[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
bug#24130: RAID config boot hangs at [...] Clocksource: Switched to cloc
From: |
myglc2 |
Subject: |
bug#24130: RAID config boot hangs at [...] Clocksource: Switched to clocksource tsc |
Date: |
Thu, 12 Jan 2017 23:34:15 -0500 |
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/25.1 (gnu/linux) |
On 01/11/2017 at 23:14 Ludovic Courtès writes:
> Could you tell me if this bug is still relevant?
Hi Ludo’,
Sorry for the delay, I had to swap hardware around to revisit this. I
am now able to assemble 3 arrays as shown below, so I think you should
close the bug.
config:
(define md0
(mapped-device
(source (list "/dev/sdb1" "/dev/sdc1"))
(target "/dev/md0")
(type raid-device-mapping)))
(define md1
(mapped-device
(source (list "/dev/sdb5" "/dev/sdc5"))
(target "/dev/md1")
(type raid-device-mapping)))
(define md2
(mapped-device
(source (list "/dev/sdb6" "/dev/sdc6"))
(target "/dev/md2")
(type raid-device-mapping)))
(operating-system
(host-name "g1")
(timezone "America/New_York")
(locale "en_US.utf8")
(bootloader (grub-configuration (device "/dev/sda")))
(mapped-devices (list md0 md1 md2))
;; Add a kernel module for RAID-1.
(initrd (lambda (file-systems . rest)
(apply base-initrd file-systems
#:extra-modules '("raid1")
rest)))
(file-systems (cons*
(file-system
(device "ssd-root")
(title 'label)
(mount-point "/")
(type "ext4"))
(file-system
(title 'device)
(device "/dev/md0")
(dependencies (list md0))
(mount-point "/mnt/md0")
(create-mount-point? #t)
(type "ext4")
)
(file-system
(title 'device)
(device "/dev/md2")
(dependencies (list md2))
(mount-point "/mnt/md2")
(create-mount-point? #t)
(type "ext4")
)
%base-file-systems))
guix version:
guix (GNU Guix) 0.12.0
v0.12.0-456-gb0a567640