|
| From: | Justin Clancy |
| Subject: | Qemu v5.2.0 sparc - attempts to power down during startup |
| Date: | Tue, 4 May 2021 15:13:15 +0000 |
|
Hi all, I built QEMU 5.2.0 from source – no errors or warnings. When I try to run up a solaris image I get this: rmat=qcow2,file=hd.qcow2 OpenBIOS for Sparc64 Configuration device id QEMU version 1 machine id 0 kernel cmdline CPUs: 1 x SUNW,UltraSPARC-IIi UUID: 00000000-0000-0000-0000-000000000000 Welcome to OpenBIOS v1.1 built on Mar 16 2021 08:16 Type 'help' for detailed information Trying disk:a... No valid state has been set by load or init-program 0 > boot cdrom:d -s Not a Linux kernel image Not a bootable ELF image Not a bootable a.out image Loading FCode image... Loaded 7420 bytes entry point is 0x4000 Evaluating FCode... Evaluating FCode... Ignoring failed claim for va 1000000 memsz af6d6! Ignoring failed claim for va 1402000 memsz 4dcc8! Ignoring failed claim for va 1800000 memsz 510c8! SunOS Release 5.10 Version Generic_147147-26 64-bit Copyright (c) 1983, 2013, Oracle and/or its affiliates. All rights reserved. could not find debugger-vocabulary-hook>threads:interpret: exception -13 caught interpret \ Copyright (c) 1995-1999 by Sun Microsystems, Inc. \ All rights reserved. \ \ ident "@(#)data64.fth 1.3 00/07/17 SMI" hex only forth also definitions vocabulary kdbg-words also kdbg-words definitions defer p@ defer p! ['] x@ is p@ ['] x! is p! 8 constant ptrsize d# 32 constant nbitsminor h# ffffffff constant maxmin \ \ Copyright 2008 Sun Microsystems, Inc. All rights reserved. \ Use is subject to license terms. \ \ #pragma ident "@(#)kdbg.fth 1.20 08/06/06 SMI" h# 7ff constant v9bias h# unix-tte:interpret: exception -13 caught interpret ' unix-tte is va>tte-data failed with error ffffffffffffffed WARNING: consconfig: cannot find driver for screen device /pci@1fe,0/pci@1,1/QEMU,VGA@2 Booting to milestone "milestone/single-user:default". Configuring devices. WARNING: Interrupt not seen after set_features WARNING: Interrupt not seen after set_features WARNING: Out of range register specification from device node <fdthree> /platform/sun4u/kernel/drv/sparcv9/i8042: undefined symbol 'i_ddi_alloc_ispec' WARNING: mod_load: cannot load module 'i8042' WARNING: Interrupt not seen after set_features WARNING: Interrupt not seen after set_features WARNING: Out of range register specification from device node <fdthree> /platform/sun4u/kernel/drv/sparcv9/i8042: undefined symbol 'i_ddi_alloc_ispec' WARNING: mod_load: cannot load module 'i8042' WARNING: Interrupt not seen after set_features WARNING: Interrupt not seen after set_features WARNING: Out of range register specification from device node <fdthree> /platform/sun4u/kernel/drv/sparcv9/i8042: undefined symbol 'i_ddi_alloc_ispec' WARNING: mod_load: cannot load module 'i8042' Using RPC Bootparams for network configuration information. Attempting to configure interface hme0... WARNING: Power off requested from power button or SC, powering down the system! Skipped interface hme0 Requesting System Maintenance Mode SINGLE USER MODE # WARNING: Failed to shut down the system! And the keyboard does not work. I suspect it’s because of the “WARNING: Power off requested from power button or SC, powering down the system!” Does anyone have an explanation for this? Regards, Justin. Legal Disclaimer: This e-mail communication (and any attachment/s) is confidential and contains proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. |
| [Prev in Thread] | Current Thread | [Next in Thread] |