Re: [Discuss-gnuradio] USRP2 missing Quadrature samples

[Bob McGwier]

AHA!!

(sheepish grin on face wondering why signals looked real .... because 
they are)


Bob


Leslie Choong wrote:
> Huzzah! It works! I did have the older Flex 2400 daughtercard so I
> moved the resistors around and re burned  it. It now works great.
> Thanks to everyone who helped out, especially Matt and Jonathan!
> -Leslie
>
> On Thu, Feb 5, 2009 at 11:31 AM, Matt Ettus <address@hidden> wrote:
> > Leslie Choong wrote:
> > > Thanks to Johnathan's help it seems my problem is with the USRP2's
> > > recognition of the daughterboard. I used a USRP1 Rev 4.1 to flash my
> > > FLEX 2400 to the rfx2400 EEPROM using this command:
> > > ./burn-db-eeprom -A -t rfx2400 --force
> > Also, are X1 and X101 populated on your RFX2400?  If so, you have a very old
> > non-MIMO_B version, which is probably why you saw this problem in the first
> > place.  If so, you will need to follow the directions here:
> >
> >        http://gnuradio.org/trac/wiki/USRPClockingNotes
> >
> > Look under Flex2400.
> >
> > Matt
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio


--
(Co)Author: DttSP, Quiktrak, PowerSDR, GnuRadio
Member: ARRL, AMSAT, AMSAT-DL, TAPR, Packrats,
NJQRP, QRP ARCI, QCWA, FRC.
"It is human nature to think wisely and act in
an absurd fashion.", Anatole France.