emacs-elpa-diffs
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[elpa] master 6f97316 27/36: Fix outdated and misformatted docs


From: Noam Postavsky
Subject: [elpa] master 6f97316 27/36: Fix outdated and misformatted docs
Date: Sat, 11 Jun 2016 19:21:11 +0000 (UTC)

branch: master
commit 6f97316551cae9945608c4f7a9fca194a602ddcb
Author: Noam Postavsky <address@hidden>
Commit: Noam Postavsky <address@hidden>

    Fix outdated and misformatted docs
    
    yas-find-snippets was removed by [1].
    
    * doc/snippet-development.org: Add keybindings on same line as command
    names, fixup intra document links, and remove mention of non-existent
    command yas-find-snippets.
    * yasnippet.el (yas-load-snippet-buffer):
    (yas-load-snippet-buffer-and-close): Fix docstring formatting.
    
    [1]: "cleanup: remove `yas/find-snippets\', complicated and no one seems
    to use it anyway" 29 May, 2012 433c93746534ebb062afe4dbc7690f736be72d42.
---
 doc/snippet-development.org |   54 ++++++++++++++++++++-----------------------
 yasnippet.el                |   15 +++++-------
 2 files changed, 31 insertions(+), 38 deletions(-)

diff --git a/doc/snippet-development.org b/doc/snippet-development.org
index c792483..4fd293d 100644
--- a/doc/snippet-development.org
+++ b/doc/snippet-development.org
@@ -8,52 +8,48 @@
 
 There are some ways you can quickly find a snippet file or create a new one:
 
--  =M-x yas-new-snippet=
+-  =M-x yas-new-snippet=, key bindind: =C-c & C-n=
 
-   Creates a new buffer with a template for making a new snippet.
-   The buffer is in =snippet-mode= (see below). When you are done
-   editing the new snippet, use =C-c C-c= to save it. This will
-   prompt for a directory two steps: first, the snippet table
-   (with a default based on the major mode you started in), and then
-   then snippet collection directory (defaults to the first directory
-   in =yas-snippet-dirs=. (See [[file:snippet-organization.org][Organizing 
Snippets]]
-   for more detail on how snippets are organized.)
+   Creates a new buffer with a template for making a new snippet.  The
+   buffer is in =snippet-mode= (see [[snippet-mode][below]]).  When you are 
done editing
+   the new snippet, use [[yas-load-snippet-buffer-and-close][=C-c C-c=]] to 
save it.
 
--  =M-x yas-find-snippets=
-
-   Lets you find the snippet file in the directory the snippet was
-   loaded from (if it exists) like =find-file-other-window=. The
-   directory searching logic is similar to =M-x yas-new-snippet=.
-
--  =M-x yas-visit-snippet-file=
+-  =M-x yas-visit-snippet-file=, key binding: =C-c & C-v=
 
    Prompts you for possible snippet expansions like
    [[sym:yas-insert-snippet][=yas-insert-snippet=]], but instead of expanding 
it, takes you directly
    to the snippet definition's file, if it exists.
 
-Once you find this file it will be set to =snippet-mode= (see ahead) and
-you can start editing your snippet.
+Once you find this file it will be set to =snippet-mode= (see 
[[snippet-mode][ahead]])
+and you can start editing your snippet.
 
-** Using the =snippet-mode= major mode
+** Using the =snippet-mode= major mode <<snippet-mode>>
 
 There is a major mode =snippet-mode= to edit snippets. You can set the
 buffer to this mode with =M-x snippet-mode=. It provides reasonably
 useful syntax highlighting.
 
-Two commands are defined in this mode:
+Three commands are defined in this mode:
+
+-  =M-x yas-load-snippet-buffer=, key binding: =C-c C-l=
+
+   Prompts for a snippet table (with a default based on snippet's
+   major mode) and loads the snippet currently being edited.
 
--  =M-x yas-load-snippet-buffer=
+-  =M-x yas-load-snippet-buffer-and-close=, key binding: =C-c C-c=
+   <<yas-load-snippet-buffer-and-close>>
 
-     When editing a snippet, this loads the snippet into the correct
-     mode and menu. Bound to =C-c C-c= by default while in
-     =snippet-mode=.
+   Like =yas-load-snippet-buffer=, but also saves the snippet and
+   calls =quit-window=.  The destination is decided based on the
+   chosen snippet table and snippet collection directly (defaulting to
+   the first directory in =yas-snippet-dirs= (see 
[[file:snippet-organization.org][Organizing Snippets]]
+   for more detail on how snippets are organized).
 
--  =M-x yas-tryout-snippet=
+-  =M-x yas-tryout-snippet=, key binding: =C-c C-t=
 
-     When editing a snippet, this opens a new empty buffer, sets it to
-     the appropriate major mode and inserts the snippet there, so you
-     can see what it looks like. This is bound to =C-c C-t= while in
-     =snippet-mode=.
+   When editing a snippet, this opens a new empty buffer, sets it to
+   the appropriate major mode and inserts the snippet there, so you
+   can see what it looks like.
 
 There are also /snippets for writing snippets/: =vars=, =$f= and =$m=
 :-).
diff --git a/yasnippet.el b/yasnippet.el
index 4f8bc76..6ecc18d 100644
--- a/yasnippet.el
+++ b/yasnippet.el
@@ -2542,10 +2542,8 @@ neither do the elements of PARENTS."
 
 (defun yas-load-snippet-buffer (table &optional interactive)
   "Parse and load current buffer's snippet definition into TABLE.
-
-TABLE is a symbol naming a passed to `yas--table-get-create'.
-
-When called interactively, prompt for the table name."
+TABLE is a symbol name passed to `yas--table-get-create'.  When
+called interactively, prompt for the table name."
   (interactive (list (yas--read-table) t))
   (cond
    ;;  We have `yas--editing-template', this buffer's content comes from a
@@ -2570,11 +2568,10 @@ When called interactively, prompt for the table name."
                   (yas--table-name (yas--template-table 
yas--editing-template)))))
 
 (defun yas-load-snippet-buffer-and-close (table &optional kill)
-  "Load the snippet with `yas-load-snippet-buffer', possibly
-  save, then `quit-window' if saved.
-
-If the snippet is new, ask the user whether (and where) to save
-it. If the snippet already has a file, just save it.
+  "Load and save the snippet, then `quit-window' if saved.
+Loading is performed by `yas-load-snippet-buffer'.  If the
+snippet is new, ask the user whether (and where) to save it.  If
+the snippet already has a file, just save it.
 
 The prefix argument KILL is passed to `quit-window'.
 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]