qemu-ppc
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH] hw: ppc: sam460ex: Disable Ethernet devicetree nodes


From: BALATON Zoltan
Subject: Re: [PATCH] hw: ppc: sam460ex: Disable Ethernet devicetree nodes
Date: Mon, 16 Aug 2021 12:21:33 +0200 (CEST)

On Mon, 16 Aug 2021, David Gibson wrote:
On Sun, Aug 15, 2021 at 07:59:15PM -0700, Guenter Roeck wrote:
IBM EMAC Ethernet controllers are not emulated by qemu. If they are
enabled in devicetree files, they are instantiated in Linux but
obviously won't work. Disable associated devicetree nodes to prevent
unpredictable behavior.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

I'll wait for Zoltan's opinion on this, but this sort of thing is why
I was always pretty dubious about qemu *loading* a dtb file, rather
than generating a dt internally.

We are aiming to emulate the real SoC so we use the same dtb that belongs to that SoC instead of generating something similar but not quite the same. (QEMU also has a -dtb option but I'm not sure how many machines implement it.) So loading a dtb is not bad in my opinion. Given that we don't fully emulate every device in the SoC having devices described in the dtb that we don't have might cause warnings or errors from OSes that try to accesss these but that's all I've seen. I'm not sure what unpredictable behaviour could result apart from some log messages about missing ethernet so this should only be cosmetic to hide those errors. But other than that it likely should not break anything so I'm OK with this patch. (I did not implement ethernet ports becuase they are quite complex and we already have several PCI ethernet devices that work already with guests so it's easier to use those than spend time to implement another ethernet device.)

Regards,
BALATON Zoltan

---
 hw/ppc/sam460ex.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
index 0737234d66..feb356e625 100644
--- a/hw/ppc/sam460ex.c
+++ b/hw/ppc/sam460ex.c
@@ -194,6 +194,14 @@ static int sam460ex_load_device_tree(hwaddr addr,
         _FDT(fdt_nop_node(fdt, offset));
     }

+    /* Ethernet interfaces are not emulated */
+    offset = fdt_node_offset_by_compatible(fdt, -1, "ibm,emac-460ex");
+    while (offset >= 0) {
+        _FDT(fdt_setprop_string(fdt, offset, "status", "disabled"));
+        offset = fdt_node_offset_by_compatible(fdt, offset, "ibm,emac-460ex");
+    }
+
+
     /* set serial port clocks */
     offset = fdt_node_offset_by_compatible(fdt, -1, "ns16550");
     while (offset >= 0) {





reply via email to

[Prev in Thread] Current Thread [Next in Thread]