[Discuss-gnuradio] GRC example of receiver cannot hear radio.

discuss-gnuradio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] GRC example of receiver cannot hear radio.

From:	umer.rabbani
Subject:	[Discuss-gnuradio] GRC example of receiver cannot hear radio.
Date:	Fri, 13 Apr 2012 09:39:38 +0100

I have installed gnu radio using ubuntu. I am using usrp2 with wbx daughter board. I tried to test examples of grc “wfm_rx_pll”. This had a usrp block instead of usrp2 so I replaced it with usrp2 block.

Decimation 128

Gain is 15dB

Frequency is 96.5M but I have a slider option.

I tried to run this file but all I can hear is noise rather radio channel voice.

Regards,

Umer

[Prev in Thread]

Current Thread

[Next in Thread]

[Discuss-gnuradio] GRC example of receiver cannot hear radio., umer.rabbani <=
- Re: [Discuss-gnuradio] GRC example of receiver cannot hear radio., Josh Blum, 2012/04/13

Prev by Date: Re: [Discuss-gnuradio] Data lost whe using big file sources
Next by Date: [Discuss-gnuradio] Trailing whitespaces throughout the tree.
Previous by thread: [Discuss-gnuradio] make test failure at qa_constellation_receiver
Next by thread: Re: [Discuss-gnuradio] GRC example of receiver cannot hear radio.
Index(es):
- Date
- Thread