Hi Team
There appears to be some garbage output or issues when running gparted from a command line, Are the errors below harmless or indicative of a deeper issue?
The requested output:
root@raf-desktop:/media/raf/03f89ed2-6a56-4d40-b9be-c9d7cf736084/home# parted /dev/disk/by-id/usb-SanDisk_Extreme_4C530001130321123535-0\:0 print unit s print unit chs print
Model: SanDisk Extreme (scsi)
Disk /dev/sdc: 62.7GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 60.3GB 60.3GB primary ext4 boot
2 60.3GB 62.7GB 2452MB extended
5 60.3GB 62.4GB 2147MB logical linux-swap(v1)
Model: SanDisk Extreme (scsi)
Disk /dev/sdc: 122552320s
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 2048s 117762047s 117760000s primary ext4 boot
2 117762048s 122550271s 4788224s extended
5 117764096s 121958399s 4194304s logical linux-swap(v1)
Model: SanDisk Extreme (scsi)
Disk /dev/sdc: 7628,134,57
Sector size (logical/physical): 512B/512B
BIOS cylinder,head,sector geometry: 7628,255,63. Each cylinder is 8225kB.
Partition Table: msdos
Disk Flags:
Number Start End Type File system Flags
1 0,32,32 7330,88,53 primary ext4 boot
2 7330,88,54 7628,102,25 extended
5 7330,121,23 7591,142,38 logical linux-swap(v1)
The below errors showed up when attempting to resize a pendive with the following steps:
1, Shrink the first partition by about 280 MB
2. Moving the extended partition up
3 Moving up and resizing the swap partition
The goal was to leave some extra space at the end of this pendrive so I can copy the contents onto other 64GB pendrives if needed. The operations seem to have completed successfully.
root@raf-desktop:/media/raf/03f89ed2-6a56-4d40-b9be-c9d7cf736084/home# gparted
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
Unit -.mount does not exist, proceeding anyway.
sh: 0: getcwd() failed: Input/output error
======================
libparted : 3.2
======================
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
sh: 0: getcwd() failed: Input/output error
Regards,
Rafal