[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
why screen take long time to (d)etach from remote session and (R)eattach
From: |
ping |
Subject: |
why screen take long time to (d)etach from remote session and (R)eattach from local again? |
Date: |
Tue, 06 Dec 2011 08:37:58 -0500 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:8.0) Gecko/20111110 Thunderbird/8.0 |
I'm observing an issue of screen often and don't know how to handle it:
usually I go back home after work and connect from home via ssh, take
over screen from remote and work from there.
next morning when I came back office I then need detach from remote and
attach it back locally, but the symptom that I often see while doing
this is:
1) hard disk flash crazy (means busy)
2) iotop tell me this:
Total DISK READ: 2.26 M/s | Total DISK WRITE: 0.00 B/s
TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND
24441 be/4 ping 2.26 M/s 0.00 B/s ?unavailable? SCREEN -dR work1
3) system got slow in response, mostly due to HD busy , while overall
CPU is not high at all.
this typically last for at least 3 or 5 minutes.
when I recall back It looks this happened recently when I use "-dR" ,
previously seems when I just use -r I don't remember I ever run into
this (will try this one later).
anyone please send some hints on this..
regards
ping
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- why screen take long time to (d)etach from remote session and (R)eattach from local again?,
ping <=