[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH rc2 00/25] target/avr merger
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [PATCH rc2 00/25] target/avr merger |
Date: |
Fri, 24 Jan 2020 02:02:49 +0100 |
On Fri, Jan 24, 2020 at 1:51 AM Philippe Mathieu-Daudé <address@hidden> wrote:
>
> This is the AVR port from Michael release (merge) candidate 2.
>
> Since v1 [1]:
> - Addressed Thomas comments
> - Fixed a non-critical bug in ATmega (incorrect SRAM base address)
> - Added ELF parsing requested by Aleksandar
> - Dropped default machine (as with the ARM port)
>
> Change since rc1:
>
> $ git backport-diff -u avr-rc1 -r origin/master..
> Key:
> [----] : patches are identical
> [####] : number of functional differences between upstream/downstream patch
> [down] : patch is downstream-only
> The flags [FC] indicate (F)unctional and (C)ontextual differences,
> respectively
>
> 001/25:[----] [--] 'target/avr: Add outward facing interfaces and core CPU
> logic'
> 002/25:[----] [--] 'target/avr: Add instruction helpers'
> 003/25:[----] [--] 'target/avr: Add instruction translation - Registers
> definition'
> 004/25:[----] [--] 'target/avr: Add instruction translation - Arithmetic and
> Logic Instructions'
> 005/25:[----] [--] 'target/avr: Add instruction translation - Branch
> Instructions'
> 006/25:[----] [--] 'target/avr: Add instruction translation - Data Transfer
> Instructions'
> 007/25:[----] [--] 'target/avr: Add instruction translation - Bit and
> Bit-test Instructions'
> 008/25:[----] [--] 'target/avr: Add instruction translation - MCU Control
> Instructions'
> 009/25:[----] [--] 'target/avr: Add instruction translation - CPU main
> translation function'
> 010/25:[----] [--] 'target/avr: Add instruction disassembly function'
> 011/25:[----] [--] 'hw/char: Add limited support for Atmel USART peripheral'
> 012/25:[0045] [FC] 'hw/timer: Add limited support for Atmel 16 bit timer
> peripheral'
> 013/25:[----] [--] 'hw/misc: Add Atmel power device'
> 014/25:[0024] [FC] 'target/avr: Add section about AVR into QEMU documentation'
> 015/25:[----] [--] 'target/avr: Register AVR support with the rest of QEMU'
> 016/25:[----] [--] 'target/avr: Add machine none test'
> 017/25:[0002] [FC] 'target/avr: Update MAINTAINERS file'
> 018/25:[down] 'hw/core/loader: Let load_elf populate the
> processor-specific flags'
> 019/25:[down] 'hw/avr: Add helper to load raw/ELF firmware binaries'
> 020/25:[0015] [FC] 'hw/avr: Add some ATmega microcontrollers'
> 021/25:[0040] [FC] 'hw/avr: Add some Arduino boards'
Patchew can be used to quickly visualize the few changes:
https://patchew.org/QEMU/address@hidden/diff/address@hidden/
> 022/25:[----] [--] 'target/avr: Update build system'
> 023/25:[----] [--] 'tests/boot-serial-test: Test some Arduino boards (AVR
> based)'
> 024/25:[----] [--] 'tests/acceptance: Test the Arduino MEGA2560 board'
> 025/25:[----] [--] '.travis.yml: Run the AVR acceptance tests'
>
> Repo: https://gitlab.com/philmd/qemu/commits/avr-rc2
>
> [1] https://www.mail-archive.com/address@hidden/msg672926.html
> Supersedes: <address@hidden>
>
> Michael Rolnik (20):
> target/avr: Add outward facing interfaces and core CPU logic
> target/avr: Add instruction helpers
> target/avr: Add instruction translation - Registers definition
> target/avr: Add instruction translation - Arithmetic and Logic
> Instructions
> target/avr: Add instruction translation - Branch Instructions
> target/avr: Add instruction translation - Data Transfer Instructions
> target/avr: Add instruction translation - Bit and Bit-test
> Instructions
> target/avr: Add instruction translation - MCU Control Instructions
> target/avr: Add instruction translation - CPU main translation
> function
> target/avr: Add instruction disassembly function
> hw/char: Add limited support for Atmel USART peripheral
> hw/timer: Add limited support for Atmel 16 bit timer peripheral
> hw/misc: Add Atmel power device
> target/avr: Add section about AVR into QEMU documentation
> target/avr: Register AVR support with the rest of QEMU
> target/avr: Add machine none test
> target/avr: Update MAINTAINERS file
> target/avr: Update build system
> tests/boot-serial-test: Test some Arduino boards (AVR based)
> tests/acceptance: Test the Arduino MEGA2560 board
>
> Philippe Mathieu-Daudé (5):
> hw/core/loader: Let load_elf populate the processor-specific flags
> hw/avr: Add helper to load raw/ELF firmware binaries
> hw/avr: Add some ATmega microcontrollers
> hw/avr: Add some Arduino boards
> .travis.yml: Run the AVR acceptance tests
>
> qemu-doc.texi | 51 +
> configure | 7 +
> default-configs/avr-softmmu.mak | 5 +
> qapi/machine.json | 3 +-
> hw/avr/atmel_atmega.h | 48 +
> hw/avr/boot.h | 33 +
> include/disas/dis-asm.h | 19 +
> include/elf.h | 2 +
> include/hw/char/atmel_usart.h | 93 +
> include/hw/elf_ops.h | 6 +-
> include/hw/loader.h | 6 +-
> include/hw/misc/atmel_power.h | 46 +
> include/hw/timer/atmel_timer16.h | 94 +
> include/sysemu/arch_init.h | 1 +
> target/avr/cpu-param.h | 37 +
> target/avr/cpu-qom.h | 54 +
> target/avr/cpu.h | 259 +++
> target/avr/helper.h | 29 +
> arch_init.c | 2 +
> hw/avr/arduino.c | 151 ++
> hw/avr/atmel_atmega.c | 470 +++++
> hw/avr/boot.c | 74 +
> hw/char/atmel_usart.c | 320 ++++
> hw/core/loader.c | 15 +-
> hw/misc/atmel_power.c | 112 ++
> hw/riscv/boot.c | 2 +-
> hw/timer/atmel_timer16.c | 605 ++++++
> target/avr/cpu.c | 826 ++++++++
> target/avr/disas.c | 246 +++
> target/avr/gdbstub.c | 84 +
> target/avr/helper.c | 347 ++++
> target/avr/machine.c | 121 ++
> target/avr/translate.c | 2997 ++++++++++++++++++++++++++++++
> tests/qtest/boot-serial-test.c | 11 +
> tests/qtest/machine-none-test.c | 1 +
> .travis.yml | 2 +-
> MAINTAINERS | 30 +
> gdb-xml/avr-cpu.xml | 49 +
> hw/avr/Kconfig | 9 +
> hw/avr/Makefile.objs | 3 +
> hw/char/Kconfig | 3 +
> hw/char/Makefile.objs | 1 +
> hw/misc/Kconfig | 3 +
> hw/misc/Makefile.objs | 2 +
> hw/timer/Kconfig | 3 +
> hw/timer/Makefile.objs | 2 +
> target/avr/Makefile.objs | 34 +
> target/avr/insn.decode | 182 ++
> tests/acceptance/machine_avr6.py | 50 +
> tests/qtest/Makefile.include | 2 +
> 50 files changed, 7539 insertions(+), 13 deletions(-)
> create mode 100644 default-configs/avr-softmmu.mak
> create mode 100644 hw/avr/atmel_atmega.h
> create mode 100644 hw/avr/boot.h
> create mode 100644 include/hw/char/atmel_usart.h
> create mode 100644 include/hw/misc/atmel_power.h
> create mode 100644 include/hw/timer/atmel_timer16.h
> create mode 100644 target/avr/cpu-param.h
> create mode 100644 target/avr/cpu-qom.h
> create mode 100644 target/avr/cpu.h
> create mode 100644 target/avr/helper.h
> create mode 100644 hw/avr/arduino.c
> create mode 100644 hw/avr/atmel_atmega.c
> create mode 100644 hw/avr/boot.c
> create mode 100644 hw/char/atmel_usart.c
> create mode 100644 hw/misc/atmel_power.c
> create mode 100644 hw/timer/atmel_timer16.c
> create mode 100644 target/avr/cpu.c
> create mode 100644 target/avr/disas.c
> create mode 100644 target/avr/gdbstub.c
> create mode 100644 target/avr/helper.c
> create mode 100644 target/avr/machine.c
> create mode 100644 target/avr/translate.c
> create mode 100644 gdb-xml/avr-cpu.xml
> create mode 100644 hw/avr/Kconfig
> create mode 100644 hw/avr/Makefile.objs
> create mode 100644 target/avr/Makefile.objs
> create mode 100644 target/avr/insn.decode
> create mode 100644 tests/acceptance/machine_avr6.py
>
> --
> 2.21.1
>
- Re: [PATCH rc2 21/25] hw/avr: Add some Arduino boards, (continued)
- [PATCH rc2 24/25] tests/acceptance: Test the Arduino MEGA2560 board, Philippe Mathieu-Daudé, 2020/01/23
- [PATCH rc2 25/25] .travis.yml: Run the AVR acceptance tests, Philippe Mathieu-Daudé, 2020/01/23
- Re: [PATCH rc2 00/25] target/avr merger,
Philippe Mathieu-Daudé <=
- Re: [PATCH rc2 00/25] target/avr merger, Thomas Huth, 2020/01/24
- Re: [PATCH rc2 00/25] target/avr merger, Michael Rolnik, 2020/01/24