[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v11 0/7] Pegasos2 emulation
From: |
David Gibson |
Subject: |
Re: [PATCH v11 0/7] Pegasos2 emulation |
Date: |
Mon, 29 Mar 2021 15:15:25 +1100 |
On Thu, Mar 25, 2021 at 02:50:39PM +0100, BALATON Zoltan wrote:
> Hello,
>
> This is adding a new PPC board called pegasos2. More info on it can be
> found at:
>
> https://osdn.net/projects/qmiga/wiki/SubprojectPegasos2
>
> Currently it needs a firmware ROM image that I cannot include due to
> original copyright holder (bPlan) did not release it under a free
> licence but I have plans to write a replacement in the future. With
> the original board firmware it can boot MorphOS now as:
>
> qemu-system-ppc -M pegasos2 -cdrom morphos.iso -device ati-vga,romfile=""
> -serial stdio
>
> then enter "boot cd boot.img" at the firmware "ok" prompt as described
> in the MorphOS.readme. To boot Linux use same command line with e.g.
> -cdrom debian-8.11.0-powerpc-netinst.iso then enter
> "boot cd install/pegasos"
>
> The last patch adds the actual board code after previous patches
> adding VT8231 and MV64361 system controller chip emulation.
Applied to ppc-for-6.1, thanks.
>
> Regards,
> BALATON Zoltan
>
> v11: Changes to last two patches David asked for during review
>
> v10: Updated comments and added R-b from Mark
>
> v9: Rebased to master
>
> v8: Do not emulate setting of serial port address via register, just
> hard code a default address instead
>
> v7: Fix errp usage in patch 2
>
> v6: Rebased on master, updated commit message about migration change
>
> v5: Changes for review comments from David and Philippe
>
> V4: Rename pegasos2_reset to pegasos2_cpu_reset
> Add new files to MAINTAINERS
>
> BALATON Zoltan (6):
> vt82c686: QOM-ify superio related functionality
> vt82c686: Add VT8231_SUPERIO based on VIA_SUPERIO
> vt82c686: Introduce abstract TYPE_VIA_ISA and base vt82c686b_isa on it
> vt82c686: Add emulation of VT8231 south bridge
> hw/pci-host: Add emulation of Marvell MV64361 PPC system controller
> hw/ppc: Add emulation of Genesi/bPlan Pegasos II
>
> Philippe Mathieu-Daudé (1):
> hw/isa/Kconfig: Add missing dependency VIA VT82C686 -> APM
>
> MAINTAINERS | 10 +
> default-configs/devices/ppc-softmmu.mak | 2 +
> hw/isa/Kconfig | 1 +
> hw/isa/vt82c686.c | 422 +++++++++--
> hw/pci-host/Kconfig | 4 +
> hw/pci-host/meson.build | 2 +
> hw/pci-host/mv64361.c | 951 ++++++++++++++++++++++++
> hw/pci-host/mv643xx.h | 918 +++++++++++++++++++++++
> hw/pci-host/trace-events | 6 +
> hw/ppc/Kconfig | 9 +
> hw/ppc/meson.build | 2 +
> hw/ppc/pegasos2.c | 144 ++++
> include/hw/isa/vt82c686.h | 2 +-
> include/hw/pci-host/mv64361.h | 8 +
> include/hw/pci/pci_ids.h | 4 +-
> 15 files changed, 2403 insertions(+), 82 deletions(-)
> create mode 100644 hw/pci-host/mv64361.c
> create mode 100644 hw/pci-host/mv643xx.h
> create mode 100644 hw/ppc/pegasos2.c
> create mode 100644 include/hw/pci-host/mv64361.h
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
signature.asc
Description: PGP signature
- [PATCH v11 0/7] Pegasos2 emulation, BALATON Zoltan, 2021/03/25
- [PATCH v11 2/7] vt82c686: Add VT8231_SUPERIO based on VIA_SUPERIO, BALATON Zoltan, 2021/03/25
- [PATCH v11 1/7] vt82c686: QOM-ify superio related functionality, BALATON Zoltan, 2021/03/25
- [PATCH v11 7/7] hw/ppc: Add emulation of Genesi/bPlan Pegasos II, BALATON Zoltan, 2021/03/25
- [PATCH v11 5/7] hw/isa/Kconfig: Add missing dependency VIA VT82C686 -> APM, BALATON Zoltan, 2021/03/25
- [PATCH v11 3/7] vt82c686: Introduce abstract TYPE_VIA_ISA and base vt82c686b_isa on it, BALATON Zoltan, 2021/03/25
- [PATCH v11 6/7] hw/pci-host: Add emulation of Marvell MV64361 PPC system controller, BALATON Zoltan, 2021/03/25
- [PATCH v11 4/7] vt82c686: Add emulation of VT8231 south bridge, BALATON Zoltan, 2021/03/25
- Re: [PATCH v11 0/7] Pegasos2 emulation,
David Gibson <=