---
include/standard-headers/drm/drm_fourcc.h | 63 +++-
include/standard-headers/linux/ethtool.h | 81 ++++-
include/standard-headers/linux/fuse.h | 20 +-
.../linux/input-event-codes.h | 4 +
include/standard-headers/linux/pci_regs.h | 2 +
include/standard-headers/linux/virtio_blk.h | 19 ++
include/standard-headers/linux/virtio_bt.h | 8 +
include/standard-headers/linux/virtio_net.h | 4 +
linux-headers/asm-arm64/kvm.h | 1 +
linux-headers/asm-generic/hugetlb_encode.h | 26 +-
linux-headers/asm-generic/mman-common.h | 2 +
linux-headers/asm-mips/mman.h | 2 +
linux-headers/asm-riscv/kvm.h | 7 +
linux-headers/asm-x86/kvm.h | 11 +-
linux-headers/linux/kvm.h | 32 +-
linux-headers/linux/psci.h | 14 +
linux-headers/linux/userfaultfd.h | 4 +
linux-headers/linux/vfio.h | 278 +++++++++++++++++-
18 files changed, 522 insertions(+), 56 deletions(-)
diff --git a/include/standard-headers/drm/drm_fourcc.h
b/include/standard-headers/drm/drm_fourcc.h
index 48b620cbef..69cab17b38 100644
--- a/include/standard-headers/drm/drm_fourcc.h
+++ b/include/standard-headers/drm/drm_fourcc.h
@@ -98,18 +98,42 @@ extern "C" {
#define DRM_FORMAT_INVALID 0
/* color index */
+#define DRM_FORMAT_C1 fourcc_code('C', '1', ' ', ' ') /* [7:0]
C0:C1:C2:C3:C4:C5:C6:C7 1:1:1:1:1:1:1:1 eight pixels/byte */
+#define DRM_FORMAT_C2 fourcc_code('C', '2', ' ', ' ') /* [7:0]
C0:C1:C2:C3 2:2:2:2 four pixels/byte */
+#define DRM_FORMAT_C4 fourcc_code('C', '4', ' ', ' ') /* [7:0] C0:C1
4:4 two pixels/byte */
#define DRM_FORMAT_C8 fourcc_code('C', '8', ' ', ' ') /* [7:0] C */
-/* 8 bpp Red */
+/* 1 bpp Darkness (inverse relationship between channel value and brightness)
*/
+#define DRM_FORMAT_D1 fourcc_code('D', '1', ' ', ' ') /* [7:0]
D0:D1:D2:D3:D4:D5:D6:D7 1:1:1:1:1:1:1:1 eight pixels/byte */
+
+/* 2 bpp Darkness (inverse relationship between channel value and brightness)
*/
+#define DRM_FORMAT_D2 fourcc_code('D', '2', ' ', ' ') /* [7:0]
D0:D1:D2:D3 2:2:2:2 four pixels/byte */
+
+/* 4 bpp Darkness (inverse relationship between channel value and brightness)
*/
+#define DRM_FORMAT_D4 fourcc_code('D', '4', ' ', ' ') /* [7:0] D0:D1
4:4 two pixels/byte */
+
+/* 8 bpp Darkness (inverse relationship between channel value and brightness)
*/
+#define DRM_FORMAT_D8 fourcc_code('D', '8', ' ', ' ') /* [7:0] D */
+
+/* 1 bpp Red (direct relationship between channel value and brightness) */
+#define DRM_FORMAT_R1 fourcc_code('R', '1', ' ', ' ') /* [7:0]
R0:R1:R2:R3:R4:R5:R6:R7 1:1:1:1:1:1:1:1 eight pixels/byte */
+
+/* 2 bpp Red (direct relationship between channel value and brightness) */
+#define DRM_FORMAT_R2 fourcc_code('R', '2', ' ', ' ') /* [7:0]
R0:R1:R2:R3 2:2:2:2 four pixels/byte */
+
+/* 4 bpp Red (direct relationship between channel value and brightness) */
+#define DRM_FORMAT_R4 fourcc_code('R', '4', ' ', ' ') /* [7:0] R0:R1
4:4 two pixels/byte */
+
+/* 8 bpp Red (direct relationship between channel value and brightness) */
#define DRM_FORMAT_R8 fourcc_code('R', '8', ' ', ' ') /* [7:0] R */
-/* 10 bpp Red */
+/* 10 bpp Red (direct relationship between channel value and brightness) */
#define DRM_FORMAT_R10 fourcc_code('R', '1', '0', ' ') /*
[15:0] x:R 6:10 little endian */
-/* 12 bpp Red */
+/* 12 bpp Red (direct relationship between channel value and brightness) */
#define DRM_FORMAT_R12 fourcc_code('R', '1', '2', ' ') /*
[15:0] x:R 4:12 little endian */
-/* 16 bpp Red */
+/* 16 bpp Red (direct relationship between channel value and brightness) */
#define DRM_FORMAT_R16 fourcc_code('R', '1', '6', ' ') /*
[15:0] R little endian */
/* 16 bpp RG */
@@ -204,7 +228,9 @@ extern "C" {
#define DRM_FORMAT_VYUY fourcc_code('V', 'Y', 'U', 'Y') /*
[31:0] Y1:Cb0:Y0:Cr0 8:8:8:8 little endian */
#define DRM_FORMAT_AYUV fourcc_code('A', 'Y', 'U', 'V') /* [31:0] A:Y:Cb:Cr 8:8:8:8 little endian */
+#define DRM_FORMAT_AVUY8888 fourcc_code('A', 'V', 'U', 'Y') /* [31:0]
A:Cr:Cb:Y 8:8:8:8 little endian */
#define DRM_FORMAT_XYUV8888 fourcc_code('X', 'Y', 'U', 'V') /* [31:0]
X:Y:Cb:Cr 8:8:8:8 little endian */
+#define DRM_FORMAT_XVUY8888 fourcc_code('X', 'V', 'U', 'Y') /* [31:0]
X:Cr:Cb:Y 8:8:8:8 little endian */
#define DRM_FORMAT_VUY888 fourcc_code('V', 'U', '2', '4') /* [23:0]
Cr:Cb:Y 8:8:8 little endian */
#define DRM_FORMAT_VUY101010 fourcc_code('V', 'U', '3', '0') /* Y followed
by U then V, 10:10:10. Non-linear modifier only */
@@ -717,6 +743,35 @@ extern "C" {
*/
#define DRM_FORMAT_MOD_VIVANTE_SPLIT_SUPER_TILED fourcc_mod_code(VIVANTE, 4)
+/*
+ * Vivante TS (tile-status) buffer modifiers. They can be combined with all of
+ * the color buffer tiling modifiers defined above. When TS is present it's a
+ * separate buffer containing the clear/compression status of each tile. The
+ * modifiers are defined as VIVANTE_MOD_TS_c_s, where c is the color buffer
+ * tile size in bytes covered by one entry in the status buffer and s is the
+ * number of status bits per entry.
+ * We reserve the top 8 bits of the Vivante modifier space for tile status
+ * clear/compression modifiers, as future cores might add some more TS layout
+ * variations.
+ */
+#define VIVANTE_MOD_TS_64_4 (1ULL << 48)
+#define VIVANTE_MOD_TS_64_2 (2ULL << 48)
+#define VIVANTE_MOD_TS_128_4 (3ULL << 48)
+#define VIVANTE_MOD_TS_256_4 (4ULL << 48)
+#define VIVANTE_MOD_TS_MASK (0xfULL << 48)
+
+/*
+ * Vivante compression modifiers. Those depend on a TS modifier being present
+ * as the TS bits get reinterpreted as compression tags instead of simple
+ * clear markers when compression is enabled.
+ */
+#define VIVANTE_MOD_COMP_DEC400 (1ULL << 52)
+#define VIVANTE_MOD_COMP_MASK (0xfULL << 52)
+
+/* Masking out the extension bits will yield the base modifier. */
+#define VIVANTE_MOD_EXT_MASK (VIVANTE_MOD_TS_MASK | \
+ VIVANTE_MOD_COMP_MASK)
+
/* NVIDIA frame buffer modifiers */
/*
diff --git a/include/standard-headers/linux/ethtool.h
b/include/standard-headers/linux/ethtool.h
index 4537da20cc..87176ab075 100644
--- a/include/standard-headers/linux/ethtool.h
+++ b/include/standard-headers/linux/ethtool.h
@@ -159,8 +159,10 @@ static inline uint32_t ethtool_cmd_speed(const struct
ethtool_cmd *ep)
* in its bus driver structure (e.g. pci_driver::name). Must
* not be an empty string.
* @version: Driver version string; may be an empty string
- * @fw_version: Firmware version string; may be an empty string
- * @erom_version: Expansion ROM version string; may be an empty string
+ * @fw_version: Firmware version string; driver defined; may be an
+ * empty string
+ * @erom_version: Expansion ROM version string; driver defined; may be
+ * an empty string
* @bus_info: Device bus address. This should match the dev_name()
* string for the underlying bus device, if there is one. May be
* an empty string.
@@ -179,10 +181,6 @@ static inline uint32_t ethtool_cmd_speed(const struct
ethtool_cmd *ep)
*
* Users can use the %ETHTOOL_GSSET_INFO command to get the number of
* strings in any string set (from Linux 2.6.34).
- *
- * Drivers should set at most @driver, @version, @fw_version and
- * @bus_info in their get_drvinfo() implementation. The ethtool
- * core fills in the other fields using other driver operations.
*/
struct ethtool_drvinfo {
uint32_t cmd;
@@ -736,6 +734,51 @@ enum ethtool_module_power_mode {
ETHTOOL_MODULE_POWER_MODE_HIGH,
};
+/**
+ * enum ethtool_podl_pse_admin_state - operational state of the PoDL PSE
+ * functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState
+ * @ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN: state of PoDL PSE functions are
+ * unknown
+ * @ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED: PoDL PSE functions are disabled
+ * @ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED: PoDL PSE functions are enabled
+ */
+enum ethtool_podl_pse_admin_state {
+ ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN = 1,
+ ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
+ ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED,
+};
+
+/**
+ * enum ethtool_podl_pse_pw_d_status - power detection status of the PoDL PSE.
+ * IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus:
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN: PoDL PSE
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED: "The enumeration “disabled” is
+ * asserted true when the PoDL PSE state diagram variable mr_pse_enable is
+ * false"
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING: "The enumeration “searching” is
+ * asserted true when either of the PSE state diagram variables
+ * pi_detecting or pi_classifying is true."
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING: "The enumeration “deliveringPower”
+ * is asserted true when the PoDL PSE state diagram variable pi_powered is
+ * true."
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP: "The enumeration “sleep” is asserted
+ * true when the PoDL PSE state diagram variable pi_sleeping is true."
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE: "The enumeration “idle” is asserted true
+ * when the logical combination of the PoDL PSE state diagram variables
+ * pi_prebiased*!pi_sleeping is true."
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR: "The enumeration “error” is asserted
+ * true when the PoDL PSE state diagram variable overload_held is true."
+ */
+enum ethtool_podl_pse_pw_d_status {
+ ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN = 1,
+ ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED,
+ ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING,
+ ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING,
+ ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP,
+ ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE,
+ ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR,
+};
+
/**
* struct ethtool_gstrings - string set for data tagging
* @cmd: Command number = %ETHTOOL_GSTRINGS
@@ -1692,6 +1735,13 @@ enum ethtool_link_mode_bit_indices {
ETHTOOL_LINK_MODE_100baseFX_Half_BIT = 90,
ETHTOOL_LINK_MODE_100baseFX_Full_BIT = 91,
ETHTOOL_LINK_MODE_10baseT1L_Full_BIT = 92,
+ ETHTOOL_LINK_MODE_800000baseCR8_Full_BIT = 93,
+ ETHTOOL_LINK_MODE_800000baseKR8_Full_BIT = 94,
+ ETHTOOL_LINK_MODE_800000baseDR8_Full_BIT = 95,
+ ETHTOOL_LINK_MODE_800000baseDR8_2_Full_BIT = 96,
+ ETHTOOL_LINK_MODE_800000baseSR8_Full_BIT = 97,
+ ETHTOOL_LINK_MODE_800000baseVR8_Full_BIT = 98,
+
/* must be last entry */
__ETHTOOL_LINK_MODE_MASK_NBITS
};
@@ -1803,6 +1853,7 @@ enum ethtool_link_mode_bit_indices {
#define SPEED_100000 100000
#define SPEED_200000 200000
#define SPEED_400000 400000
+#define SPEED_800000 800000
#define SPEED_UNKNOWN -1
@@ -1840,6 +1891,20 @@ static inline int ethtool_validate_duplex(uint8_t duplex)
#define MASTER_SLAVE_STATE_SLAVE 3
#define MASTER_SLAVE_STATE_ERR 4
+/* These are used to throttle the rate of data on the phy interface when the
+ * native speed of the interface is higher than the link speed. These should
+ * not be used for phy interfaces which natively support multiple speeds (e.g.
+ * MII or SGMII).
+ */
+/* No rate matching performed. */
+#define RATE_MATCH_NONE 0
+/* The phy sends pause frames to throttle the MAC. */
+#define RATE_MATCH_PAUSE 1
+/* The phy asserts CRS to prevent the MAC from transmitting. */
+#define RATE_MATCH_CRS 2
+/* The MAC is programmed with a sufficiently-large IPG. */
+#define RATE_MATCH_OPEN_LOOP 3
+
/* Which connector port. */
#define PORT_TP 0x00
#define PORT_AUI 0x01
@@ -2033,8 +2098,8 @@ enum ethtool_reset_flags {
* reported consistently by PHYLIB. Read-only.
* @master_slave_cfg: Master/slave port mode.
* @master_slave_state: Master/slave port state.
+ * @rate_matching: Rate adaptation performed by the PHY
* @reserved: Reserved for future use; see the note on reserved space.
- * @reserved1: Reserved for future use; see the note on reserved space.
* @link_mode_masks: Variable length bitmaps.
*
* If autonegotiation is disabled, the speed and @duplex represent the
@@ -2085,7 +2150,7 @@ struct ethtool_link_settings {
uint8_t transceiver;
uint8_t master_slave_cfg;
uint8_t master_slave_state;
- uint8_t reserved1[1];
+ uint8_t rate_matching;
uint32_t reserved[7];
uint32_t link_mode_masks[];
/* layout of link_mode_masks fields:
diff --git a/include/standard-headers/linux/fuse.h
b/include/standard-headers/linux/fuse.h
index bda06258be..a1af78d989 100644
--- a/include/standard-headers/linux/fuse.h
+++ b/include/standard-headers/linux/fuse.h
@@ -194,6 +194,13 @@
* - add FUSE_SECURITY_CTX init flag
* - add security context to create, mkdir, symlink, and mknod requests
* - add FUSE_HAS_INODE_DAX, FUSE_ATTR_DAX
+ *
+ * 7.37
+ * - add FUSE_TMPFILE
+ *
+ * 7.38
+ * - add FUSE_EXPIRE_ONLY flag to fuse_notify_inval_entry
+ * - add FOPEN_PARALLEL_DIRECT_WRITES
*/
#ifndef _LINUX_FUSE_H
@@ -225,7 +232,7 @@
#define FUSE_KERNEL_VERSION 7
/** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 36
+#define FUSE_KERNEL_MINOR_VERSION 38
/** The node ID of the root inode */
#define FUSE_ROOT_ID 1
@@ -297,6 +304,7 @@ struct fuse_file_lock {
* FOPEN_CACHE_DIR: allow caching this directory
* FOPEN_STREAM: the file is stream-like (no file position at all)
* FOPEN_NOFLUSH: don't flush data cache on close (unless
FUSE_WRITEBACK_CACHE)
+ * FOPEN_PARALLEL_DIRECT_WRITES: Allow concurrent direct writes on the same
inode
*/
#define FOPEN_DIRECT_IO (1 << 0)
#define FOPEN_KEEP_CACHE (1 << 1)
@@ -304,6 +312,7 @@ struct fuse_file_lock {
#define FOPEN_CACHE_DIR (1 << 3)
#define FOPEN_STREAM (1 << 4)
#define FOPEN_NOFLUSH (1 << 5)
+#define FOPEN_PARALLEL_DIRECT_WRITES (1 << 6)
/**
* INIT request/reply flags
@@ -484,6 +493,12 @@ struct fuse_file_lock {
*/
#define FUSE_SETXATTR_ACL_KILL_SGID (1 << 0)
+/**
+ * notify_inval_entry flags
+ * FUSE_EXPIRE_ONLY
+ */
+#define FUSE_EXPIRE_ONLY (1 << 0)
+
enum fuse_opcode {
FUSE_LOOKUP = 1,
FUSE_FORGET = 2, /* no reply */
@@ -533,6 +548,7 @@ enum fuse_opcode {
FUSE_SETUPMAPPING = 48,
FUSE_REMOVEMAPPING = 49,
FUSE_SYNCFS = 50,
+ FUSE_TMPFILE = 51,
/* CUSE specific operations */
CUSE_INIT = 4096,
@@ -911,7 +927,7 @@ struct fuse_notify_inval_inode_out {
struct fuse_notify_inval_entry_out {
uint64_t parent;
uint32_t namelen;
- uint32_t padding;
+ uint32_t flags;
};
struct fuse_notify_delete_out {
diff --git a/include/standard-headers/linux/input-event-codes.h
b/include/standard-headers/linux/input-event-codes.h
index 50790aee5a..f6bab08540 100644
--- a/include/standard-headers/linux/input-event-codes.h
+++ b/include/standard-headers/linux/input-event-codes.h
@@ -614,6 +614,9 @@
#define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */
#define KEY_EMOJI_PICKER 0x249 /* Show/hide emoji picker (HUTRR101) */
#define KEY_DICTATE 0x24a /* Start or Stop Voice Dictation
Session (HUTRR99) */
+#define KEY_CAMERA_ACCESS_ENABLE 0x24b /* Enables programmatic access
to camera devices. (HUTRR72) */
+#define KEY_CAMERA_ACCESS_DISABLE 0x24c /* Disables programmatic access
to camera devices. (HUTRR72) */
+#define KEY_CAMERA_ACCESS_TOGGLE 0x24d /* Toggles the current state of
the camera access control. (HUTRR72) */
#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
@@ -862,6 +865,7 @@
#define ABS_TOOL_WIDTH 0x1c
#define ABS_VOLUME 0x20
+#define ABS_PROFILE 0x21
#define ABS_MISC 0x28
diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h
index 57b8e2ffb1..85ab127881 100644
--- a/include/standard-headers/linux/pci_regs.h
+++ b/include/standard-headers/linux/pci_regs.h
@@ -1058,6 +1058,7 @@
/* Precision Time Measurement */
#define PCI_PTM_CAP 0x04 /* PTM Capability */
#define PCI_PTM_CAP_REQ 0x00000001 /* Requester capable */
+#define PCI_PTM_CAP_RES 0x00000002 /* Responder capable */
#define PCI_PTM_CAP_ROOT 0x00000004 /* Root capable */
#define PCI_PTM_GRANULARITY_MASK 0x0000FF00 /* Clock granularity */
#define PCI_PTM_CTRL 0x08 /* PTM Control */
@@ -1119,6 +1120,7 @@
#define PCI_DOE_STATUS_DATA_OBJECT_READY 0x80000000 /* Data Object
Ready */
#define PCI_DOE_WRITE 0x10 /* DOE Write Data Mailbox Register */
#define PCI_DOE_READ 0x14 /* DOE Read Data Mailbox Register */
+#define PCI_DOE_CAP_SIZEOF 0x18 /* Size of DOE register block */
/* DOE Data Object - note not actually registers */
#define PCI_DOE_DATA_OBJECT_HEADER_1_VID 0x0000ffff
diff --git a/include/standard-headers/linux/virtio_blk.h
b/include/standard-headers/linux/virtio_blk.h
index 2dcc90826a..e81715cd70 100644
--- a/include/standard-headers/linux/virtio_blk.h
+++ b/include/standard-headers/linux/virtio_blk.h
@@ -40,6 +40,7 @@
#define VIRTIO_BLK_F_MQ 12 /* support more than one vq */
#define VIRTIO_BLK_F_DISCARD 13 /* DISCARD is supported */
#define VIRTIO_BLK_F_WRITE_ZEROES 14 /* WRITE ZEROES is supported */
+#define VIRTIO_BLK_F_SECURE_ERASE 16 /* Secure Erase is supported */
/* Legacy feature bits */
#ifndef VIRTIO_BLK_NO_LEGACY
@@ -119,6 +120,21 @@ struct virtio_blk_config {
uint8_t write_zeroes_may_unmap;
uint8_t unused1[3];
+
+ /* the next 3 entries are guarded by VIRTIO_BLK_F_SECURE_ERASE */
+ /*
+ * The maximum secure erase sectors (in 512-byte sectors) for
+ * one segment.
+ */
+ __virtio32 max_secure_erase_sectors;
+ /*
+ * The maximum number of secure erase segments in a
+ * secure erase command.
+ */
+ __virtio32 max_secure_erase_seg;
+ /* Secure erase commands must be aligned to this number of sectors. */
+ __virtio32 secure_erase_sector_alignment;
+
} QEMU_PACKED;
/*
@@ -153,6 +169,9 @@ struct virtio_blk_config {
/* Write zeroes command */
#define VIRTIO_BLK_T_WRITE_ZEROES 13
+/* Secure erase command */
+#define VIRTIO_BLK_T_SECURE_ERASE 14
+
#ifndef VIRTIO_BLK_NO_LEGACY
/* Barrier before this op. */
#define VIRTIO_BLK_T_BARRIER 0x80000000
diff --git a/include/standard-headers/linux/virtio_bt.h
b/include/standard-headers/linux/virtio_bt.h
index 245e1eff4b..a11ecc3f92 100644
--- a/include/standard-headers/linux/virtio_bt.h
+++ b/include/standard-headers/linux/virtio_bt.h
@@ -9,6 +9,7 @@
#define VIRTIO_BT_F_VND_HCI 0 /* Indicates vendor command support */
#define VIRTIO_BT_F_MSFT_EXT 1 /* Indicates MSFT vendor support */
#define VIRTIO_BT_F_AOSP_EXT 2 /* Indicates AOSP vendor support */
+#define VIRTIO_BT_F_CONFIG_V2 3 /* Use second version configuration */
enum virtio_bt_config_type {
VIRTIO_BT_CONFIG_TYPE_PRIMARY = 0,
@@ -28,4 +29,11 @@ struct virtio_bt_config {
uint16_t msft_opcode;
} QEMU_PACKED;
+struct virtio_bt_config_v2 {
+ uint8_t type;
+ uint8_t alignment;
+ uint16_t vendor;
+ uint16_t msft_opcode;
+};
+
#endif /* _LINUX_VIRTIO_BT_H */
diff --git a/include/standard-headers/linux/virtio_net.h
b/include/standard-headers/linux/virtio_net.h
index 42c68caf71..c0e797067a 100644
--- a/include/standard-headers/linux/virtio_net.h
+++ b/include/standard-headers/linux/virtio_net.h
@@ -57,6 +57,9 @@
* Steering */
#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
#define VIRTIO_NET_F_NOTF_COAL 53 /* Device supports
notifications coalescing */
+#define VIRTIO_NET_F_GUEST_USO4 54 /* Guest can handle USOv4 in. */
+#define VIRTIO_NET_F_GUEST_USO6 55 /* Guest can handle USOv6 in. */
+#define VIRTIO_NET_F_HOST_USO 56 /* Host can handle USO in. */
#define VIRTIO_NET_F_HASH_REPORT 57 /* Supports hash report */
#define VIRTIO_NET_F_RSS 60 /* Supports RSS RX steering */
#define VIRTIO_NET_F_RSC_EXT 61 /* extended coalescing info */
@@ -130,6 +133,7 @@ struct virtio_net_hdr_v1 {
#define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */
#define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP
(UFO) */
#define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */
+#define VIRTIO_NET_HDR_GSO_UDP_L4 5 /* GSO frame, IPv4& IPv6 UDP
(USO) */
#define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */
uint8_t gso_type;
__virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
diff --git a/linux-headers/asm-arm64/kvm.h b/linux-headers/asm-arm64/kvm.h
index 4bf2d7246e..a7cfefb3a8 100644
--- a/linux-headers/asm-arm64/kvm.h
+++ b/linux-headers/asm-arm64/kvm.h
@@ -43,6 +43,7 @@
#define __KVM_HAVE_VCPU_EVENTS
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+#define KVM_DIRTY_LOG_PAGE_OFFSET 64
#define KVM_REG_SIZE(id) \
(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
diff --git a/linux-headers/asm-generic/hugetlb_encode.h
b/linux-headers/asm-generic/hugetlb_encode.h
index 4f3d5aaa11..de687009bf 100644
--- a/linux-headers/asm-generic/hugetlb_encode.h
+++ b/linux-headers/asm-generic/hugetlb_encode.h
@@ -20,18 +20,18 @@
#define HUGETLB_FLAG_ENCODE_SHIFT 26
#define HUGETLB_FLAG_ENCODE_MASK 0x3f
-#define HUGETLB_FLAG_ENCODE_16KB (14 << HUGETLB_FLAG_ENCODE_SHIFT)
-#define HUGETLB_FLAG_ENCODE_64KB (16 << HUGETLB_FLAG_ENCODE_SHIFT)
-#define HUGETLB_FLAG_ENCODE_512KB (19 << HUGETLB_FLAG_ENCODE_SHIFT)
-#define HUGETLB_FLAG_ENCODE_1MB (20 <<
HUGETLB_FLAG_ENCODE_SHIFT)
-#define HUGETLB_FLAG_ENCODE_2MB (21 <<
HUGETLB_FLAG_ENCODE_SHIFT)
-#define HUGETLB_FLAG_ENCODE_8MB (23 <<
HUGETLB_FLAG_ENCODE_SHIFT)
-#define HUGETLB_FLAG_ENCODE_16MB (24 << HUGETLB_FLAG_ENCODE_SHIFT)
-#define HUGETLB_FLAG_ENCODE_32MB (25 << HUGETLB_FLAG_ENCODE_SHIFT)
-#define HUGETLB_FLAG_ENCODE_256MB (28 << HUGETLB_FLAG_ENCODE_SHIFT)
-#define HUGETLB_FLAG_ENCODE_512MB (29 << HUGETLB_FLAG_ENCODE_SHIFT)
-#define HUGETLB_FLAG_ENCODE_1GB (30 <<
HUGETLB_FLAG_ENCODE_SHIFT)
-#define HUGETLB_FLAG_ENCODE_2GB (31 <<
HUGETLB_FLAG_ENCODE_SHIFT)
-#define HUGETLB_FLAG_ENCODE_16GB (34 << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_16KB (14U << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_64KB (16U << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_512KB (19U << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_1MB (20U <<
HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_2MB (21U <<
HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_8MB (23U <<
HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_16MB (24U << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_32MB (25U << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_256MB (28U << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_512MB (29U << HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_1GB (30U <<
HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_2GB (31U <<
HUGETLB_FLAG_ENCODE_SHIFT)
+#define HUGETLB_FLAG_ENCODE_16GB (34U << HUGETLB_FLAG_ENCODE_SHIFT)
#endif /* _ASM_GENERIC_HUGETLB_ENCODE_H_ */
diff --git a/linux-headers/asm-generic/mman-common.h
b/linux-headers/asm-generic/mman-common.h
index 6c1aa92a92..6ce1f1ceb4 100644
--- a/linux-headers/asm-generic/mman-common.h
+++ b/linux-headers/asm-generic/mman-common.h
@@ -77,6 +77,8 @@
#define MADV_DONTNEED_LOCKED 24 /* like DONTNEED, but drop locked pages too */
+#define MADV_COLLAPSE 25 /* Synchronous hugepage collapse */
+
/* compatibility flags */
#define MAP_FILE 0
diff --git a/linux-headers/asm-mips/mman.h b/linux-headers/asm-mips/mman.h
index 1be428663c..c6e1fc77c9 100644
--- a/linux-headers/asm-mips/mman.h
+++ b/linux-headers/asm-mips/mman.h
@@ -103,6 +103,8 @@
#define MADV_DONTNEED_LOCKED 24 /* like DONTNEED, but drop locked pages too */
+#define MADV_COLLAPSE 25 /* Synchronous hugepage collapse */
+
/* compatibility flags */
#define MAP_FILE 0
diff --git a/linux-headers/asm-riscv/kvm.h b/linux-headers/asm-riscv/kvm.h
index 7351417afd..92af6f3f05 100644
--- a/linux-headers/asm-riscv/kvm.h
+++ b/linux-headers/asm-riscv/kvm.h
@@ -48,6 +48,10 @@ struct kvm_sregs {
/* CONFIG registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */
struct kvm_riscv_config {
unsigned long isa;
+ unsigned long zicbom_block_size;
+ unsigned long mvendorid;
+ unsigned long marchid;
+ unsigned long mimpid;
};
/* CORE registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */
@@ -98,6 +102,9 @@ enum KVM_RISCV_ISA_EXT_ID {
KVM_RISCV_ISA_EXT_M,
KVM_RISCV_ISA_EXT_SVPBMT,
KVM_RISCV_ISA_EXT_SSTC,
+ KVM_RISCV_ISA_EXT_SVINVAL,
+ KVM_RISCV_ISA_EXT_ZIHINTPAUSE,
+ KVM_RISCV_ISA_EXT_ZICBOM,
KVM_RISCV_ISA_EXT_MAX,
};
diff --git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h
index 46de10a809..2747d2ce14 100644
--- a/linux-headers/asm-x86/kvm.h
+++ b/linux-headers/asm-x86/kvm.h
@@ -53,14 +53,6 @@
/* Architectural interrupt line count. */
#define KVM_NR_INTERRUPTS 256
-struct kvm_memory_alias {
- __u32 slot; /* this has a different namespace than memory slots */
- __u32 flags;
- __u64 guest_phys_addr;
- __u64 memory_size;
- __u64 target_phys_addr;
-};
-
/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
struct kvm_pic_state {
__u8 last_irr; /* edge detection */
@@ -214,6 +206,8 @@ struct kvm_msr_list {
struct kvm_msr_filter_range {
#define KVM_MSR_FILTER_READ (1 << 0)
#define KVM_MSR_FILTER_WRITE (1 << 1)
+#define KVM_MSR_FILTER_RANGE_VALID_MASK (KVM_MSR_FILTER_READ | \
+ KVM_MSR_FILTER_WRITE)
__u32 flags;
__u32 nmsrs; /* number of msrs in bitmap */
__u32 base; /* MSR index the bitmap starts at */
@@ -224,6 +218,7 @@ struct kvm_msr_filter_range {
struct kvm_msr_filter {
#define KVM_MSR_FILTER_DEFAULT_ALLOW (0 << 0)
#define KVM_MSR_FILTER_DEFAULT_DENY (1 << 0)
+#define KVM_MSR_FILTER_VALID_MASK (KVM_MSR_FILTER_DEFAULT_DENY)
__u32 flags;
struct kvm_msr_filter_range ranges[KVM_MSR_FILTER_MAX_RANGES];
};
diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
index ebdafa576d..30b2795d10 100644
--- a/linux-headers/linux/kvm.h
+++ b/linux-headers/linux/kvm.h
@@ -86,14 +86,6 @@ struct kvm_debug_guest {
/* *** End of deprecated interfaces *** */
-/* for KVM_CREATE_MEMORY_REGION */
-struct kvm_memory_region {
- __u32 slot;
- __u32 flags;
- __u64 guest_phys_addr;
- __u64 memory_size; /* bytes */
-};
-
/* for KVM_SET_USER_MEMORY_REGION */
struct kvm_userspace_memory_region {
__u32 slot;
@@ -104,9 +96,9 @@ struct kvm_userspace_memory_region {
};
/*
- * The bit 0 ~ bit 15 of kvm_memory_region::flags are visible for userspace,
- * other bits are reserved for kvm internal use which are defined in
- * include/linux/kvm_host.h.
+ * The bit 0 ~ bit 15 of kvm_userspace_memory_region::flags are visible for
+ * userspace, other bits are reserved for kvm internal use which are defined
+ * in include/linux/kvm_host.h.
*/
#define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0)
#define KVM_MEM_READONLY (1UL << 1)
@@ -483,6 +475,9 @@ struct kvm_run {
#define KVM_MSR_EXIT_REASON_INVAL (1 << 0)
#define KVM_MSR_EXIT_REASON_UNKNOWN (1 << 1)
#define KVM_MSR_EXIT_REASON_FILTER (1 << 2)
+#define KVM_MSR_EXIT_REASON_VALID_MASK (KVM_MSR_EXIT_REASON_INVAL | \
+ KVM_MSR_EXIT_REASON_UNKNOWN | \
+ KVM_MSR_EXIT_REASON_FILTER)
__u32 reason; /* kernel -> user */
__u32 index; /* kernel -> user */
__u64 data; /* kernel <-> user */
@@ -1175,6 +1170,9 @@ struct kvm_ppc_resize_hpt {
#define KVM_CAP_VM_DISABLE_NX_HUGE_PAGES 220
#define KVM_CAP_S390_ZPCI_OP 221
#define KVM_CAP_S390_CPU_TOPOLOGY 222
+#define KVM_CAP_DIRTY_LOG_RING_ACQ_REL 223
+#define KVM_CAP_S390_PROTECTED_ASYNC_DISABLE 224
+#define KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP 225
#ifdef KVM_CAP_IRQ_ROUTING
@@ -1264,6 +1262,7 @@ struct kvm_x86_mce {
#define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 3)
#define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL (1 << 4)
#define KVM_XEN_HVM_CONFIG_EVTCHN_SEND (1 << 5)
+#define KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG (1 << 6)
struct kvm_xen_hvm_config {
__u32 flags;
@@ -1434,18 +1433,12 @@ struct kvm_vfio_spapr_tce {
__s32 tablefd;
};
-/*
- * ioctls for VM fds
- */
-#define KVM_SET_MEMORY_REGION _IOW(KVMIO, 0x40, struct kvm_memory_region)
/*
* KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns
* a vcpu fd.
*/
#define KVM_CREATE_VCPU _IO(KVMIO, 0x41)
#define KVM_GET_DIRTY_LOG _IOW(KVMIO, 0x42, struct kvm_dirty_log)
-/* KVM_SET_MEMORY_ALIAS is obsolete: */
-#define KVM_SET_MEMORY_ALIAS _IOW(KVMIO, 0x43, struct kvm_memory_alias)
#define KVM_SET_NR_MMU_PAGES _IO(KVMIO, 0x44)
#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45)
#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \
@@ -1737,6 +1730,8 @@ enum pv_cmd_id {
KVM_PV_UNSHARE_ALL,
KVM_PV_INFO,
KVM_PV_DUMP,
+ KVM_PV_ASYNC_CLEANUP_PREPARE,
+ KVM_PV_ASYNC_CLEANUP_PERFORM,
};
struct kvm_pv_cmd {
@@ -1767,6 +1762,7 @@ struct kvm_xen_hvm_attr {
union {
__u8 long_mode;
__u8 vector;
+ __u8 runstate_update_flag;
struct {
__u64 gfn;
} shared_info;
@@ -1807,6 +1803,8 @@ struct kvm_xen_hvm_attr {
/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */
#define KVM_XEN_ATTR_TYPE_EVTCHN 0x3
#define KVM_XEN_ATTR_TYPE_XEN_VERSION 0x4
+/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG */
+#define KVM_XEN_ATTR_TYPE_RUNSTATE_UPDATE_FLAG 0x5
/* Per-vCPU Xen attributes */
#define KVM_XEN_VCPU_GET_ATTR _IOWR(KVMIO, 0xca, struct kvm_xen_vcpu_attr)
diff --git a/linux-headers/linux/psci.h b/linux-headers/linux/psci.h
index 213b2a0f70..e60dfd8907 100644
--- a/linux-headers/linux/psci.h
+++ b/linux-headers/linux/psci.h
@@ -48,12 +48,26 @@
#define PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU PSCI_0_2_FN64(7)
#define PSCI_1_0_FN_PSCI_FEATURES PSCI_0_2_FN(10)
+#define PSCI_1_0_FN_CPU_FREEZE PSCI_0_2_FN(11)
+#define PSCI_1_0_FN_CPU_DEFAULT_SUSPEND PSCI_0_2_FN(12)
+#define PSCI_1_0_FN_NODE_HW_STATE PSCI_0_2_FN(13)
#define PSCI_1_0_FN_SYSTEM_SUSPEND PSCI_0_2_FN(14)
#define PSCI_1_0_FN_SET_SUSPEND_MODE PSCI_0_2_FN(15)
+#define PSCI_1_0_FN_STAT_RESIDENCY PSCI_0_2_FN(16)
+#define PSCI_1_0_FN_STAT_COUNT PSCI_0_2_FN(17)
+
#define PSCI_1_1_FN_SYSTEM_RESET2 PSCI_0_2_FN(18)
+#define PSCI_1_1_FN_MEM_PROTECT PSCI_0_2_FN(19)
+#define PSCI_1_1_FN_MEM_PROTECT_CHECK_RANGE PSCI_0_2_FN(19)
+#define PSCI_1_0_FN64_CPU_DEFAULT_SUSPEND PSCI_0_2_FN64(12)
+#define PSCI_1_0_FN64_NODE_HW_STATE PSCI_0_2_FN64(13)
#define PSCI_1_0_FN64_SYSTEM_SUSPEND PSCI_0_2_FN64(14)
+#define PSCI_1_0_FN64_STAT_RESIDENCY PSCI_0_2_FN64(16)
+#define PSCI_1_0_FN64_STAT_COUNT PSCI_0_2_FN64(17)
+
#define PSCI_1_1_FN64_SYSTEM_RESET2 PSCI_0_2_FN64(18)
+#define PSCI_1_1_FN64_MEM_PROTECT_CHECK_RANGE PSCI_0_2_FN64(19)
/* PSCI v0.2 power state encoding for CPU_SUSPEND function */
#define PSCI_0_2_POWER_STATE_ID_MASK 0xffff
diff --git a/linux-headers/linux/userfaultfd.h
b/linux-headers/linux/userfaultfd.h
index a3a377cd44..ba5d0df52f 100644
--- a/linux-headers/linux/userfaultfd.h
+++ b/linux-headers/linux/userfaultfd.h
@@ -12,6 +12,10 @@
#include <linux/types.h>
+/* ioctls for /dev/userfaultfd */
+#define USERFAULTFD_IOC 0xAA
+#define USERFAULTFD_IOC_NEW _IO(USERFAULTFD_IOC, 0x00)
+
/*
* If the UFFDIO_API is upgraded someday, the UFFDIO_UNREGISTER and
* UFFDIO_WAKE ioctls should be defined as _IOW and not as _IOR. In
diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h
index ede44b5572..c59692ce0b 100644
--- a/linux-headers/linux/vfio.h
+++ b/linux-headers/linux/vfio.h
@@ -819,12 +819,20 @@ struct vfio_device_feature {
* VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P means that RUNNING_P2P
* is supported in addition to the STOP_COPY states.
*
+ * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_PRE_COPY means that
+ * PRE_COPY is supported in addition to the STOP_COPY states.
+ *
+ * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P | VFIO_MIGRATION_PRE_COPY
+ * means that RUNNING_P2P, PRE_COPY and PRE_COPY_P2P are supported
+ * in addition to the STOP_COPY states.
+ *
* Other combinations of flags have behavior to be defined in the future.
*/
struct vfio_device_feature_migration {
__aligned_u64 flags;
#define VFIO_MIGRATION_STOP_COPY (1 << 0)
#define VFIO_MIGRATION_P2P (1 << 1)
+#define VFIO_MIGRATION_PRE_COPY (1 << 2)
};
#define VFIO_DEVICE_FEATURE_MIGRATION 1
@@ -875,8 +883,13 @@ struct vfio_device_feature_mig_state {
* RESUMING - The device is stopped and is loading a new internal state
* ERROR - The device has failed and must be reset
*
- * And 1 optional state to support VFIO_MIGRATION_P2P:
+ * And optional states to support VFIO_MIGRATION_P2P:
* RUNNING_P2P - RUNNING, except the device cannot do peer to peer DMA
+ * And VFIO_MIGRATION_PRE_COPY:
+ * PRE_COPY - The device is running normally but tracking internal state
+ * changes
+ * And VFIO_MIGRATION_P2P | VFIO_MIGRATION_PRE_COPY:
+ * PRE_COPY_P2P - PRE_COPY, except the device cannot do peer to peer DMA
*
* The FSM takes actions on the arcs between FSM states. The driver implements
* the following behavior for the FSM arcs:
@@ -908,20 +921,48 @@ struct vfio_device_feature_mig_state {
*
* To abort a RESUMING session the device must be reset.
*
+ * PRE_COPY -> RUNNING
* RUNNING_P2P -> RUNNING
* While in RUNNING the device is fully operational, the device may generate
* interrupts, DMA, respond to MMIO, all vfio device regions are functional,
* and the device may advance its internal state.
*
+ * The PRE_COPY arc will terminate a data transfer session.
+ *
+ * PRE_COPY_P2P -> RUNNING_P2P
* RUNNING -> RUNNING_P2P
* STOP -> RUNNING_P2P
* While in RUNNING_P2P the device is partially running in the P2P quiescent
* state defined below.
*
+ * The PRE_COPY_P2P arc will terminate a data transfer session.
+ *
+ * RUNNING -> PRE_COPY
+ * RUNNING_P2P -> PRE_COPY_P2P
* STOP -> STOP_COPY
- * This arc begin the process of saving the device state and will return a
- * new data_fd.
+ * PRE_COPY, PRE_COPY_P2P and STOP_COPY form the "saving group" of states
+ * which share a data transfer session. Moving between these states alters
+ * what is streamed in session, but does not terminate or otherwise affect
+ * the associated fd.
+ *
+ * These arcs begin the process of saving the device state and will return a
+ * new data_fd. The migration driver may perform actions such as enabling
+ * dirty logging of device state when entering PRE_COPY or PER_COPY_P2P.
+ *
+ * Each arc does not change the device operation, the device remains
+ * RUNNING, P2P quiesced or in STOP. The STOP_COPY state is described below
+ * in PRE_COPY_P2P -> STOP_COPY.
+ *
+ * PRE_COPY -> PRE_COPY_P2P
+ * Entering PRE_COPY_P2P continues all the behaviors of PRE_COPY above.
+ * However, while in the PRE_COPY_P2P state, the device is partially running
+ * in the P2P quiescent state defined below, like RUNNING_P2P.
+ *
+ * PRE_COPY_P2P -> PRE_COPY
+ * This arc allows returning the device to a full RUNNING behavior while
+ * continuing all the behaviors of PRE_COPY.
*
+ * PRE_COPY_P2P -> STOP_COPY
* While in the STOP_COPY state the device has the same behavior as STOP
* with the addition that the data transfers session continues to stream the
* migration state. End of stream on the FD indicates the entire device
@@ -939,6 +980,13 @@ struct vfio_device_feature_mig_state {
* device state for this arc if required to prepare the device to receive
the
* migration data.
*
+ * STOP_COPY -> PRE_COPY
+ * STOP_COPY -> PRE_COPY_P2P
+ * These arcs are not permitted and return error if requested. Future
+ * revisions of this API may define behaviors for these arcs, in this case
+ * support will be discoverable by a new flag in
+ * VFIO_DEVICE_FEATURE_MIGRATION.
+ *
* any -> ERROR
* ERROR cannot be specified as a device state, however any transition
request
* can be failed with an errno return and may then move the device_state
into
@@ -950,7 +998,7 @@ struct vfio_device_feature_mig_state {
* The optional peer to peer (P2P) quiescent state is intended to be a
quiescent
* state for the device for the purposes of managing multiple devices within a
* user context where peer-to-peer DMA between devices may be active. The
- * RUNNING_P2P states must prevent the device from initiating
+ * RUNNING_P2P and PRE_COPY_P2P states must prevent the device from initiating
* any new P2P DMA transactions. If the device can identify P2P transactions
* then it can stop only P2P DMA, otherwise it must stop all DMA. The
migration
* driver must complete any such outstanding operations prior to completing
the
@@ -963,6 +1011,8 @@ struct vfio_device_feature_mig_state {
* above FSM arcs. As there are multiple paths through the FSM arcs the path
* should be selected based on the following rules:
* - Select the shortest path.
+ * - The path cannot have saving group states as interior arcs, only
+ * starting/end states.
* Refer to vfio_mig_get_next_state() for the result of the algorithm.
*
* The automatic transit through the FSM arcs that make up the combination
@@ -976,6 +1026,9 @@ struct vfio_device_feature_mig_state {
* support them. The user can discover if these states are supported by using
* VFIO_DEVICE_FEATURE_MIGRATION. By using combination transitions the user
can
* avoid knowing about these optional states if the kernel driver supports
them.
+ *
+ * Arcs touching PRE_COPY and PRE_COPY_P2P are removed if support for PRE_COPY
+ * is not present.
*/
enum vfio_device_mig_state {
VFIO_DEVICE_STATE_ERROR = 0,
@@ -984,8 +1037,225 @@ enum vfio_device_mig_state {
VFIO_DEVICE_STATE_STOP_COPY = 3,
VFIO_DEVICE_STATE_RESUMING = 4,
VFIO_DEVICE_STATE_RUNNING_P2P = 5,
+ VFIO_DEVICE_STATE_PRE_COPY = 6,
+ VFIO_DEVICE_STATE_PRE_COPY_P2P = 7,
+};
+
+/**
+ * VFIO_MIG_GET_PRECOPY_INFO - _IO(VFIO_TYPE, VFIO_BASE + 21)
+ *
+ * This ioctl is used on the migration data FD in the precopy phase of the
+ * migration data transfer. It returns an estimate of the current data sizes
+ * remaining to be transferred. It allows the user to judge when it is
+ * appropriate to leave PRE_COPY for STOP_COPY.
+ *
+ * This ioctl is valid only in PRE_COPY states and kernel driver should
+ * return -EINVAL from any other migration state.
+ *
+ * The vfio_precopy_info data structure returned by this ioctl provides
+ * estimates of data available from the device during the PRE_COPY states.
+ * This estimate is split into two categories, initial_bytes and
+ * dirty_bytes.
+ *
+ * The initial_bytes field indicates the amount of initial precopy
+ * data available from the device. This field should have a non-zero initial
+ * value and decrease as migration data is read from the device.
+ * It is recommended to leave PRE_COPY for STOP_COPY only after this field
+ * reaches zero. Leaving PRE_COPY earlier might make things slower.
+ *
+ * The dirty_bytes field tracks device state changes relative to data
+ * previously retrieved. This field starts at zero and may increase as
+ * the internal device state is modified or decrease as that modified
+ * state is read from the device.
+ *
+ * Userspace may use the combination of these fields to estimate the
+ * potential data size available during the PRE_COPY phases, as well as
+ * trends relative to the rate the device is dirtying its internal
+ * state, but these fields are not required to have any bearing relative
+ * to the data size available during the STOP_COPY phase.
+ *
+ * Drivers have a lot of flexibility in when and what they transfer during the
+ * PRE_COPY phase, and how they report this from VFIO_MIG_GET_PRECOPY_INFO.
+ *
+ * During pre-copy the migration data FD has a temporary "end of stream" that
is
+ * reached when both initial_bytes and dirty_byte are zero. For instance, this
+ * may indicate that the device is idle and not currently dirtying any internal
+ * state. When read() is done on this temporary end of stream the kernel driver
+ * should return ENOMSG from read(). Userspace can wait for more data (which
may
+ * never come) by using poll.
+ *
+ * Once in STOP_COPY the migration data FD has a permanent end of stream
+ * signaled in the usual way by read() always returning 0 and poll always
+ * returning readable. ENOMSG may not be returned in STOP_COPY.
+ * Support for this ioctl is mandatory if a driver claims to support
+ * VFIO_MIGRATION_PRE_COPY.
+ *
+ * Return: 0 on success, -1 and errno set on failure.
+ */
+struct vfio_precopy_info {
+ __u32 argsz;
+ __u32 flags;
+ __aligned_u64 initial_bytes;
+ __aligned_u64 dirty_bytes;
+};
+
+#define VFIO_MIG_GET_PRECOPY_INFO _IO(VFIO_TYPE, VFIO_BASE + 21)
+
+/*
+ * Upon VFIO_DEVICE_FEATURE_SET, allow the device to be moved into a low power
+ * state with the platform-based power management. Device use of lower power
+ * states depends on factors managed by the runtime power management core,
+ * including system level support and coordinating support among dependent
+ * devices. Enabling device low power entry does not guarantee lower power
+ * usage by the device, nor is a mechanism provided through this feature to
+ * know the current power state of the device. If any device access happens
+ * (either from the host or through the vfio uAPI) when the device is in the
+ * low power state, then the host will move the device out of the low power
+ * state as necessary prior to the access. Once the access is completed, the
+ * device may re-enter the low power state. For single shot low power support
+ * with wake-up notification, see
+ * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP below. Access to mmap'd
+ * device regions is disabled on LOW_POWER_ENTRY and may only be resumed after
+ * calling LOW_POWER_EXIT.
+ */
+#define VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY 3
+
+/*
+ * This device feature has the same behavior as
+ * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY with the exception that the user
+ * provides an eventfd for wake-up notification. When the device moves out of
+ * the low power state for the wake-up, the host will not allow the device to
+ * re-enter a low power state without a subsequent user call to one of the low
+ * power entry device feature IOCTLs. Access to mmap'd device regions is
+ * disabled on LOW_POWER_ENTRY_WITH_WAKEUP and may only be resumed after the
+ * low power exit. The low power exit can happen either through LOW_POWER_EXIT
+ * or through any other access (where the wake-up notification has been
+ * generated). The access to mmap'd device regions will not trigger low power
+ * exit.
+ *
+ * The notification through the provided eventfd will be generated only when
+ * the device has entered and is resumed from a low power state after
+ * calling this device feature IOCTL. A device that has not entered low power
+ * state, as managed through the runtime power management core, will not
+ * generate a notification through the provided eventfd on access. Calling the
+ * LOW_POWER_EXIT feature is optional in the case where notification has been
+ * signaled on the provided eventfd that a resume from low power has occurred.
+ */
+struct vfio_device_low_power_entry_with_wakeup {
+ __s32 wakeup_eventfd;
+ __u32 reserved;
+};
+
+#define VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP 4
+
+/*
+ * Upon VFIO_DEVICE_FEATURE_SET, disallow use of device low power states as
+ * previously enabled via VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY or
+ * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP device features.
+ * This device feature IOCTL may itself generate a wakeup eventfd notification
+ * in the latter case if the device had previously entered a low power state.
+ */
+#define VFIO_DEVICE_FEATURE_LOW_POWER_EXIT 5
+
+/*
+ * Upon VFIO_DEVICE_FEATURE_SET start/stop device DMA logging.
+ * VFIO_DEVICE_FEATURE_PROBE can be used to detect if the device supports
+ * DMA logging.
+ *
+ * DMA logging allows a device to internally record what DMAs the device is
+ * initiating and report them back to userspace. It is part of the VFIO
+ * migration infrastructure that allows implementing dirty page tracking
+ * during the pre copy phase of live migration. Only DMA WRITEs are logged,
+ * and this API is not connected to VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE.
+ *
+ * When DMA logging is started a range of IOVAs to monitor is provided and the
+ * device can optimize its logging to cover only the IOVA range given. Each
+ * DMA that the device initiates inside the range will be logged by the device
+ * for later retrieval.
+ *
+ * page_size is an input that hints what tracking granularity the device
+ * should try to achieve. If the device cannot do the hinted page size then
+ * it's the driver choice which page size to pick based on its support.
+ * On output the device will return the page size it selected.
+ *
+ * ranges is a pointer to an array of
+ * struct vfio_device_feature_dma_logging_range.
+ *
+ * The core kernel code guarantees to support by minimum num_ranges that fit
+ * into a single kernel page. User space can try higher values but should give
+ * up if the above can't be achieved as of some driver limitations.
+ *
+ * A single call to start device DMA logging can be issued and a matching stop
+ * should follow at the end. Another start is not allowed in the meantime.
+ */
+struct vfio_device_feature_dma_logging_control {
+ __aligned_u64 page_size;
+ __u32 num_ranges;
+ __u32 __reserved;
+ __aligned_u64 ranges;
};
+struct vfio_device_feature_dma_logging_range {
+ __aligned_u64 iova;
+ __aligned_u64 length;
+};
+
+#define VFIO_DEVICE_FEATURE_DMA_LOGGING_START 6
+
+/*
+ * Upon VFIO_DEVICE_FEATURE_SET stop device DMA logging that was started
+ * by VFIO_DEVICE_FEATURE_DMA_LOGGING_START
+ */
+#define VFIO_DEVICE_FEATURE_DMA_LOGGING_STOP 7
+
+/*
+ * Upon VFIO_DEVICE_FEATURE_GET read back and clear the device DMA log
+ *
+ * Query the device's DMA log for written pages within the given IOVA range.
+ * During querying the log is cleared for the IOVA range.
+ *
+ * bitmap is a pointer to an array of u64s that will hold the output bitmap
+ * with 1 bit reporting a page_size unit of IOVA. The mapping of IOVA to bits
+ * is given by:
+ * bitmap[(addr - iova)/page_size] & (1ULL << (addr % 64))
+ *
+ * The input page_size can be any power of two value and does not have to
+ * match the value given to VFIO_DEVICE_FEATURE_DMA_LOGGING_START. The driver
+ * will format its internal logging to match the reporting page size, possibly
+ * by replicating bits if the internal page size is lower than requested.
+ *
+ * The LOGGING_REPORT will only set bits in the bitmap and never clear or
+ * perform any initialization of the user provided bitmap.
+ *
+ * If any error is returned userspace should assume that the dirty log is
+ * corrupted. Error recovery is to consider all memory dirty and try to
+ * restart the dirty tracking, or to abort/restart the whole migration.
+ *
+ * If DMA logging is not enabled, an error will be returned.
+ *
+ */
+struct vfio_device_feature_dma_logging_report {
+ __aligned_u64 iova;
+ __aligned_u64 length;
+ __aligned_u64 page_size;
+ __aligned_u64 bitmap;
+};
+
+#define VFIO_DEVICE_FEATURE_DMA_LOGGING_REPORT 8
+
+/*
+ * Upon VFIO_DEVICE_FEATURE_GET read back the estimated data length that will
+ * be required to complete stop copy.
+ *
+ * Note: Can be called on each device state.
+ */
+
+struct vfio_device_feature_mig_data_size {
+ __aligned_u64 stop_copy_length;
+};
+
+#define VFIO_DEVICE_FEATURE_MIG_DATA_SIZE 9
+
/* -------- API for Type1 VFIO IOMMU -------- */
/**