[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[nongnu] elpa/inf-clojure bcd806a 251/313: Unify references to the term
From: |
ELPA Syncer |
Subject: |
[nongnu] elpa/inf-clojure bcd806a 251/313: Unify references to the term REPL |
Date: |
Wed, 11 Aug 2021 10:00:28 -0400 (EDT) |
branch: elpa/inf-clojure
commit bcd806a83740c7a0ed094ca295071f0dea1021b4
Author: Bozhidar Batsov <bozhidar@batsov.com>
Commit: Bozhidar Batsov <bozhidar@batsov.com>
Unify references to the term REPL
---
README.md | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/README.md b/README.md
index ef82e4a..8f5cdac 100644
--- a/README.md
+++ b/README.md
@@ -105,7 +105,7 @@ itself exposes. A few commands are:
- show arglists for function `C-c C-a`
- show var documentation `C-c C-v`
- show source `C-c C-s`
-- insert top level form into repl `C-c C-j d`
+- insert top level form into REPL `C-c C-j d`
For a list of all available commands in `inf-clojure-mode` (a.k.a. the
REPL) and `inf-clojure-minor-mode` you can either invoke `C-h f RET
@@ -130,7 +130,7 @@ or by setting them in in your init file.
You can see all the configuration options available using the command
`M-x customize-group RET inf-clojure`.
-The supported repl-features are in an alist called
+The supported REPL-features are in an alist called
`inc-clojure-repl-features` and it has the following shape:
```emacs-lisp
@@ -144,7 +144,7 @@ The supported repl-features are in an alist called
(macroexpand-1 . "(cljs.core/macroexpand-1 '%s)"))))
```
-If you want to add a new repl type, just `(add-to-list
+If you want to add a new REPL type, just `(add-to-list
'inf-clojure-repl-features (cons new-repl-type '((doc
. "(myrepl/doc-command %s") ...)))` since the datastructure is just an
alist of alists.
@@ -163,7 +163,7 @@ connect to a socket REPL, terminal REPLs are inherently
hard to work with and
support will be deprecated in the foreseeable future. If you use the
same project often, make a dir-locals file with this information in
`inf-clojure-custom-startup`.
-Note that if you decide _NOT_ to use the socket repl, it is highly recommended
+Note that if you decide _NOT_ to use the socket REPL, it is highly recommended
you disable output coloring and/or readline facilities: `inf-clojure` does not
filter out ASCII escape characters at the moment and will not behave correctly.
@@ -294,8 +294,8 @@ You can leave it enabled, it just won't show anything in
the echo area.
#### Code Completion
Code completion is a tricky aspect if you are trying to be as close to
-a generic repl as possible. Planck and lumo repl implementations
-explicitly provide completion functions in their repl namespaces. For
+a generic REPL as possible. Planck and lumo REPL implementations
+explicitly provide completion functions in their REPL namespaces. For
clojure, you will need to have a library on your classpath. If you are
using lein, you already have
[clojure-complete](https://github.com/ninjudd/clojure-complete). You
@@ -353,13 +353,13 @@ in order to play nicely with emacs.
### Things seem broken
Inf-clojure is intentionally quite simple and just sends commands to a
-repl on your behalf to provide features. In order to do this
-inf-clojure largely needs to know the repl type so it can format the
+REPL on your behalf to provide features. In order to do this
+inf-clojure largely needs to know the REPL type so it can format the
correct calls. Most end up in `(lumo.repl/doc [symbol])` or
-`(cljs.repl/doc ...)` so its important that the repl type is set
-correctly. This repl type exists in the process buffer (repl) and the
+`(cljs.repl/doc ...)` so its important that the REPL type is set
+correctly. This REPL type exists in the process buffer (REPL) and the
source buffers as a cache. If you have problems, run `m-x
-inf-clojure-set-repl-type` from the source buffer to set the repl type
+inf-clojure-set-repl-type` from the source buffer to set the REPL type
in both buffers. To see how simple inf-clojure is, look at
`inf-clojure-repl-features` to see largely how things are laid out.
- [nongnu] elpa/inf-clojure b357856 112/313: Rename defcustoms to `inf-clojure-*-form` where appropriate, (continued)
- [nongnu] elpa/inf-clojure b357856 112/313: Rename defcustoms to `inf-clojure-*-form` where appropriate, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure 64162aa 138/313: Fix a formatting issue in the README, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure 9d2d143 144/313: Make sure tabs would never sneak in, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure c08d8bb 165/313: Split the only when-let for backward compatibility, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure 94f440e 192/313: Extract keyword words for completion, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure da88c8c 205/313: Require seq library. Fixes https://github.com/clojure-emacs/inf-clojure/issues/141, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure feca1cc 201/313: Send string even when empty, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure 3d72305 208/313: README: Add section describing how to start and connect to a socket server., ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure 0fc2350 225/313: Fix for eldoc-mode for ClojureCLR, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure a61dd84 232/313: Insert top level defun into repl, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure bcd806a 251/313: Unify references to the term REPL,
ELPA Syncer <=
- [nongnu] elpa/inf-clojure a7f07a0 245/313: Set artificial to true on comint-send-input, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure e291da3 274/313: Update README.md, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure 787400f 264/313: [Fix #178] Ensure there is a directory for comint (thanks mcphailm), ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure 6cb8e43 277/313: Update the CI images, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure 477fd7c 272/313: Tweak some wording, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure a98a260 281/313: [#152] Add a changelog entry, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure f4a279e 286/313: [Fix #177] Don't run the tests on Emacs 25, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure b4193fc 289/313: Reindent tests, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure f24722c 294/313: Extract useful functions, ELPA Syncer, 2021/08/11
- [nongnu] elpa/inf-clojure e1a93c7 121/313: Add lock around REPL type detection, ELPA Syncer, 2021/08/11