[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Maximum value of samples
From: |
Sebastiaan Heunis |
Subject: |
[Discuss-gnuradio] Maximum value of samples |
Date: |
Tue, 10 Mar 2009 13:22:23 +0200 |
Hi
Can anyone please suggest a setup that I can use to test the maximum
value of samples? I know that we have 16bit signed values. Looking
at the ADC interface on the USRP, we sign extend each 12-bit sample
and add 3 zeros to the right. This should give us a maximum value of
16376 for samples?
I tried using a BasicRX daughterboard. I have a function generator,
inputting a 20MHz, 10dBm signal into the db. In my app I mix this
down to 100kHz using the cordic. I also decimate by 16. The PGA gain
is set to 20dB. The FPGA build is the standard 2rx/2tx with hbf. The
maximum sample value that I get with this is 8635, so I'm using about
half of the ADC's dynamic range.
Sebastiaan
--
Sebastiaan Heunis
Radar and Remote Sensing Group, University of Cape Town
Tel: +27 83 305 5667