[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Can a host control an USRP1 and an USRP2 with th
From: |
Kyle Pearson |
Subject: |
Re: [Discuss-gnuradio] Can a host control an USRP1 and an USRP2 with the same clock? |
Date: |
Fri, 13 Mar 2009 10:12:07 -0400 |
> However, if you buy some more hardware, you can drive both USRP2 and
> USRP1 from the same clock. The USRP2 takes a 10 MHz standard, but the
> USRP2 needs a 64 MHz clock.
You can actually use a common reference between the USRP1 and USRP2 by
modifying some of the USRP2 firmware code so that it can take a
reference other than 10MHz. See
http://gnuradio.org/trac/wiki/USRP2GenFAQ#Doestheexternalfrequencyreferencehavetobe10MHzCanIuse100MHz
This code is located in usrp2/firmware/lib/clocks.c
-Kyle