[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v5 1/6] hw/riscv: virt: Add a machine done notifier
|
From: |
Alistair Francis |
|
Subject: |
[PATCH v5 1/6] hw/riscv: virt: Add a machine done notifier |
|
Date: |
Thu, 28 Apr 2022 09:41:41 +1000 |
From: Alistair Francis <alistair.francis@wdc.com>
Move the binary and device tree loading code to the machine done
notifier. This allows us to prepare for editing the device tree as part
of the notifier.
This is based on similar code in the ARM virt machine.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
include/hw/riscv/virt.h | 1 +
hw/riscv/virt.c | 191 +++++++++++++++++++++-------------------
2 files changed, 102 insertions(+), 90 deletions(-)
diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h
index 78b058ec86..8b8db3fb7c 100644
--- a/include/hw/riscv/virt.h
+++ b/include/hw/riscv/virt.h
@@ -45,6 +45,7 @@ struct RISCVVirtState {
MachineState parent;
/*< public >*/
+ Notifier machine_done;
RISCVHartArrayState soc[VIRT_SOCKETS_MAX];
DeviceState *irqchip[VIRT_SOCKETS_MAX];
PFlashCFI01 *flash[2];
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index b49c5361bd..99ab3d4bca 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -1162,6 +1162,100 @@ static DeviceState *virt_create_aia(RISCVVirtAIAType
aia_type, int aia_guests,
return aplic_m;
}
+static void virt_machine_done(Notifier *notifier, void *data)
+{
+ RISCVVirtState *s = container_of(notifier, RISCVVirtState,
+ machine_done);
+ const MemMapEntry *memmap = virt_memmap;
+ MachineState *machine = MACHINE(s);
+ target_ulong start_addr = memmap[VIRT_DRAM].base;
+ target_ulong firmware_end_addr, kernel_start_addr;
+ uint32_t fdt_load_addr;
+ uint64_t kernel_entry;
+
+ /*
+ * Only direct boot kernel is currently supported for KVM VM,
+ * so the "-bios" parameter is not supported when KVM is enabled.
+ */
+ if (kvm_enabled()) {
+ if (machine->firmware) {
+ if (strcmp(machine->firmware, "none")) {
+ error_report("Machine mode firmware is not supported in "
+ "combination with KVM.");
+ exit(1);
+ }
+ } else {
+ machine->firmware = g_strdup("none");
+ }
+ }
+
+ if (riscv_is_32bit(&s->soc[0])) {
+ firmware_end_addr = riscv_find_and_load_firmware(machine,
+ RISCV32_BIOS_BIN, start_addr, NULL);
+ } else {
+ firmware_end_addr = riscv_find_and_load_firmware(machine,
+ RISCV64_BIOS_BIN, start_addr, NULL);
+ }
+
+ if (machine->kernel_filename) {
+ kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc[0],
+ firmware_end_addr);
+
+ kernel_entry = riscv_load_kernel(machine->kernel_filename,
+ kernel_start_addr, NULL);
+
+ if (machine->initrd_filename) {
+ hwaddr start;
+ hwaddr end = riscv_load_initrd(machine->initrd_filename,
+ machine->ram_size, kernel_entry,
+ &start);
+ qemu_fdt_setprop_cell(machine->fdt, "/chosen",
+ "linux,initrd-start", start);
+ qemu_fdt_setprop_cell(machine->fdt, "/chosen", "linux,initrd-end",
+ end);
+ }
+ } else {
+ /*
+ * If dynamic firmware is used, it doesn't know where is the next mode
+ * if kernel argument is not set.
+ */
+ kernel_entry = 0;
+ }
+
+ if (drive_get(IF_PFLASH, 0, 0)) {
+ /*
+ * Pflash was supplied, let's overwrite the address we jump to after
+ * reset to the base of the flash.
+ */
+ start_addr = virt_memmap[VIRT_FLASH].base;
+ }
+
+ /*
+ * Init fw_cfg. Must be done before riscv_load_fdt, otherwise the device
+ * tree cannot be altered and we get FDT_ERR_NOSPACE.
+ */
+ s->fw_cfg = create_fw_cfg(machine);
+ rom_set_fw(s->fw_cfg);
+
+ /* Compute the fdt load address in dram */
+ fdt_load_addr = riscv_load_fdt(memmap[VIRT_DRAM].base,
+ machine->ram_size, machine->fdt);
+ /* load the reset vector */
+ riscv_setup_rom_reset_vec(machine, &s->soc[0], start_addr,
+ virt_memmap[VIRT_MROM].base,
+ virt_memmap[VIRT_MROM].size, kernel_entry,
+ fdt_load_addr, machine->fdt);
+
+ /*
+ * Only direct boot kernel is currently supported for KVM VM,
+ * So here setup kernel start address and fdt address.
+ * TODO:Support firmware loading and integrate to TCG start
+ */
+ if (kvm_enabled()) {
+ riscv_setup_direct_kernel(kernel_entry, fdt_load_addr);
+ }
+}
+
static void virt_machine_init(MachineState *machine)
{
const MemMapEntry *memmap = virt_memmap;
@@ -1169,10 +1263,6 @@ static void virt_machine_init(MachineState *machine)
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
char *soc_name;
- target_ulong start_addr = memmap[VIRT_DRAM].base;
- target_ulong firmware_end_addr, kernel_start_addr;
- uint32_t fdt_load_addr;
- uint64_t kernel_entry;
DeviceState *mmio_irqchip, *virtio_irqchip, *pcie_irqchip;
int i, base_hartid, hart_count;
@@ -1302,98 +1392,12 @@ static void virt_machine_init(MachineState *machine)
memory_region_add_subregion(system_memory, memmap[VIRT_DRAM].base,
machine->ram);
- /* create device tree */
- create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
- riscv_is_32bit(&s->soc[0]));
-
/* boot rom */
memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom",
memmap[VIRT_MROM].size, &error_fatal);
memory_region_add_subregion(system_memory, memmap[VIRT_MROM].base,
mask_rom);
- /*
- * Only direct boot kernel is currently supported for KVM VM,
- * so the "-bios" parameter is not supported when KVM is enabled.
- */
- if (kvm_enabled()) {
- if (machine->firmware) {
- if (strcmp(machine->firmware, "none")) {
- error_report("Machine mode firmware is not supported in "
- "combination with KVM.");
- exit(1);
- }
- } else {
- machine->firmware = g_strdup("none");
- }
- }
-
- if (riscv_is_32bit(&s->soc[0])) {
- firmware_end_addr = riscv_find_and_load_firmware(machine,
- RISCV32_BIOS_BIN, start_addr, NULL);
- } else {
- firmware_end_addr = riscv_find_and_load_firmware(machine,
- RISCV64_BIOS_BIN, start_addr, NULL);
- }
-
- if (machine->kernel_filename) {
- kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc[0],
- firmware_end_addr);
-
- kernel_entry = riscv_load_kernel(machine->kernel_filename,
- kernel_start_addr, NULL);
-
- if (machine->initrd_filename) {
- hwaddr start;
- hwaddr end = riscv_load_initrd(machine->initrd_filename,
- machine->ram_size, kernel_entry,
- &start);
- qemu_fdt_setprop_cell(machine->fdt, "/chosen",
- "linux,initrd-start", start);
- qemu_fdt_setprop_cell(machine->fdt, "/chosen", "linux,initrd-end",
- end);
- }
- } else {
- /*
- * If dynamic firmware is used, it doesn't know where is the next mode
- * if kernel argument is not set.
- */
- kernel_entry = 0;
- }
-
- if (drive_get(IF_PFLASH, 0, 0)) {
- /*
- * Pflash was supplied, let's overwrite the address we jump to after
- * reset to the base of the flash.
- */
- start_addr = virt_memmap[VIRT_FLASH].base;
- }
-
- /*
- * Init fw_cfg. Must be done before riscv_load_fdt, otherwise the device
- * tree cannot be altered and we get FDT_ERR_NOSPACE.
- */
- s->fw_cfg = create_fw_cfg(machine);
- rom_set_fw(s->fw_cfg);
-
- /* Compute the fdt load address in dram */
- fdt_load_addr = riscv_load_fdt(memmap[VIRT_DRAM].base,
- machine->ram_size, machine->fdt);
- /* load the reset vector */
- riscv_setup_rom_reset_vec(machine, &s->soc[0], start_addr,
- virt_memmap[VIRT_MROM].base,
- virt_memmap[VIRT_MROM].size, kernel_entry,
- fdt_load_addr, machine->fdt);
-
- /*
- * Only direct boot kernel is currently supported for KVM VM,
- * So here setup kernel start address and fdt address.
- * TODO:Support firmware loading and integrate to TCG start
- */
- if (kvm_enabled()) {
- riscv_setup_direct_kernel(kernel_entry, fdt_load_addr);
- }
-
/* SiFive Test MMIO device */
sifive_test_create(memmap[VIRT_TEST].base);
@@ -1429,6 +1433,13 @@ static void virt_machine_init(MachineState *machine)
drive_get(IF_PFLASH, 0, i));
}
virt_flash_map(s, system_memory);
+
+ /* create device tree */
+ create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
+ riscv_is_32bit(&s->soc[0]));
+
+ s->machine_done.notify = virt_machine_done;
+ qemu_add_machine_init_done_notifier(&s->machine_done);
}
static void virt_machine_instance_init(Object *obj)
--
2.35.1
- [PATCH v5 0/6] hw/riscv: Add TPM support to the virt board, Alistair Francis, 2022/04/27
- [PATCH v5 1/6] hw/riscv: virt: Add a machine done notifier,
Alistair Francis <=
- [PATCH v5 2/6] hw/core: Move the ARM sysbus-fdt to core, Alistair Francis, 2022/04/27
- [PATCH v5 3/6] hw/riscv: virt: Create a platform bus, Alistair Francis, 2022/04/27
- [PATCH v5 4/6] hw/riscv: virt: Add support for generating platform FDT entries, Alistair Francis, 2022/04/27
- [PATCH v5 5/6] hw/riscv: virt: Add device plug support, Alistair Francis, 2022/04/27
- [PATCH v5 6/6] hw/riscv: Enable TPM backends, Alistair Francis, 2022/04/27