Hi
Chris,
I think Jim is recommending that you have a copy of
.gnubg/gnubgautorc.rc with your preferred settings for batch
analysis.
In the batch file, before running gnubg, you can have
rename .gnubg/gnubgautorc.rc .gnubg/gnubgautorc.rc.play and
rename .gnubg/gnubgautorc.rc.batch .gnubg/gnubgautorc.rc.
run gnubg bg with commands
Then do the reverse at the end of the batch file to restore
the original settings.
I don’t see much difference between doing that and loading a
command file within gnubg. I suppose the main point is to,
whichever way you do it, restore the settings that you use
when not doing batch analysis, if they are different to your
regular settings.
Set threads n is the command to use to specify a number of
threads. You’d have to look up the number of cores your
processor has, and double it if you have a multithreading
processor like an i7.
I’d do it differently though. I’d use set priority low or set
priority idle. This would let gnubg use all the power when
nothing else is happening, but back off on hogging resources
when you’re doing other stuff. I have set priority idle as a
permanent setting.
Cheers,
Ian
From: Bug-gnubg [mailto:bug-gnubg-bounces+ian.shaw=riverauto.co.uk@gnu.org] On
Behalf Of Chris Wilson
Sent: 02 March 2021 02:12
To: Philippe Michel <philippe.michel7@free.fr>
Cc: bug-gnubg@gnu.org
Subject: Re: No command line?
Thanks to everyone for the information. Ok, I put the
following lines into a file called matches01.txt:
---
set cache 1048576
set cube use on
set analysis movefilter 1 0 4 12 0.32
set analysis movefilter 2 0 4 12 0.32
set analysis movefilter 2 1 -1 0 0
set analysis movefilter 3 0 4 12 0.32
set analysis movefilter 3 1 -1 0 0
set analysis movefilter 3 2 0 4 0.08
set analysis movefilter 4 0 4 12 0.32
set analysis movefilter 4 1 -1 0 0
set analysis movefilter 4 2 0 4 0.08
set analysis movefilter 4 3 -1 0 0
set analysis cubedecision eval plies 4
set analysis chequerplay eval plies 4
set analysis luckanalysis plies 2
set analysis luckanalysis prune on
import mat 'G:\NewMatches\scoper10.mat'
analyze match
save match 'G:\NewMatches\Analyzed\scoper10.sgf'
relational add match
---
I then executed the command gnubg-cli.exe -c matches01.txt and
I received an 'Invalid argument' error. (I'm on Windows 10) I
removed the quotes from around the paths and the error went
away. (The quotes were a requirement 15 years ago) With
respect to the "set analysis" parameters, are you saying to
place them into a separate file and then issue a "load
commands <parameters file>" from within the script?
BTW, what do I issue to set the threads to half the cores?
Chris
On Mon, Mar 1, 2021 at 2:26 PM Philippe Michel <philippe.michel7@free.fr>
wrote:
On Mon, Mar 01, 2021 at 09:23:49PM +0100, Jim Segrave wrote:
> And I then run gnubg:
>
> /usr/local/bin/gnubg -t -c /tmp/4413280.cmd
>
> This works exactly as it should
On Windows the equivalent of gnubg -t is gnubg-cli.exe and the
-c option
works juste the same :
%homepath%\AppData\Local\gnubg\gnubg-cli.exe -c cmdfile.cmd
or something similar.
> My advice for setting options like the luckanalysis ones
would be to
> save your current .gnubg/gnubgautorc.rc file and replace
it one with the
> settings you want here, then put the original back when
you're done.
> Unfortunately, there's no command line option to specify
the
> configuration file to use.
The gnubgautorc file is huge and full of irrelevant
parameters. It would
probably be simpler to start the analysis command files with a
"load
commands <parameters file>", the parameters file
containing the kind of
commands Chris shows at the beginnig of his script.
FWIW, for 4 ply analysis I use:
set cube use on
set analysis movefilter 1 0 4 12 0.32
set analysis movefilter 2 0 4 12 0.32
set analysis movefilter 2 1 -1 0 0
set analysis movefilter 3 0 4 12 0.32
set analysis movefilter 3 1 -1 0 0
set analysis movefilter 3 2 0 4 0.08
set analysis movefilter 4 0 4 12 0.32
set analysis movefilter 4 1 -1 0 0
set analysis movefilter 4 2 0 4 0.08
set analysis movefilter 4 3 -1 0 0
set analysis cubedecision eval plies 4
set analysis chequerplay eval plies 4
set analysis luckanalysis plies 2
set analysis luckanalysis prune on
> On 3/1/21 2:55 PM, Chris Wilson wrote:
> > Years ago I would batch analyze my matches. I wrote
a program that
> > created entries in the following format (minus the
dashes):
> >
> > ---
> > set cache 65536
> > set Priority Idle
> > set analysis luckanalysis plies 2
> > set analysis luckanalysis reduced 2
> > set analysis luckanalysis cubeful on
> >
> > import mat 'G:\NewMatches\scoper10.mat'
> > analyze match
> > save match 'G:\NewMatches\Analyzed\scoper10.sgf'
> > relational add match
reduced is not used any more but everything else should still
work.
Maybe set cache larger since current computers have plenty of
memory, or
rely on the default value set from the GUI. Maybe set threads
to some
value lower than the number of cores of your machine (half of
them ?) if
you run that while doing something else.
> > I would like to accomplish the same task at
> > 4-ply as well as automate rollouts on some matches.
"Automating rollouts on a match" is tricky. There are commands
to mark
moves or cube decsions to be rolled out later. That's fine
from the GUI
or to roll out a list of positions with command files like:
set matchid cAm1ABAAGAAA
set board f/sAACDsdgsKAA
hint
cmark move set rollout 1 2
analyse rollout move
save position pos.sgf
or
set matchid cAmgABAAGAAA
set board //YAAEDtthsAAA
hint
cmark cube set rollout
analyse rollout cube
export position text pos.txt
But there is no easy way to select them automatically in a
whole match.
A way to do this would be to analyse it at, say, 3 ply, and
have commands
like:
cmark move set rollout analysed plies 3
cmark cube set rollout analysed plies 3
analyze rollout match
to roll out the errors and the decisions close enough for the
move
filters to select them for 3 ply analysis.
alas, the first two don't exist... It may be possible to do
this with
the python interface, or to add the above commands to gnubg.