qemu-stable
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-stable] [PATCH] ACPI: call acpi_set_pci_info when only acpi en


From: Bruce Rogers
Subject: Re: [Qemu-stable] [PATCH] ACPI: call acpi_set_pci_info when only acpi enabled
Date: Thu, 27 Apr 2017 10:29:12 -0600


>>> On 4/27/2017 at 10:08 AM, Igor Mammedov <address@hidden> wrote: 
> On Thu, 27 Apr 2017 09:44:31 -0600
> "Bruce Rogers" <address@hidden> wrote:
> 
>> >>> On 4/27/2017 at 03:11 AM, Igor Mammedov <address@hidden> wrote: 
>> > On Wed, 26 Apr 2017 13:07:02 -0600
>> > Bruce Rogers <address@hidden> wrote:
>> > 
>> >> Commit f0c9d64a exposed an issue with the code order in acpi_setup.
>> >> As of that commit, a xenfv machine type guest will no longer start
>> >> if using pci passthrough. Re-order the code in that function to
>> >> allow acpi_set_pci_info to be called before bailing on the other,
>> >> non-related conditions. With this change I can again use pci
>> >> passthrough and xenfv together.
>> >> 
>> >> Signed-off-by: Bruce Rogers <address@hidden>
>> > it doesn't look right,
>> > acpi_set_pci_info() is supposed to affect only ACPI based hotplug
>> > 
>> > could you elaborate more on what's going on and
>> > what error you see at startup?
>> 
>> I am using libvirt, driving the creation of the Xen HVM guest via
>> libxl. libxl dynamically attaches the pci device via QMP. In the
>> context of qmp_device_add(), we get a failure in hw/acpi/pcihp.c:
>> acpi_pcihp_device_plug_cb() when it checks for bsel, and errors
>> with the message: "Unsupported bus. Bus doesn't have property
>> 'acpi-pcihp-bsel' set". I guess it wasn't clear from my description
>> that hotplug was involved.
>> 
> is dev->hotplugged in acpi_pcihp_device_plug_cb() true at that time?

Yes it is. It gets set in hw/core/qdev.c:device_initfn().

> 
> the point is that bsel is needed only when there is supporting ACPI code
> and useless otherwise, so acpi_pcihp_device_plug_cb() probably shouldn't
> run under xenfv. I'd try to add compat prop to PIIX4_PM and disable
> acpi_pcihp_device_plug_cb() for xenfv via machine compat property.

I'll look into this then. I'm not too familiar yet with this area of the code.
I simply bisected the problem, which pointed to the commit id referenced
in the patch, and came up with what seemed like the most obvious solution.

> 
>> Bruce
>> 
>> > 
>> >> ---
>> >>  hw/i386/acpi-build.c | 14 +++++++-------
>> >>  1 file changed, 7 insertions(+), 7 deletions(-)
>> >> 
>> >> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
>> >> index 2073108..1ec072f 100644
>> >> --- a/hw/i386/acpi-build.c
>> >> +++ b/hw/i386/acpi-build.c
>> >> @@ -2834,6 +2834,13 @@ void acpi_setup(void)
>> >>      AcpiBuildState *build_state;
>> >>      Object *vmgenid_dev;
>> >>  
>> >> +    if (!acpi_enabled) {
>> >> +        ACPI_BUILD_DPRINTF("ACPI disabled. Bailing out.\n");
>> >> +        return;
>> >> +    }
>> >> +
>> >> +    acpi_set_pci_info();
>> >> +
>> >>      if (!pcms->fw_cfg) {
>> >>          ACPI_BUILD_DPRINTF("No fw cfg. Bailing out.\n");
>> >>          return;
>> >> @@ -2844,15 +2851,8 @@ void acpi_setup(void)
>> >>          return;
>> >>      }
>> >>  
>> >> -    if (!acpi_enabled) {
>> >> -        ACPI_BUILD_DPRINTF("ACPI disabled. Bailing out.\n");
>> >> -        return;
>> >> -    }
>> >> -
>> >>      build_state = g_malloc0(sizeof *build_state);
>> >>  
>> >> -    acpi_set_pci_info();
>> >> -
>> >>      acpi_build_tables_init(&tables);
>> >>      acpi_build(&tables, MACHINE(pcms));
>> >>  
>> 
>> 





reply via email to

[Prev in Thread] Current Thread [Next in Thread]