qemu-ppc
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-ppc] [PATCH v3] ppc: Add aCube Sam460ex board


From: BALATON Zoltan
Subject: [Qemu-ppc] [PATCH v3] ppc: Add aCube Sam460ex board
Date: Sun, 18 Feb 2018 00:32:26 +0100

Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC.
This is not a complete implementation yet with a lot of components
still missing but enough for the U-Boot firmware to start and to boot
a Linux kernel or AROS.

Signed-off-by: François Revol <address@hidden>
Signed-off-by: BALATON Zoltan <address@hidden>
---
v3:
- Added device tree source and blob
- Fixed clock frequency in device tree
    
v2:
- Rebased to latest changes on master
- Replaced printfs with error_report

 Makefile                           |   2 +-
 default-configs/ppc-softmmu.mak    |   2 +
 default-configs/ppcemb-softmmu.mak |   1 +
 hw/ppc/Makefile.objs               |   3 +-
 hw/ppc/sam460ex.c                  | 603 +++++++++++++++++++++++++++++++++++++
 pc-bios/canyonlands.dtb            | Bin 0 -> 9779 bytes
 pc-bios/canyonlands.dts            | 566 ++++++++++++++++++++++++++++++++++
 7 files changed, 1175 insertions(+), 2 deletions(-)
 create mode 100644 hw/ppc/sam460ex.c
 create mode 100644 pc-bios/canyonlands.dtb
 create mode 100644 pc-bios/canyonlands.dts

diff --git a/Makefile b/Makefile
index 90e05ac..6434d6c 100644
--- a/Makefile
+++ b/Makefile
@@ -656,7 +656,7 @@ efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
 efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
 efi-e1000e.rom efi-vmxnet3.rom \
 qemu-icon.bmp qemu_logo_no_text.svg \
-bamboo.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
+bamboo.dtb canyonlands.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
 multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin \
 s390-ccw.img s390-netboot.img \
 spapr-rtas.bin slof.bin skiboot.lid \
diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak
index 76e29cf..4d7be45 100644
--- a/default-configs/ppc-softmmu.mak
+++ b/default-configs/ppc-softmmu.mak
@@ -21,6 +21,8 @@ CONFIG_E500=y
 CONFIG_OPENPIC_KVM=$(call land,$(CONFIG_E500),$(CONFIG_KVM))
 CONFIG_PLATFORM_BUS=y
 CONFIG_ETSEC=y
+# For Sam460ex
+CONFIG_USB_EHCI_SYSBUS=y
 CONFIG_SM501=y
 CONFIG_IDE_SII3112=y
 CONFIG_I2C=y
diff --git a/default-configs/ppcemb-softmmu.mak 
b/default-configs/ppcemb-softmmu.mak
index bc5e1b3..67d18b2 100644
--- a/default-configs/ppcemb-softmmu.mak
+++ b/default-configs/ppcemb-softmmu.mak
@@ -15,6 +15,7 @@ CONFIG_PTIMER=y
 CONFIG_I8259=y
 CONFIG_XILINX=y
 CONFIG_XILINX_ETHLITE=y
+CONFIG_USB_EHCI_SYSBUS=y
 CONFIG_SM501=y
 CONFIG_IDE_SII3112=y
 CONFIG_I2C=y
diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
index bddc742..86d82a6 100644
--- a/hw/ppc/Makefile.objs
+++ b/hw/ppc/Makefile.objs
@@ -13,7 +13,8 @@ endif
 obj-$(CONFIG_PSERIES) += spapr_rtas_ddw.o
 # PowerPC 4xx boards
 obj-y += ppc4xx_devs.o ppc405_uc.o
-obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o ppc440_bamboo.o 
ppc440_pcix.o
+obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o
+obj-$(CONFIG_PPC4XX) += ppc440_bamboo.o ppc440_pcix.o ppc440_uc.o sam460ex.o
 # PReP
 obj-$(CONFIG_PREP) += prep.o
 obj-$(CONFIG_PREP) += prep_systemio.o
diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
new file mode 100644
index 0000000..70b8e76
--- /dev/null
+++ b/hw/ppc/sam460ex.c
@@ -0,0 +1,603 @@
+/*
+ * QEMU aCube Sam460ex board emulation
+ *
+ * Copyright (c) 2012 François Revol
+ * Copyright (c) 2016-2018 BALATON Zoltan
+ *
+ * This file is derived from hw/ppc440_bamboo.c,
+ * the copyright for that material belongs to the original owners.
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "qemu/cutils.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+#include "hw/hw.h"
+#include "sysemu/blockdev.h"
+#include "hw/boards.h"
+#include "sysemu/kvm.h"
+#include "kvm_ppc.h"
+#include "sysemu/device_tree.h"
+#include "sysemu/block-backend.h"
+#include "hw/loader.h"
+#include "elf.h"
+#include "exec/address-spaces.h"
+#include "exec/memory.h"
+#include "hw/ppc/ppc440.h"
+#include "hw/ppc/ppc405.h"
+#include "hw/block/flash.h"
+#include "sysemu/sysemu.h"
+#include "sysemu/qtest.h"
+#include "hw/sysbus.h"
+#include "hw/char/serial.h"
+#include "hw/i2c/ppc4xx_i2c.h"
+#include "hw/i2c/smbus.h"
+#include "hw/usb/hcd-ehci.h"
+
+#define BINARY_DEVICE_TREE_FILE "canyonlands.dtb"
+#define UBOOT_FILENAME "u-boot-sam460-20100605.bin"
+/* to extract the official U-Boot bin from the updater: */
+/* dd bs=1 skip=$(($(stat -c '%s' updater/updater-460) - 0x80000)) \
+     if=updater/updater-460 of=u-boot-sam460-20100605.bin */
+
+/* from Sam460 U-Boot include/configs/Sam460ex.h */
+#define FLASH_BASE             0xfff00000
+#define FLASH_BASE_H           0x4
+#define FLASH_SIZE             (1 << 20)
+#define UBOOT_LOAD_BASE        0xfff80000
+#define UBOOT_SIZE             0x00080000
+#define UBOOT_ENTRY            0xfffffffc
+
+/* from U-Boot */
+#define EPAPR_MAGIC           (0x45504150)
+#define KERNEL_ADDR           0x1000000
+#define FDT_ADDR              0x1800000
+#define RAMDISK_ADDR          0x1900000
+
+/* Sam460ex IRQ MAP:
+   IRQ0  = ETH_INT
+   IRQ1  = FPGA_INT
+   IRQ2  = PCI_INT (PCIA, PCIB, PCIC, PCIB)
+   IRQ3  = FPGA_INT2
+   IRQ11 = RTC_INT
+   IRQ12 = SM502_INT
+*/
+
+#define SDRAM_NR_BANKS 4
+
+/* FIXME: See u-boot.git 8ac41e, also fix in ppc440_uc.c */
+static const unsigned int ppc460ex_sdram_bank_sizes[] = {
+    1024 << 20, 512 << 20, 256 << 20, 128 << 20, 64 << 20, 32 << 20, 0
+};
+
+struct boot_info {
+    uint32_t dt_base;
+    uint32_t dt_size;
+    uint32_t entry;
+};
+
+/*****************************************************************************/
+/* SPD eeprom content from mips_malta.c */
+
+struct _eeprom24c0x_t {
+  uint8_t tick;
+  uint8_t address;
+  uint8_t command;
+  uint8_t ack;
+  uint8_t scl;
+  uint8_t sda;
+  uint8_t data;
+  uint8_t contents[256];
+};
+
+typedef struct _eeprom24c0x_t eeprom24c0x_t;
+
+static eeprom24c0x_t spd_eeprom = {
+    .contents = {
+        /* 00000000: */ 0x80, 0x08, 0xFF, 0x0D, 0x0A, 0xFF, 0x40, 0x00,
+        /* 00000008: */ 0x04, 0x75, 0x54, 0x00, 0x82, 0x08, 0x00, 0x01,
+        /* 00000010: */ 0x8F, 0x04, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00,
+        /* 00000018: */ 0x00, 0x00, 0x00, 0x14, 0x0F, 0x14, 0x2D, 0xFF,
+        /* 00000020: */ 0x15, 0x08, 0x15, 0x08, 0x00, 0x00, 0x00, 0x00,
+        /* 00000028: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000030: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000038: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xD0,
+        /* 00000040: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000048: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000050: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000058: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000060: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000068: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000070: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000078: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x64, 0xF4,
+    },
+};
+
+static void generate_eeprom_spd(uint8_t *eeprom, ram_addr_t ram_size)
+{
+    enum { SDR = 0x4, DDR1 = 0x7, DDR2 = 0x8 } type;
+    uint8_t *spd = spd_eeprom.contents;
+    uint8_t nbanks = 0;
+    uint16_t density = 0;
+    int i;
+
+    /* work in terms of MB */
+    ram_size >>= 20;
+
+    while ((ram_size >= 4) && (nbanks <= 2)) {
+        int sz_log2 = MIN(31 - clz32(ram_size), 14);
+        nbanks++;
+        density |= 1 << (sz_log2 - 2);
+        ram_size -= 1 << sz_log2;
+    }
+
+    /* split to 2 banks if possible */
+    if ((nbanks == 1) && (density > 1)) {
+        nbanks++;
+        density >>= 1;
+    }
+
+    if (density & 0xff00) {
+        density = (density & 0xe0) | ((density >> 8) & 0x1f);
+        type = DDR2;
+    } else if (!(density & 0x1f)) {
+        type = DDR2;
+    } else {
+        type = SDR;
+    }
+
+    if (ram_size) {
+        warn_report("SPD cannot represent final " RAM_ADDR_FMT "MB"
+                    " of SDRAM", ram_size);
+    }
+
+    /* fill in SPD memory information */
+    spd[2] = type;
+    spd[5] = nbanks;
+    spd[31] = density;
+
+    /* XXX: this is totally random */
+    spd[9] = 0x10; /* CAS tcyc */
+    spd[18] = 0x20; /* CAS bit */
+    spd[23] = 0x10; /* CAS tcyc */
+    spd[25] = 0x10; /* CAS tcyc */
+
+    /* checksum */
+    spd[63] = 0;
+    for (i = 0; i < 63; i++) {
+        spd[63] += spd[i];
+    }
+
+    /* copy for SMBUS */
+    memcpy(eeprom, spd, sizeof(spd_eeprom.contents));
+}
+
+static void generate_eeprom_serial(uint8_t *eeprom)
+{
+    int i, pos = 0;
+    uint8_t mac[6] = { 0x00 };
+    uint8_t sn[5] = { 0x01, 0x23, 0x45, 0x67, 0x89 };
+
+    /* version */
+    eeprom[pos++] = 0x01;
+
+    /* count */
+    eeprom[pos++] = 0x02;
+
+    /* MAC address */
+    eeprom[pos++] = 0x01; /* MAC */
+    eeprom[pos++] = 0x06; /* length */
+    memcpy(&eeprom[pos], mac, sizeof(mac));
+    pos += sizeof(mac);
+
+    /* serial number */
+    eeprom[pos++] = 0x02; /* serial */
+    eeprom[pos++] = 0x05; /* length */
+    memcpy(&eeprom[pos], sn, sizeof(sn));
+    pos += sizeof(sn);
+
+    /* checksum */
+    eeprom[pos] = 0;
+    for (i = 0; i < pos; i++) {
+        eeprom[pos] += eeprom[i];
+    }
+}
+
+/*****************************************************************************/
+
+static int sam460ex_load_uboot(void)
+{
+    DriveInfo *dinfo;
+    BlockBackend *blk = NULL;
+    hwaddr base = FLASH_BASE | ((hwaddr)FLASH_BASE_H << 32);
+    long bios_size = FLASH_SIZE;
+    int fl_sectors;
+
+    dinfo = drive_get(IF_PFLASH, 0, 0);
+    if (dinfo) {
+        blk = blk_by_legacy_dinfo(dinfo);
+        bios_size = blk_getlength(blk);
+    }
+    fl_sectors = (bios_size + 65535) >> 16;
+
+    if (!pflash_cfi01_register(base, NULL, "sam460ex.flash", bios_size,
+                               blk, (64 * 1024), fl_sectors,
+                               1, 0x89, 0x18, 0x0000, 0x0, 1)) {
+        error_report("qemu: Error registering flash memory.");
+        /* XXX: return an error instead? */
+        exit(1);
+    }
+
+    if (!blk) {
+        /*error_report("No flash image given with the 'pflash' parameter,"
+                " using default u-boot image");*/
+        base = UBOOT_LOAD_BASE | ((hwaddr)FLASH_BASE_H << 32);
+        rom_add_file_fixed(UBOOT_FILENAME, base, -1);
+    }
+
+    return 0;
+}
+
+static int sam460ex_load_device_tree(hwaddr addr,
+                                     uint32_t ramsize,
+                                     hwaddr initrd_base,
+                                     hwaddr initrd_size,
+                                     const char *kernel_cmdline)
+{
+    int ret = -1;
+    uint32_t mem_reg_property[] = { 0, 0, cpu_to_be32(ramsize) };
+    char *filename;
+    int fdt_size;
+    void *fdt;
+    uint32_t tb_freq = 50000000;
+    uint32_t clock_freq = 50000000;
+
+    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE);
+    if (!filename) {
+        goto out;
+    }
+    fdt = load_device_tree(filename, &fdt_size);
+    g_free(filename);
+    if (fdt == NULL) {
+        goto out;
+    }
+
+    /* Manipulate device tree in memory. */
+
+    ret = qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property,
+                               sizeof(mem_reg_property));
+    if (ret < 0) {
+        error_report("couldn't set /memory/reg");
+    }
+
+    /* default FDT doesn't have a /chosen node... */
+    qemu_fdt_add_subnode(fdt, "/chosen");
+
+    ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start",
+                                    initrd_base);
+    if (ret < 0) {
+        error_report("couldn't set /chosen/linux,initrd-start");
+    }
+
+    ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end",
+                                    (initrd_base + initrd_size));
+    if (ret < 0) {
+        error_report("couldn't set /chosen/linux,initrd-end");
+    }
+
+    ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs",
+                                      kernel_cmdline);
+    if (ret < 0) {
+        error_report("couldn't set /chosen/bootargs");
+    }
+
+    /* Copy data from the host device tree into the guest. Since the guest can
+     * directly access the timebase without host involvement, we must expose
+     * the correct frequencies. */
+    if (kvm_enabled()) {
+        tb_freq = kvmppc_get_tbfreq();
+        clock_freq = kvmppc_get_clockfreq();
+    }
+
+    qemu_fdt_setprop_cell(fdt, "/cpus/address@hidden", "clock-frequency",
+                              clock_freq);
+    qemu_fdt_setprop_cell(fdt, "/cpus/address@hidden", "timebase-frequency",
+                              tb_freq);
+
+    rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr);
+    g_free(fdt);
+    ret = fdt_size;
+
+out:
+
+    return ret;
+}
+
+/* Create reset TLB entries for BookE, mapping only the flash memory.  */
+static void mmubooke_create_initial_mapping_uboot(CPUPPCState *env)
+{
+    ppcemb_tlb_t *tlb = &env->tlb.tlbe[0];
+
+    /* on reset the flash is mapped by a shadow TLB,
+     * but since we don't implement them we need to use
+     * the same values U-Boot will use to avoid a fault.
+     */
+    tlb->attr = 0;
+    tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
+    tlb->size = 0x10000000; /* up to 0xffffffff  */
+    tlb->EPN = 0xf0000000 & TARGET_PAGE_MASK;
+    tlb->RPN = (0xf0000000 & TARGET_PAGE_MASK) | 0x4;
+    tlb->PID = 0;
+}
+
+/* Create reset TLB entries for BookE, spanning the 32bit addr space.  */
+static void mmubooke_create_initial_mapping(CPUPPCState *env,
+                                     target_ulong va,
+                                     hwaddr pa)
+{
+    ppcemb_tlb_t *tlb = &env->tlb.tlbe[0];
+
+    tlb->attr = 0;
+    tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
+    tlb->size = 1 << 31; /* up to 0x80000000  */
+    tlb->EPN = va & TARGET_PAGE_MASK;
+    tlb->RPN = pa & TARGET_PAGE_MASK;
+    tlb->PID = 0;
+}
+
+static void main_cpu_reset(void *opaque)
+{
+    PowerPCCPU *cpu = opaque;
+    CPUPPCState *env = &cpu->env;
+    struct boot_info *bi = env->load_info;
+
+    cpu_reset(CPU(cpu));
+
+    /* either we have a kernel to boot or we jump to U-Boot */
+    if (bi->entry != UBOOT_ENTRY) {
+        env->gpr[1] = (16 << 20) - 8;
+        env->gpr[3] = FDT_ADDR;
+        env->nip = bi->entry;
+
+        /* Create a mapping for the kernel.  */
+        mmubooke_create_initial_mapping(env, 0, 0);
+        env->gpr[6] = tswap32(EPAPR_MAGIC);
+        env->gpr[7] = (16 << 20) - 8; /*bi->ima_size;*/
+
+    } else {
+        env->nip = UBOOT_ENTRY;
+        mmubooke_create_initial_mapping_uboot(env);
+    }
+}
+
+static void sam460ex_init(MachineState *machine)
+{
+    MemoryRegion *address_space_mem = get_system_memory();
+    MemoryRegion *isa = g_new(MemoryRegion, 1);
+    MemoryRegion *ram_memories = g_new(MemoryRegion, SDRAM_NR_BANKS);
+    hwaddr ram_bases[SDRAM_NR_BANKS];
+    hwaddr ram_sizes[SDRAM_NR_BANKS];
+    MemoryRegion *l2cache_ram = g_new(MemoryRegion, 1);
+    qemu_irq *irqs, *uic[4];
+    PCIBus *pci_bus;
+    PowerPCCPU *cpu;
+    CPUPPCState *env;
+    PPC4xxI2CState *i2c[2];
+    hwaddr entry = UBOOT_ENTRY;
+    hwaddr loadaddr = 0;
+    target_long initrd_size = 0;
+    DeviceState *dev;
+    SysBusDevice *sbdev;
+    int success;
+    int i;
+    struct boot_info *boot_info;
+    const size_t smbus_eeprom_size = 8 * 256;
+    uint8_t *smbus_eeprom_buf = g_malloc0(smbus_eeprom_size);
+
+    cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
+    env = &cpu->env;
+    if (env->mmu_model != POWERPC_MMU_BOOKE) {
+        error_report("Only MMU model BookE is supported by this machine.");
+        exit(1);
+    }
+
+#ifdef TARGET_PPCEMB
+    if (!qtest_enabled()) {
+        warn_report("qemu-system-ppcemb is deprecated, "
+                    "please use qemu-system-ppc instead.");
+    }
+#endif
+
+    qemu_register_reset(main_cpu_reset, cpu);
+    boot_info = g_malloc0(sizeof(*boot_info));
+    env->load_info = boot_info;
+
+    ppc_booke_timers_init(cpu, 50000000, 0);
+    ppc_dcr_init(env, NULL, NULL);
+
+    /* PLB arbitrer */
+    ppc4xx_plb_init(env);
+
+    /* interrupt controllers */
+    irqs = g_malloc0(sizeof(*irqs) * PPCUIC_OUTPUT_NB);
+    irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT];
+    irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq 
*)env->irq_inputs)[PPC40x_INPUT_CINT];
+    uic[0] = ppcuic_init(env, irqs, 0xc0, 0, 1);
+    uic[1] = ppcuic_init(env, &uic[0][30], 0xd0, 0, 1);
+    uic[2] = ppcuic_init(env, &uic[0][10], 0xe0, 0, 1);
+    uic[3] = ppcuic_init(env, &uic[0][16], 0xf0, 0, 1);
+
+    /* SDRAM controller */
+    memset(ram_bases, 0, sizeof(ram_bases));
+    memset(ram_sizes, 0, sizeof(ram_sizes));
+    /* put all RAM on first bank because board has one slot
+     * and firmware only checks that */
+    machine->ram_size = ppc4xx_sdram_adjust(machine->ram_size, 1,
+                                   ram_memories, ram_bases, ram_sizes,
+                                   ppc460ex_sdram_bank_sizes);
+
+    /* FIXME: does 460EX have ECC interrupts? */
+    ppc440_sdram_init(env, SDRAM_NR_BANKS, ram_memories,
+                      ram_bases, ram_sizes, 1);
+
+    /* generate SPD EEPROM data */
+    for (i = 0; i < SDRAM_NR_BANKS; i++) {
+        generate_eeprom_spd(&smbus_eeprom_buf[i * 256], ram_sizes[i]);
+    }
+    generate_eeprom_serial(&smbus_eeprom_buf[4 * 256]);
+    generate_eeprom_serial(&smbus_eeprom_buf[6 * 256]);
+
+    /* IIC controllers */
+    dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600700, uic[0][2]);
+    i2c[0] = PPC4xx_I2C(dev);
+    object_property_set_bool(OBJECT(dev), true, "realized", NULL);
+    smbus_eeprom_init(i2c[0]->bus, 8, smbus_eeprom_buf, smbus_eeprom_size);
+    g_free(smbus_eeprom_buf);
+
+    dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600800, uic[0][3]);
+    i2c[1] = PPC4xx_I2C(dev);
+
+    /* External bus controller */
+    ppc405_ebc_init(env);
+
+    /* CPR */
+    ppc4xx_cpr_init(env);
+
+    /* PLB to AHB bridge */
+    ppc4xx_ahb_init(env);
+
+    /* System DCRs */
+    ppc4xx_sdr_init(env);
+
+    /* MAL */
+    ppc4xx_mal_init(env, 4, 16, &uic[2][3]);
+
+    /* 256K of L2 cache as memory */
+    ppc4xx_l2sram_init(env);
+    /* FIXME: remove this after fixing l2sram mapping in ppc440_uc.c? */
+    memory_region_init_ram(l2cache_ram, NULL, "ppc440.l2cache_ram", 256 << 10,
+                           &error_abort);
+    memory_region_add_subregion(address_space_mem, 0x400000000LL, l2cache_ram);
+
+    /* USB */
+    sysbus_create_simple(TYPE_PPC4xx_EHCI, 0x4bffd0400, uic[2][29]);
+    dev = qdev_create(NULL, "sysbus-ohci");
+    qdev_prop_set_string(dev, "masterbus", "usb-bus.0");
+    qdev_prop_set_uint32(dev, "num-ports", 6);
+    qdev_init_nofail(dev);
+    sbdev = SYS_BUS_DEVICE(dev);
+    sysbus_mmio_map(sbdev, 0, 0x4bffd0000);
+    sysbus_connect_irq(sbdev, 0, uic[2][30]);
+    usb_create_simple(usb_bus_find(-1), "usb-kbd");
+    usb_create_simple(usb_bus_find(-1), "usb-mouse");
+
+    /* PCI bus */
+    ppc460ex_pcie_init(env);
+    /* FIXME: is this correct? */
+    dev = sysbus_create_varargs("ppc440-pcix-host", 0xc0ec00000,
+                                uic[1][0], uic[1][20], uic[1][21], uic[1][22],
+                                NULL);
+    pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
+    if (!pci_bus) {
+        error_report("couldn't create PCI controller!");
+        exit(1);
+    }
+    memory_region_init_alias(isa, NULL, "isa_mmio", get_system_io(),
+                             0, 0x10000);
+    memory_region_add_subregion(get_system_memory(), 0xc08000000, isa);
+
+    /* PCI devices */
+    pci_create_simple(pci_bus, PCI_DEVFN(6, 0), "sm501");
+    /* SoC has a single SATA port but we don't emulate that yet
+     * However, firmware and usual clients have driver for SiI311x
+     * so add one for convenience by default */
+    if (defaults_enabled()) {
+        pci_create_simple(pci_bus, -1, "sii3112");
+    }
+
+    /* SoC has 4 UARTs
+     * but board has only one wired and two are present in fdt */
+    if (serial_hds[0] != NULL) {
+        serial_mm_init(address_space_mem, 0x4ef600300, 0, uic[1][1],
+                       PPC_SERIAL_MM_BAUDBASE, serial_hds[0],
+                       DEVICE_BIG_ENDIAN);
+    }
+    if (serial_hds[1] != NULL) {
+        serial_mm_init(address_space_mem, 0x4ef600400, 0, uic[0][1],
+                       PPC_SERIAL_MM_BAUDBASE, serial_hds[1],
+                       DEVICE_BIG_ENDIAN);
+    }
+
+    /* Load U-Boot image. */
+    if (!machine->kernel_filename) {
+        success = sam460ex_load_uboot();
+        if (success < 0) {
+            error_report("qemu: could not load firmware");
+            exit(1);
+        }
+    }
+
+    /* Load kernel. */
+    if (machine->kernel_filename) {
+        success = load_uimage(machine->kernel_filename, &entry, &loadaddr,
+                              NULL, NULL, NULL);
+        if (success < 0) {
+            uint64_t elf_entry, elf_lowaddr;
+
+            success = load_elf(machine->kernel_filename, NULL, NULL, 
&elf_entry,
+                               &elf_lowaddr, NULL, 1, PPC_ELF_MACHINE, 0, 0);
+            entry = elf_entry;
+            loadaddr = elf_lowaddr;
+        }
+        /* XXX try again as binary */
+        if (success < 0) {
+            error_report("qemu: could not load kernel '%s'",
+                    machine->kernel_filename);
+            exit(1);
+        }
+    }
+
+    /* Load initrd. */
+    if (machine->initrd_filename) {
+        initrd_size = load_image_targphys(machine->initrd_filename,
+                                          RAMDISK_ADDR,
+                                          machine->ram_size - RAMDISK_ADDR);
+        if (initrd_size < 0) {
+            error_report("qemu: could not load ram disk '%s' at %x",
+                    machine->initrd_filename, RAMDISK_ADDR);
+            exit(1);
+        }
+    }
+
+    /* If we're loading a kernel directly, we must load the device tree too. */
+    if (machine->kernel_filename) {
+        int dt_size;
+
+        dt_size = sam460ex_load_device_tree(FDT_ADDR, machine->ram_size,
+                                    RAMDISK_ADDR, initrd_size,
+                                    machine->kernel_cmdline);
+        if (dt_size < 0) {
+            error_report("couldn't load device tree");
+            exit(1);
+        }
+
+        boot_info->dt_base = FDT_ADDR;
+        boot_info->dt_size = dt_size;
+    }
+
+    boot_info->entry = entry;
+}
+
+static void sam460ex_machine_init(MachineClass *mc)
+{
+    mc->desc = "aCube Sam460ex";
+    mc->init = sam460ex_init;
+    mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("460exb");
+    mc->default_ram_size = 512 * M_BYTE;
+}
+
+DEFINE_MACHINE("sam460ex", sam460ex_machine_init)
diff --git a/pc-bios/canyonlands.dtb b/pc-bios/canyonlands.dtb
new file mode 100644
index 
0000000000000000000000000000000000000000..9dce3443ad9578a8a4bb92ba6970cb2ae54d1ec3
GIT binary patch
literal 9779
zcmc&)%a0sK8L!?oi9<HFNy5`Sc5TU6VjIuwt{+H93?z{daIgeINIuv--MzDoXS$p2
zo_!c0mVbcch{VMQE*y{$$^~(7BqGECt*nRx5|address@hidden
zR8#fU_o(kxRo&Hd|G9_%Fy_L#G3J^v=YE0qBI-v_&!D0#zKZdo?N9v%4q8Ne!u1!>
zDtsD!(h#P+v(YGySK}z(address@hidden<HaJms&address@hidden;yL{YypJ
zzmzsxX_co<FWtP->7<<wuyzj8ef0>address@hidden;S^SEp4L4Xw0wM`h)a?%Q+eHd;FR
zBZ$kfZ>#!BeM6YOVj*qMs@(eV2F8e^t*21WUN3gi>iSEo8&^87e2*B5qnv?26ZrNF
z{KFaer+}AHDVzLvQI}B_{*5vF09*K;2Xp*S4)-+LzvfYsZKoV=>5*H;&xwbCX*b8j
zH=}e^RC|address@hidden;mz_Ut*UX^gmIBKRWTf<mFK&Ufo>)1k5<Q79Ku)W
zu5plv5FODAp2Cl_H(-vi5Izaq1+;IVK7*=0L05{x8atKoMPO%bChka`yAyejtFz{k
z>U<v}A6Mryu=^|E|12tV;&address@hidden@}ieIJGl
z>iw*1A7$T%Ky##h+&od9#6I$}s(tUG|D^UIj$$A8UfTI6`?&7JzB;MU6<Y2!vVJh;
z)(=rrdXk2G!W)-|c`<erFW0rlI|8V(?Ywc>j?LR&oUejgj!*5oVYisp-YrhzXyAvS
zdicM+&address@hidden&BGAGC
z*O119c5uBh4|N?A$92{E2ge&address@hidden;address@hidden@~aO1d5q!Uj)&88B0#Jo
address@hidden(+(294%GH1cK>x^Sa&address@hidden)j)n3^Yz3#OR3Mnn^MYQ(3FUwf==Fn0a
zc?jU(?ye3w9z6$6m``BjBweJoi9cy4tNN2MCXvK>Yp2Qwy>54+hR~8`Mi0;#H$S_!
zQ0`=Yt|()!ql)address@hidden<u1h|gr)^O?YQGgLj1L%}}i8C;G*-{2=`y|@KDqv=zJ
zN6!|8XU`wz7WXUS;b+OMr_iS_xQ^H=FZ-;d_s5xg+#kihbSut!{msp!(>~ac|I?^q
z=eX{Nq;aMy2(->address@hidden;-<3m}DD1Ck6-UF&3>xcc<&@WL%4+yquw5cTWA<wK7oPU_2
zD`Rb}?mgg;xrOR%o~w(VbvjSc3^-Mrwd8#c)address@hidden
zeBiHh(y};w`z+|>O8kf?kLE=O;LkaTLccN=bR22eehQU-QF`h(8(-=q_9mmq`W5D4
zjD>T*fVxuWWxWc5urAZ6>aK5C3a6XKj8jS6oDJe*<{Dv*_e_ojzjS!VBm14|9Mn-`
zmEwv8p`$&6*2aJYF5w(*5`zaMqbT+1Tz!aFpMW8F9k4K=wGp)ZIERDZ%5?ApnNY-U
zc->&1`nS(D81q)VqiFRY`Bd!vJ()V(`L&Rk6Kt>BzWS%#qtkv&%+$OX^X7FFmWKYv
zK4YFo)qId(&A`4c#Or*Vhcb9Z=|19g62Fo*$cyUc<}j+adY#n{22e=Db&Yr>tM%HK
z2E)tUwcNy;address@hidden@o;Wx1FF3f(m%*Wk;uzy=
z*DY7Pi{pg1i}yuMw>EbUlBSKb<tHz-J;c98c4xlu({BejQIo6|cTRLz2Bt?5HkUjd
address@hidden>o6Aw7H^9DILsv$jWv$~A-F7O*|k!!n{78CZM4!5HtdLfz&CWZVVwcV(0od462y
z`?DHDJs78hG~Xt1YscchEC#=a_(cg)TY8DdIP4ci(~gNh7ykp8nPp{&oVXk&y){iG
znNRkk_VIx4b74QOtwq#F^M?E^e0~;Ld9oSz)~93<CubLNBu4RNu#d9LANFbcpWT&+
z!hhK}=gv*=B%QmqgB+I~f^B6TO*_d0Nh8j6q~Ao!8Tl1EC%p2Q<address@hidden<yR8h$
z(HhLT`f&P~8x|*g9Ag|;^16HF^5s@<iS0YLh!#9M^yA;$n1iSG8RGv*1{9^A_pGev
zoY?K_>7G!?3%?ylPfUGCPZ>Loo}^{vy61j5rDwJl+k2#|address@hidden|gdkR1hfa2tt
z!8^BTl6ldM(O2}%?40xo73a7ZfR=hFtj~)<)x^Ck*MPA&KJTs6&FW~Q+gx+WqdWuP
zwj7<#%k!LgwUzf_jJb_T(~No>BAhfLJ4#lg<myIu0|O|&?5|JY_Du0*(`J<|@>^d{
zKeHUemlXG&zEmA$&Ow<KHh_H%An|8VWiN4W4J4y%r$6KNEMc_~U5c}QN=H!~-Wg??
z6`VN1<dw6NH&address@hidden(LeW*wo=|})WlHWx3DZ&J
zMOmP&>@%<UjzGgEb2ibIn9*IgyMU!_V*<1{BOoxNcy_#S9WYbRpM(4QoH;fgbB-71
z&7t=g!TjsvR>vE-S>7qC_AHn8N5)8eKDlHhxKZ!rF?45f_DF8?>~S_vJ=-hIao!J>
zv9$g70LF*0;d<x#<hmj3=3_3>RP&}A!>PN#b*shcu<!*8aLp=w#Stj{$}~K6Z;JUA
zzGKY!iynVGeReLCHmzFuKQg9Ak(5uJUY*HD%KRA#P*jJz=rjKm{uTNx3jYp$=8nRD
zAQFWz%EDXt(f;3EpT1&Vx6cmK`JkT(gpcdu{m2I{Ug`mP?|VMz-Jj+I7c^~j^D!Uf
zIC#^I9VZ{WGi8DKKz~p!<V!yI_zx-{d>xn%On#^10`o!f=pL013%o(lHLLl-m~l^%
zeW}FtNZd)|nP+a&-T)4b&Kb<EZ91PaoK7T_KH+6ld#>P~4{~<B&68Ju90G~Zvr!${
zXWS`+&address@hidden<4dRBz^_|?(z8EHr|wIKdM};&address@hidden;BgF953WnX^H
zbFLLwaTW#sw_OjrlSpzPnk6QU6pNsI++{3Y{hAw|ZT9T|>A<address@hidden|`
zb#mLi(nr!>7OFzk12{I_?cpf4g*ft)?n&Z#4*Y&address@hidden<mVLuq4*xfgHR
zG0}z328^W~{L2=xbW(f>7g&8^PjJC`oFvYM#l&_6o)address@hidden
zUkM*SmOY60F)DSP7t5y|address@hidden<C{K4aw<nn4`>address@hidden;UH~W5m
z*q8muvla0lbbinWw5QFFWdN)w$Pebmq5N3JAgiArJqORtk9{Cn_E8VzhlmFPEtT=g
z>3torE$2J#THgoHJyh~yhC^$eu_CT~M1D|1#>y|6A9`N;ILf2k=TT?*2ouM<3HEJ%
z*sm9(I_te;-^AThz18h3=<FS)dtm^fesN%zg>y2G2W+XZ^CrhJ&tif)L|@?%DNq#N
ze);7oSl1Ns5I6OlL7h47c;y*Y{fM~^omnDyLO*q1-ShlT8O%dQo0Tx1HQ85x^L>Oc
z=O&)MQ9Nl_pE(~TNtM=h7^lNwZO+%(oz(S5MS|PCxEPiA??E5;|4CehxCcq|#^|G4
zr|or(y(;Lqwri4fJB!ns&address@hidden(%_{xDIL+fd(`2Kxk3XAuLz(+HILz`i
zq$(ykG@>+9XbV8Uxc#?+s2jyGjT=GVA~AWo+u%dSb~?0DO}T~ZBUm=?-wuWz39~%G
zxk1Zm!g-HS{MEv>C&address@hidden<}?rgE{+qri$_b{%DhrM`44{anQs9
zl>)address@hidden<lJAfZ<qf_XH8gnpFY4tKJo*)qeZ&ydBH9jw!)$?`#MwzH}kM?<k8
z9#;address@hidden|;S06zw5<r<O7N16V1a>e&@address@hidden@f
address@hidden|QJq^Uii)wtbg&(^`P8;xv5abqIEKm=<LDc3L%XKAerv6|v!H
zp6<8-3>Rf=XsC)Pt85hE-!j9f8l(`=FUENSx8_N)Q=2r8umVDCA>mfRr2y}{0QSeV
k?Rpu2fWdXRmM)address@hidden(a(WKOpmTga7~l

literal 0
HcmV?d00001

diff --git a/pc-bios/canyonlands.dts b/pc-bios/canyonlands.dts
new file mode 100644
index 0000000..0d6ac92
--- /dev/null
+++ b/pc-bios/canyonlands.dts
@@ -0,0 +1,566 @@
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <address@hidden>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <1>;
+       model = "amcc,canyonlands";
+       compatible = "amcc,canyonlands";
+       dcr-parent = <&{/cpus/address@hidden>;
+
+       aliases {
+               ethernet0 = &EMAC0;
+               ethernet1 = &EMAC1;
+               serial0 = &UART0;
+               serial1 = &UART1;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               address@hidden {
+                       device_type = "cpu";
+                       model = "PowerPC,460EX";
+                       reg = <0x00000000>;
+                       clock-frequency = <0>; /* Filled in by U-Boot */
+                       timebase-frequency = <0>; /* Filled in by U-Boot */
+                       i-cache-line-size = <32>;
+                       d-cache-line-size = <32>;
+                       i-cache-size = <32768>;
+                       d-cache-size = <32768>;
+                       dcr-controller;
+                       dcr-access-method = "native";
+                       next-level-cache = <&L2C0>;
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by 
U-Boot */
+       };
+
+       UIC0: interrupt-controller0 {
+               compatible = "ibm,uic-460ex","ibm,uic";
+               interrupt-controller;
+               cell-index = <0>;
+               dcr-reg = <0x0c0 0x009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+       };
+
+       UIC1: interrupt-controller1 {
+               compatible = "ibm,uic-460ex","ibm,uic";
+               interrupt-controller;
+               cell-index = <1>;
+               dcr-reg = <0x0d0 0x009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+               interrupt-parent = <&UIC0>;
+       };
+
+       UIC2: interrupt-controller2 {
+               compatible = "ibm,uic-460ex","ibm,uic";
+               interrupt-controller;
+               cell-index = <2>;
+               dcr-reg = <0x0e0 0x009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+               interrupt-parent = <&UIC0>;
+       };
+
+       UIC3: interrupt-controller3 {
+               compatible = "ibm,uic-460ex","ibm,uic";
+               interrupt-controller;
+               cell-index = <3>;
+               dcr-reg = <0x0f0 0x009>;
+               #address-cells = <0>;
+               #size-cells = <0>;
+               #interrupt-cells = <2>;
+               interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+               interrupt-parent = <&UIC0>;
+       };
+
+       SDR0: sdr {
+               compatible = "ibm,sdr-460ex";
+               dcr-reg = <0x00e 0x002>;
+       };
+
+       CPR0: cpr {
+               compatible = "ibm,cpr-460ex";
+               dcr-reg = <0x00c 0x002>;
+       };
+
+       CPM0: cpm {
+               compatible = "ibm,cpm";
+               dcr-access-method = "native";
+               dcr-reg = <0x160 0x003>;
+               unused-units = <0x00000100>;
+               idle-doze = <0x02000000>;
+               standby = <0xfeff791d>;
+       };
+
+       L2C0: l2c {
+               compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
+               dcr-reg = <0x020 0x008          /* Internal SRAM DCR's */
+                          0x030 0x008>;        /* L2 cache DCR's */
+               cache-line-size = <32>;         /* 32 bytes */
+               cache-size = <262144>;          /* L2, 256K */
+               interrupt-parent = <&UIC1>;
+               interrupts = <11 1>;
+       };
+
+       plb {
+               compatible = "ibm,plb-460ex", "ibm,plb4";
+               #address-cells = <2>;
+               #size-cells = <1>;
+               ranges;
+               clock-frequency = <0>; /* Filled in by U-Boot */
+
+               SDRAM0: sdram {
+                       compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+                       dcr-reg = <0x010 0x002>;
+               };
+
+               CRYPTO: address@hidden {
+                       compatible = "amcc,ppc460ex-crypto", 
"amcc,ppc4xx-crypto";
+                       reg = <4 0x00180000 0x80400>;
+                       interrupt-parent = <&UIC0>;
+                       interrupts = <0x1d 0x4>;
+               };
+
+               HWRNG: address@hidden {
+                       compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
+                       reg = <4 0x00110000 0x50>;
+               };
+
+               MAL0: mcmal {
+                       compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+                       dcr-reg = <0x180 0x062>;
+                       num-tx-chans = <2>;
+                       num-rx-chans = <16>;
+                       #address-cells = <0>;
+                       #size-cells = <0>;
+                       interrupt-parent = <&UIC2>;
+                       interrupts = <  /*TXEOB*/ 0x6 0x4
+                                       /*RXEOB*/ 0x7 0x4
+                                       /*SERR*/  0x3 0x4
+                                       /*TXDE*/  0x4 0x4
+                                       /*RXDE*/  0x5 0x4>;
+               };
+
+               USB0: address@hidden {
+                       compatible = "ibm,usb-ehci-460ex", "usb-ehci";
+                       interrupt-parent = <&UIC2>;
+                       interrupts = <0x1d 4>;
+                       reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
+               };
+
+               USB1: address@hidden {
+                       compatible = "ohci-le";
+                       reg = <4 0xbffd0000 0x60>;
+                       interrupt-parent = <&UIC2>;
+                       interrupts = <0x1e 4>;
+               };
+
+               USBOTG0: address@hidden {
+                       compatible = "amcc,dwc-otg";
+                       reg = <0x4 0xbff80000 0x10000>;
+                       interrupt-parent = <&USBOTG0>;
+                       #interrupt-cells = <1>;
+                       #address-cells = <0>;
+                       #size-cells = <0>;
+                       interrupts = <0x0 0x1 0x2>;
+                       interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4
+                                        /* HIGH-POWER */ 0x1 &UIC1 0x1a 0x8
+                                        /* DMA */ 0x2 &UIC0 0xc 0x4>;
+               };
+
+               AHBDMA: address@hidden {
+                       compatible = "snps,dma-spear1340";
+                       reg = <4 0xbffd0800 0x400>;
+                       interrupt-parent = <&UIC3>;
+                       interrupts = <0x5 0x4>;
+                       #dma-cells = <3>;
+               };
+
+               SATA0: address@hidden {
+                       compatible = "amcc,sata-460ex";
+                       reg = <4 0xbffd1000 0x800>;
+                       interrupt-parent = <&UIC3>;
+                       interrupts = <0x0 0x4>;
+                       dmas = <&AHBDMA 0 1 0>;
+                       dma-names = "sata-dma";
+               };
+
+               POB0: opb {
+                       compatible = "ibm,opb-460ex", "ibm,opb";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+                       clock-frequency = <0>; /* Filled in by U-Boot */
+
+                       EBC0: ebc {
+                               compatible = "ibm,ebc-460ex", "ibm,ebc";
+                               dcr-reg = <0x012 0x002>;
+                               #address-cells = <2>;
+                               #size-cells = <1>;
+                               clock-frequency = <0>; /* Filled in by U-Boot */
+                               /* ranges property is supplied by U-Boot */
+                               interrupts = <0x6 0x4>;
+                               interrupt-parent = <&UIC1>;
+
+                               address@hidden,0 {
+                                       compatible = "amd,s29gl512n", 
"cfi-flash";
+                                       bank-width = <2>;
+                                       reg = <0x00000000 0x00000000 
0x04000000>;
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+                                       address@hidden {
+                                               label = "kernel";
+                                               reg = <0x00000000 0x001e0000>;
+                                       };
+                                       address@hidden {
+                                               label = "dtb";
+                                               reg = <0x001e0000 0x00020000>;
+                                       };
+                                       address@hidden {
+                                               label = "ramdisk";
+                                               reg = <0x00200000 0x01400000>;
+                                       };
+                                       address@hidden {
+                                               label = "jffs2";
+                                               reg = <0x01600000 0x00400000>;
+                                       };
+                                       address@hidden {
+                                               label = "user";
+                                               reg = <0x01a00000 0x02560000>;
+                                       };
+                                       address@hidden {
+                                               label = "env";
+                                               reg = <0x03f60000 0x00040000>;
+                                       };
+                                       address@hidden {
+                                               label = "u-boot";
+                                               reg = <0x03fa0000 0x00060000>;
+                                       };
+                               };
+
+                               address@hidden,0 {
+                                       compatible = "amcc,ppc460ex-bcsr";
+                                       reg = <2 0x0 0x9>;
+                               };
+
+                               address@hidden,0 {
+                                       compatible = "ibm,ndfc";
+                                       reg = <0x00000003 0x00000000 
0x00002000>;
+                                       ccr = <0x00001000>;
+                                       bank-settings = <0x80002222>;
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       nand {
+                                               #address-cells = <1>;
+                                               #size-cells = <1>;
+
+                                               address@hidden {
+                                                       label = "u-boot";
+                                                       reg = <0x00000000 
0x00100000>;
+                                               };
+                                               address@hidden {
+                                                       label = "user";
+                                                       reg = <0x00000000 
0x03f00000>;
+                                               };
+                                       };
+                               };
+                       };
+
+                       UART0: address@hidden {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <0xef600300 0x00000008>;
+                               virtual-reg = <0xef600300>;
+                               clock-frequency = <0>; /* Filled in by U-Boot */
+                               current-speed = <0>; /* Filled in by U-Boot */
+                               interrupt-parent = <&UIC1>;
+                               interrupts = <0x1 0x4>;
+                       };
+
+                       UART1: address@hidden {
+                               device_type = "serial";
+                               compatible = "ns16550";
+                               reg = <0xef600400 0x00000008>;
+                               virtual-reg = <0xef600400>;
+                               clock-frequency = <0>; /* Filled in by U-Boot */
+                               current-speed = <0>; /* Filled in by U-Boot */
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <0x1 0x4>;
+                       };
+
+                       IIC0: address@hidden {
+                               compatible = "ibm,iic-460ex", "ibm,iic";
+                               reg = <0xef600700 0x00000014>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <0x2 0x4>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                                address@hidden {
+                                        compatible = "st,m41t80";
+                                        reg = <0x68>;
+                                       interrupt-parent = <&UIC2>;
+                                       interrupts = <0x19 0x8>;
+                                };
+                                address@hidden {
+                                        compatible = "ad,ad7414";
+                                        reg = <0x48>;
+                                       interrupt-parent = <&UIC1>;
+                                       interrupts = <0x14 0x8>;
+                                };
+                       };
+
+                       IIC1: address@hidden {
+                               compatible = "ibm,iic-460ex", "ibm,iic";
+                               reg = <0xef600800 0x00000014>;
+                               interrupt-parent = <&UIC0>;
+                               interrupts = <0x3 0x4>;
+                       };
+
+                       GPIO0: address@hidden {
+                               compatible = "ibm,ppc4xx-gpio";
+                               reg = <0xef600b00 0x00000048>;
+                               gpio-controller;
+                       };
+
+                       ZMII0: address@hidden {
+                               compatible = "ibm,zmii-460ex", "ibm,zmii";
+                               reg = <0xef600d00 0x0000000c>;
+                       };
+
+                       RGMII0: address@hidden {
+                               compatible = "ibm,rgmii-460ex", "ibm,rgmii";
+                               reg = <0xef601500 0x00000008>;
+                               has-mdio;
+                       };
+
+                       TAH0: address@hidden {
+                               compatible = "ibm,tah-460ex", "ibm,tah";
+                               reg = <0xef601350 0x00000030>;
+                       };
+
+                       TAH1: address@hidden {
+                               compatible = "ibm,tah-460ex", "ibm,tah";
+                               reg = <0xef601450 0x00000030>;
+                       };
+
+                       EMAC0: address@hidden {
+                               device_type = "network";
+                               compatible = "ibm,emac-460ex", "ibm,emac4sync";
+                               interrupt-parent = <&EMAC0>;
+                               interrupts = <0x0 0x1>;
+                               #interrupt-cells = <1>;
+                               #address-cells = <0>;
+                               #size-cells = <0>;
+                               interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+                                                /*Wake*/   0x1 &UIC2 0x14 0x4>;
+                               reg = <0xef600e00 0x000000c4>;
+                               local-mac-address = [000000000000]; /* Filled 
in by U-Boot */
+                               mal-device = <&MAL0>;
+                               mal-tx-channel = <0>;
+                               mal-rx-channel = <0>;
+                               cell-index = <0>;
+                               max-frame-size = <9000>;
+                               rx-fifo-size = <4096>;
+                               tx-fifo-size = <2048>;
+                               rx-fifo-size-gige = <16384>;
+                               phy-mode = "rgmii";
+                               phy-map = <0x00000000>;
+                               rgmii-device = <&RGMII0>;
+                               rgmii-channel = <0>;
+                               tah-device = <&TAH0>;
+                               tah-channel = <0>;
+                               has-inverted-stacr-oc;
+                               has-new-stacr-staopc;
+                       };
+
+                       EMAC1: address@hidden {
+                               device_type = "network";
+                               compatible = "ibm,emac-460ex", "ibm,emac4sync";
+                               interrupt-parent = <&EMAC1>;
+                               interrupts = <0x0 0x1>;
+                               #interrupt-cells = <1>;
+                               #address-cells = <0>;
+                               #size-cells = <0>;
+                               interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+                                                /*Wake*/   0x1 &UIC2 0x15 0x4>;
+                               reg = <0xef600f00 0x000000c4>;
+                               local-mac-address = [000000000000]; /* Filled 
in by U-Boot */
+                               mal-device = <&MAL0>;
+                               mal-tx-channel = <1>;
+                               mal-rx-channel = <8>;
+                               cell-index = <1>;
+                               max-frame-size = <9000>;
+                               rx-fifo-size = <4096>;
+                               tx-fifo-size = <2048>;
+                               rx-fifo-size-gige = <16384>;
+                               phy-mode = "rgmii";
+                               phy-map = <0x00000000>;
+                               rgmii-device = <&RGMII0>;
+                               rgmii-channel = <1>;
+                               tah-device = <&TAH1>;
+                               tah-channel = <1>;
+                               has-inverted-stacr-oc;
+                               has-new-stacr-staopc;
+                               mdio-device = <&EMAC0>;
+                       };
+               };
+
+               PCIX0: address@hidden {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
+                       primary;
+                       large-inbound-windows;
+                       enable-msi-hole;
+                       reg = <0x0000000c 0x0ec00000   0x00000008       /* 
Config space access */
+                              0x00000000 0x00000000 0x00000000         /* no 
IACK cycles */
+                              0x0000000c 0x0ed00000   0x00000004   /* Special 
cycles */
+                              0x0000000c 0x0ec80000 0x00000100 /* Internal 
registers */
+                              0x0000000c 0x0ec80100  0x000000fc>;      /* 
Internal messaging registers */
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 
0x80000000 0x00000000 0x80000000
+                                 0x02000000 0x00000000 0x00000000 0x0000000c 
0x0ee00000 0x00000000 0x00100000
+                                 0x01000000 0x00000000 0x00000000 0x0000000c 
0x08000000 0x00000000 0x00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 
0x80000000>;
+
+                       /* This drives busses 0 to 0x3f */
+                       bus-range = <0x0 0x3f>;
+
+                       /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 
*/
+                       interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+                       interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
+               };
+
+               PCIE0: address@hidden {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+                       primary;
+                       port = <0x0>; /* port number */
+                       reg = <0x0000000d 0x00000000 0x20000000 /* Config space 
access */
+                              0x0000000c 0x08010000 0x00001000>;       /* 
Registers */
+                       dcr-reg = <0x100 0x020>;
+                       sdr-base = <0x300>;
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 
0x00000000 0x00000000 0x80000000
+                                 0x02000000 0x00000000 0x00000000 0x0000000f 
0x00000000 0x00000000 0x00100000
+                                 0x01000000 0x00000000 0x00000000 0x0000000f 
0x80000000 0x00000000 0x00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 
0x80000000>;
+
+                       /* This drives busses 40 to 0x7f */
+                       bus-range = <0x40 0x7f>;
+
+                       /* Legacy interrupts (note the weird polarity, the 
bridge seems
+                        * to invert PCIe legacy interrupts).
+                        * We are de-swizzling here because the numbers are 
actually for
+                        * port of the root complex virtual P2P bridge. But I 
want
+                        * to avoid putting a node for it in the tree, so the 
numbers
+                        * below are basically de-swizzled numbers.
+                        * The real slot is on idsel 0, so the swizzling is 1:1
+                        */
+                       interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                       interrupt-map = <
+                               0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A 
*/
+                               0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B 
*/
+                               0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C 
*/
+                               0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D 
*/>;
+               };
+
+               PCIE1: address@hidden {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+                       primary;
+                       port = <0x1>; /* port number */
+                       reg = <0x0000000d 0x20000000 0x20000000 /* Config space 
access */
+                              0x0000000c 0x08011000 0x00001000>;       /* 
Registers */
+                       dcr-reg = <0x120 0x020>;
+                       sdr-base = <0x340>;
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 
0x80000000 0x00000000 0x80000000
+                                 0x02000000 0x00000000 0x00000000 0x0000000f 
0x00100000 0x00000000 0x00100000
+                                 0x01000000 0x00000000 0x00000000 0x0000000f 
0x80010000 0x00000000 0x00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 
0x80000000>;
+
+                       /* This drives busses 80 to 0xbf */
+                       bus-range = <0x80 0xbf>;
+
+                       /* Legacy interrupts (note the weird polarity, the 
bridge seems
+                        * to invert PCIe legacy interrupts).
+                        * We are de-swizzling here because the numbers are 
actually for
+                        * port of the root complex virtual P2P bridge. But I 
want
+                        * to avoid putting a node for it in the tree, so the 
numbers
+                        * below are basically de-swizzled numbers.
+                        * The real slot is on idsel 0, so the swizzling is 1:1
+                        */
+                       interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                       interrupt-map = <
+                               0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int 
A */
+                               0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int 
B */
+                               0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int 
C */
+                               0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int 
D */>;
+               };
+
+               MSI: address@hidden {
+                       compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+                       reg = < 0xC 0x10000000 0x100>;
+                       sdr-base = <0x36C>;
+                       msi-data = <0x00000000>;
+                       msi-mask = <0x44440000>;
+                       interrupt-count = <3>;
+                       interrupts = <0 1 2 3>;
+                       interrupt-parent = <&UIC3>;
+                       #interrupt-cells = <1>;
+                       #address-cells = <0>;
+                       #size-cells = <0>;
+                       interrupt-map = <0 &UIC3 0x18 1
+                                       1 &UIC3 0x19 1
+                                       2 &UIC3 0x1A 1
+                                       3 &UIC3 0x1B 1>;
+               };
+       };
+};
-- 
2.7.6




reply via email to

[Prev in Thread] Current Thread [Next in Thread]