[elpa] externals/cpio-mode 6f0676b 25/61: Create install-sh

[Stefan Monnier]

branch: externals/cpio-mode
commit 6f0676b0c19044e55f5efe413ec246368d9703cb
Author: dlewan <address@hidden>
Commit: GitHub <address@hidden>

    Create install-sh
    
    Initial code from local CVS.
---
 install-sh | 248 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 248 insertions(+)

diff --git a/install-sh b/install-sh
new file mode 100644
index 0000000..763aa14
--- /dev/null
+++ b/install-sh
@@ -0,0 +1,248 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5.
+#
+# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# !copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+#
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+tranformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+       -c) instcmd="$cpprog"
+           shift
+           continue;;
+
+       -d) dir_arg=true
+           shift
+           continue;;
+
+       -m) chmodcmd="$chmodprog $2"
+           shift
+           shift
+           continue;;
+
+       -o) chowncmd="$chownprog $2"
+           shift
+           shift
+           continue;;
+
+       -g) chgrpcmd="$chgrpprog $2"
+           shift
+           shift
+           continue;;
+
+       -s) stripcmd="$stripprog"
+           shift
+           continue;;
+
+       -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+           shift
+           continue;;
+
+       -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+           shift
+           continue;;
+
+       *)  if [ x"$src" = x ]
+           then
+               src=$1
+           else
+               # this colon is to work around a 386BSD /bin/sh bug
+               :
+               dst=$1
+           fi
+           shift
+           continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+       echo "install:  no input file specified"
+       exit 1
+else
+       true
+fi
+
+if [ x"$dir_arg" != x ]; then
+       dst=$src
+       src=""
+       
+       if [ -d $dst ]; then
+               instcmd=:
+       else
+               instcmd=mkdir
+       fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+       if [ -f $src -o -d $src ]
+       then
+               true
+       else
+               echo "install:  $src does not exist"
+               exit 1
+       fi
+       
+       if [ x"$dst" = x ]
+       then
+               echo "install:  no destination specified"
+               exit 1
+       else
+               true
+       fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+       if [ -d $dst ]
+       then
+               dst="$dst"/`basename $src`
+       else
+               true
+       fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='   
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@address@hidden' -e 'address@hidden@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+       pathcomp="${pathcomp}${1}"
+       shift
+
+       if [ ! -d "${pathcomp}" ] ;
+        then
+               $mkdirprog "${pathcomp}"
+       else
+               true
+       fi
+
+       pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+       $doit $instcmd $dst &&
+
+       if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+       if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+       if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+       if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+       if [ x"$transformarg" = x ] 
+       then
+               dstfile=`basename $dst`
+       else
+               dstfile=`basename $dst $transformbasename | 
+                       sed $transformarg`$transformbasename
+       fi
+
+# don't allow the sed command to completely eliminate the filename
+
+       if [ x"$dstfile" = x ] 
+       then
+               dstfile=`basename $dst`
+       else
+               true
+       fi
+
+# Make a temp file name in the proper directory.
+
+       dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+       $doit $instcmd $src $dsttmp &&
+
+       trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+       if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+       if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+       if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+       if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+       $doit $rmcmd -f $dstdir/$dstfile &&
+       $doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0
+