +
> +    /* MAL */
> +    ppc4xx_mal_init(env, 4, 16, &uic[2][3]);
> +
> +    /* 256K of L2 cache as memory */
> +    ppc4xx_l2sram_init(env);
> +    /* FIXME: remove this after fixing l2sram mapping in ppc440_uc.c? */
> +    memory_region_init_ram(l2cache_ram, NULL, "ppc440.l2cache_ram", 256 << 
> 10,
> +                           &error_abort);
> +    memory_region_add_subregion(address_space_mem, 0x400000000LL, 
> l2cache_ram);
> +
> +    /* USB */
> +    sysbus_create_simple(TYPE_PPC4xx_EHCI, 0x4bffd0400, uic[2][29]);
> +    dev = qdev_create(NULL, "sysbus-ohci");
> +    qdev_prop_set_string(dev, "masterbus", "usb-bus.0");
> +    qdev_prop_set_uint32(dev, "num-ports", 6);
> +    qdev_init_nofail(dev);
> +    sbdev = SYS_BUS_DEVICE(dev);
> +    sysbus_mmio_map(sbdev, 0, 0x4bffd0000);
> +    sysbus_connect_irq(sbdev, 0, uic[2][30]);
> +    usb_create_simple(usb_bus_find(-1), "usb-kbd");
> +    usb_create_simple(usb_bus_find(-1), "usb-mouse");
> +
> +    /* PCI bus */
> +    ppc460ex_pcie_init(env);
> +    /* FIXME: is this correct? */
> +    dev = sysbus_create_varargs("ppc440-pcix-host", 0xc0ec00000,
> +                                uic[1][0], uic[1][20], uic[1][21], 
> uic[1][22],
> +                                NULL);
> +    pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
> +    if (!pci_bus) {
> +        error_report("couldn't create PCI controller!");
> +        exit(1);
> +    }
> +    memory_region_init_alias(isa, NULL, "isa_mmio", get_system_io(),
> +                             0, 0x10000);
> +    memory_region_add_subregion(get_system_memory(), 0xc08000000, isa);
> +
> +    /* PCI devices */
> +    pci_create_simple(pci_bus, PCI_DEVFN(6, 0), "sm501");
> +    /* SoC has a single SATA port but we don't emulate that yet
> +     * However, firmware and usual clients have driver for SiI311x
> +     * so add one for convenience by default */
> +    if (defaults_enabled()) {
> +        pci_create_simple(pci_bus, -1, "sii3112");
> +    }
> +
> +    /* SoC has 4 UARTs
> +     * but board has only one wired and two are present in fdt */
> +    if (serial_hds[0] != NULL) {
> +        serial_mm_init(address_space_mem, 0x4ef600300, 0, uic[1][1],
> +                       PPC_SERIAL_MM_BAUDBASE, serial_hds[0],
> +                       DEVICE_BIG_ENDIAN);
> +    }
> +    if (serial_hds[1] != NULL) {
> +        serial_mm_init(address_space_mem, 0x4ef600400, 0, uic[0][1],
> +                       PPC_SERIAL_MM_BAUDBASE, serial_hds[1],
> +                       DEVICE_BIG_ENDIAN);
> +    }
> +
> +    /* Load U-Boot image. */
> +    if (!machine->kernel_filename) {
> +        success = sam460ex_load_uboot();
> +        if (success < 0) {
> +            error_report("qemu: could not load firmware");
> +            exit(1);
> +        }
> +    }
> +
> +    /* Load kernel. */
> +    if (machine->kernel_filename) {
> +        success = load_uimage(machine->kernel_filename, &entry, &loadaddr,
> +                              NULL, NULL, NULL);
> +        if (success < 0) {
> +            uint64_t elf_entry, elf_lowaddr;
> +
> +            success = load_elf(machine->kernel_filename, NULL, NULL, 
> &elf_entry,
> +                               &elf_lowaddr, NULL, 1, PPC_ELF_MACHINE, 0, 0);
> +            entry = elf_entry;
> +            loadaddr = elf_lowaddr;
> +        }
> +        /* XXX try again as binary */
> +        if (success < 0) {
> +            error_report("qemu: could not load kernel '%s'",
> +                    machine->kernel_filename);
> +            exit(1);
> +        }
> +    }
> +
> +    /* Load initrd. */
> +    if (machine->initrd_filename) {
> +        initrd_size = load_image_targphys(machine->initrd_filename,
> +                                          RAMDISK_ADDR,
> +                                          machine->ram_size - RAMDISK_ADDR);
> +        if (initrd_size < 0) {
> +            error_report("qemu: could not load ram disk '%s' at %x",
> +                    machine->initrd_filename, RAMDISK_ADDR);
> +            exit(1);
> +        }
> +    }
> +
> +    /* If we're loading a kernel directly, we must load the device tree too. 
> */
> +    if (machine->kernel_filename) {
> +        int dt_size;
> +
> +        dt_size = sam460ex_load_device_tree(FDT_ADDR, machine->ram_size,
> +                                    RAMDISK_ADDR, initrd_size,
> +                                    machine->kernel_cmdline);
> +        if (dt_size < 0) {
> +            error_report("couldn't load device tree");
> +            exit(1);
> +        }
> +
> +        boot_info->dt_base = FDT_ADDR;
> +        boot_info->dt_size = dt_size;
> +    }
> +
> +    boot_info->entry = entry;
> +}
> +
> +static void sam460ex_machine_init(MachineClass *mc)
> +{
> +    mc->desc = "aCube Sam460ex";
> +    mc->init = sam460ex_init;
> +    mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("460exb");
> +    mc->default_ram_size = 512 * M_BYTE;
> +}
> +
> +DEFINE_MACHINE("sam460ex", sam460ex_machine_init)

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

Attachment: signature.asc
Description: PGP signature


reply via email to

[Prev in Thread] Current Thread [Next in Thread]