qemu-ppc
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v2 03/26] fsl_etsec: Use hw/net/mii.h


From: Akihiko Odaki
Subject: [PATCH v2 03/26] fsl_etsec: Use hw/net/mii.h
Date: Tue, 24 Jan 2023 13:31:20 +0900

hw/net/mii.h provides common definitions for MII.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/net/fsl_etsec/etsec.c | 11 ++++++-----
 hw/net/fsl_etsec/etsec.h | 17 -----------------
 hw/net/fsl_etsec/miim.c  |  5 +++--
 include/hw/net/mii.h     |  1 +
 4 files changed, 10 insertions(+), 24 deletions(-)

diff --git a/hw/net/fsl_etsec/etsec.c b/hw/net/fsl_etsec/etsec.c
index c753bfb3a8..798ea33d08 100644
--- a/hw/net/fsl_etsec/etsec.c
+++ b/hw/net/fsl_etsec/etsec.c
@@ -29,6 +29,7 @@
 #include "qemu/osdep.h"
 #include "hw/sysbus.h"
 #include "hw/irq.h"
+#include "hw/net/mii.h"
 #include "hw/ptimer.h"
 #include "hw/qdev-properties.h"
 #include "etsec.h"
@@ -339,11 +340,11 @@ static void etsec_reset(DeviceState *d)
     etsec->rx_buffer_len = 0;
 
     etsec->phy_status =
-        MII_SR_EXTENDED_CAPS    | MII_SR_LINK_STATUS   | MII_SR_AUTONEG_CAPS  |
-        MII_SR_AUTONEG_COMPLETE | MII_SR_PREAMBLE_SUPPRESS |
-        MII_SR_EXTENDED_STATUS  | MII_SR_100T2_HD_CAPS | MII_SR_100T2_FD_CAPS |
-        MII_SR_10T_HD_CAPS      | MII_SR_10T_FD_CAPS   | MII_SR_100X_HD_CAPS  |
-        MII_SR_100X_FD_CAPS     | MII_SR_100T4_CAPS;
+        MII_BMSR_EXTCAP   | MII_BMSR_LINK_ST  | MII_BMSR_AUTONEG  |
+        MII_BMSR_AN_COMP  | MII_BMSR_MFPS     | MII_BMSR_EXTSTAT  |
+        MII_BMSR_100T2_HD | MII_BMSR_100T2_FD |
+        MII_BMSR_10T_HD   | MII_BMSR_10T_FD   |
+        MII_BMSR_100TX_HD | MII_BMSR_100TX_FD | MII_BMSR_100T4;
 
     etsec_update_irq(etsec);
 }
diff --git a/hw/net/fsl_etsec/etsec.h b/hw/net/fsl_etsec/etsec.h
index 3c625c955c..3860864a3f 100644
--- a/hw/net/fsl_etsec/etsec.h
+++ b/hw/net/fsl_etsec/etsec.h
@@ -76,23 +76,6 @@ typedef struct eTSEC_rxtx_bd {
 #define FCB_TX_CTU     (1 << 1)
 #define FCB_TX_NPH     (1 << 0)
 
-/* PHY Status Register */
-#define MII_SR_EXTENDED_CAPS     0x0001    /* Extended register capabilities */
-#define MII_SR_JABBER_DETECT     0x0002    /* Jabber Detected */
-#define MII_SR_LINK_STATUS       0x0004    /* Link Status 1 = link */
-#define MII_SR_AUTONEG_CAPS      0x0008    /* Auto Neg Capable */
-#define MII_SR_REMOTE_FAULT      0x0010    /* Remote Fault Detect */
-#define MII_SR_AUTONEG_COMPLETE  0x0020    /* Auto Neg Complete */
-#define MII_SR_PREAMBLE_SUPPRESS 0x0040    /* Preamble may be suppressed */
-#define MII_SR_EXTENDED_STATUS   0x0100    /* Ext. status info in Reg 0x0F */
-#define MII_SR_100T2_HD_CAPS     0x0200    /* 100T2 Half Duplex Capable */
-#define MII_SR_100T2_FD_CAPS     0x0400    /* 100T2 Full Duplex Capable */
-#define MII_SR_10T_HD_CAPS       0x0800    /* 10T   Half Duplex Capable */
-#define MII_SR_10T_FD_CAPS       0x1000    /* 10T   Full Duplex Capable */
-#define MII_SR_100X_HD_CAPS      0x2000    /* 100X  Half Duplex Capable */
-#define MII_SR_100X_FD_CAPS      0x4000    /* 100X  Full Duplex Capable */
-#define MII_SR_100T4_CAPS        0x8000    /* 100T4 Capable */
-
 /* eTSEC */
 
 /* Number of register in the device */
diff --git a/hw/net/fsl_etsec/miim.c b/hw/net/fsl_etsec/miim.c
index 6bba01c82a..b48d2cb57b 100644
--- a/hw/net/fsl_etsec/miim.c
+++ b/hw/net/fsl_etsec/miim.c
@@ -23,6 +23,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "hw/net/mii.h"
 #include "etsec.h"
 #include "registers.h"
 
@@ -140,8 +141,8 @@ void etsec_miim_link_status(eTSEC *etsec, NetClientState 
*nc)
 {
     /* Set link status */
     if (nc->link_down) {
-        etsec->phy_status &= ~MII_SR_LINK_STATUS;
+        etsec->phy_status &= ~MII_BMSR_LINK_ST;
     } else {
-        etsec->phy_status |= MII_SR_LINK_STATUS;
+        etsec->phy_status |= MII_BMSR_LINK_ST;
     }
 }
diff --git a/include/hw/net/mii.h b/include/hw/net/mii.h
index c6a767a49a..ed1bb52b0f 100644
--- a/include/hw/net/mii.h
+++ b/include/hw/net/mii.h
@@ -55,6 +55,7 @@
 #define MII_BMCR_CTST       (1 << 7)  /* Collision test */
 #define MII_BMCR_SPEED1000  (1 << 6)  /* MSB of Speed (1000) */
 
+#define MII_BMSR_100T4      (1 << 15) /* Can do 100mbps T4 */
 #define MII_BMSR_100TX_FD   (1 << 14) /* Can do 100mbps, full-duplex */
 #define MII_BMSR_100TX_HD   (1 << 13) /* Can do 100mbps, half-duplex */
 #define MII_BMSR_10T_FD     (1 << 12) /* Can do 10mbps, full-duplex */
-- 
2.39.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]