[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[nongnu] elpa/arduino-mode fbfa013 091/107: format code
From: |
ELPA Syncer |
Subject: |
[nongnu] elpa/arduino-mode fbfa013 091/107: format code |
Date: |
Sun, 29 Aug 2021 10:58:22 -0400 (EDT) |
branch: elpa/arduino-mode
commit fbfa0134e488e101ad25780a95ff848981dd1d91
Author: stardiviner <numbchild@gmail.com>
Commit: stardiviner <numbchild@gmail.com>
format code
---
arduino-mode.el | 12 +++----
ede-arduino.el | 107 ++++++++++++++++++++------------------------------------
2 files changed, 44 insertions(+), 75 deletions(-)
diff --git a/arduino-mode.el b/arduino-mode.el
index f884479..1399ab8 100644
--- a/arduino-mode.el
+++ b/arduino-mode.el
@@ -71,8 +71,7 @@
"break" "continue" "do" "while" "else" "for" "goto" "if"
"return" "switch" "case"
;; Utilities
- "PROGMEM"
- )
+ "PROGMEM")
(c-lang-const c-primitive-type-kwds)))
(c-lang-defconst c-constant-kwds
@@ -113,8 +112,7 @@
;; Keyboard
"write" "press" "release" "releaseAll"
;; Mouse
- "click" "move" "isPressed"
- )
+ "click" "move" "isPressed")
(c-lang-const c-simple-stmt-kwds)))
(c-lang-defconst c-primary-expr-kwds
@@ -287,7 +285,8 @@ Value is a symbol. The possible values are the symbols in
the
nil nil
"arduino:sam")))
(start-process
- "arduino-install-boards" "*arduino-install-boards*"
+ "arduino-install-boards"
+ "*arduino-install-boards*"
arduino-executable "--install-boards" board))
(defun arduino-install-library (library)
@@ -297,7 +296,8 @@ Value is a symbol. The possible values are the symbols in
the
nil nil
"Bridge:1.0.0")))
(start-process
- "arduino-install-library" "*arduino-install-library*"
+ "arduino-install-library"
+ "*arduino-install-library*"
arduino-executable "--install-library" library))
(require 'term)
diff --git a/ede-arduino.el b/ede-arduino.el
index 57e34c4..d0e34dc 100644
--- a/ede-arduino.el
+++ b/ede-arduino.el
@@ -78,12 +78,10 @@ Consider expanding this at some later date."
;; without expansion the comparison in the next step fails
;; for relative files
(dir (expand-file-name dir))
- (sketchroot (and prefs (oref prefs sketchbook)))
- )
- (when (and
- sketchroot
- (< (length sketchroot) (length dir))
- (string= sketchroot (substring dir 0 (length sketchroot))))
+ (sketchroot (and prefs (oref prefs sketchbook))))
+ (when (and sketchroot
+ (< (length sketchroot) (length dir))
+ (string= sketchroot (substring dir 0 (length sketchroot))))
;; The subdir in DIR just below sketchroot is always the root of this
;; project.
(let* ((dirtail (substring dir (length sketchroot)))
@@ -129,17 +127,17 @@ ROOTPROJ is nil, sinc there is only one project for a
directory tree."
(pde (expand-file-name (concat name ".pde") root)))
(when (not (file-exists-p pde))
(setq pde (expand-file-name (concat name ".ino") root)))
- (setq proj (ede-arduino-project
- name
- :name name
- :directory (file-name-as-directory dir)
- :file pde
- :targets nil)))
+ (setq proj (ede-arduino-project name
+ :name name
+ :directory
(file-name-as-directory dir)
+ :file pde
+ :targets nil)))
(ede-add-project-to-global-list proj))
(message "Project loading/creation failed")))))
;;;###autoload
(require 'ede/auto) ; for `ede-project-autoload'
+
;;;###autoload
(add-to-list
'ede-project-class-files
@@ -180,8 +178,7 @@ ROOTPROJ is nil, sinc there is only one project for a
directory tree."
[ "Version Control Status" ede-vc-project-directory ede-object ]
"--"
[ "Rescan Project Files" ede-rescan-toplevel t ]
- ))
- )
+ )))
"EDE Arduino project.")
;;; TARGET MANAGEMENT
@@ -199,8 +196,7 @@ If one doesn't exist, create a new one for this directory."
(directory-file-name dir))
:path dir
:source nil))
- (object-add-to-list proj :targets ans)
- )
+ (object-add-to-list proj :targets ans))
ans))
;;; COMMAND SUPPORT
@@ -223,8 +219,7 @@ Uses `serial-term'."
(serial-term (oref prefs port) 9600)
;; Always go to line mode, as arduino serial isn't typically used
;; for input, just debugging output.
- (term-line-mode)
- ))
+ (term-line-mode)))
(cl-defmethod project-compile-project ((proj ede-arduino-project) &optional
command)
"Compile the entire current project PROJ.
@@ -232,8 +227,7 @@ Argument COMMAND is the command to use when compiling."
;; 1) Create the mini-makefile.
(ede-arduino-create-makefile proj)
;; 2) Call MAKE
- (compile (or command ede-arduino-make-command))
- )
+ (compile (or command ede-arduino-make-command)))
(cl-defmethod project-compile-target ((obj ede-arduino-target) &optional
command)
"Compile the current target OBJ.
@@ -254,17 +248,13 @@ Argument COMMAND is the command to use for compiling the
target."
(ede-arduino-find-install)))
(table (when (and wiring_h (file-exists-p wiring_h))
(semanticdb-file-table-object wiring_h)))
- (filemap '( ("HIGH" . "0x1")
- ("LOW" . "0x0")
- ))
- )
+ (filemap '(("HIGH" . "0x1")
+ ("LOW" . "0x0"))))
(when table
(when (semanticdb-needs-refresh-p table)
(semanticdb-refresh-table table))
- (setq filemap (append filemap (oref table lexical-table)))
- )
- filemap
- ))
+ (setq filemap (append filemap (oref table lexical-table))))
+ filemap))
(cl-defmethod ede-system-include-path ((this ede-arduino-target))
"Get the system include path used by project THIS."
@@ -306,9 +296,8 @@ Argument COMMAND is the command to use for compiling the
target."
(set-buffer (setq buff-to-kill (find-file-noselect mfilename)))
(save-excursion
(goto-char (point-min))
- (if (and
- (not (eobp))
- (not (looking-at "# Automatically Generated \\w+ by EDE.")))
+ (if (and (not (eobp))
+ (not (looking-at "# Automatically Generated \\w+ by EDE.")))
(if (not (y-or-n-p (format "Really replace %s? " mfilename)))
(error "Not replacing Makefile"))
(message "Replaced EDE Makefile"))
@@ -326,11 +315,9 @@ Argument COMMAND is the command to use for compiling the
target."
"AVRDUDE_ARD_BAUDRATE" (or ede-arduino-avrdude-baudrate (oref board
speed))
"AVRDUDE_ARD_PROGRAMMER" (oref board protocol)
"ARDUINO_MK" (ede-arduino-Arduino.mk)
- "ARDUINO_HOME" (ede-arduino-find-install)
- ))
+ "ARDUINO_HOME" (ede-arduino-find-install)))
(save-buffer)
- (when (not orig-buffer) (kill-buffer (current-buffer)))
- )))
+ (when (not orig-buffer) (kill-buffer (current-buffer))))))
;;; Arduino Sketch Code Inspector
;;
@@ -342,13 +329,11 @@ Argument COMMAND is the command to use for compiling the
target."
(let* ((libs nil)
(sketch (ede-arduino-guess-sketch))
(sketch-buffer (find-file-noselect sketch))
- (arduino-libraries
- (save-current-buffer
- (set-buffer sketch-buffer)
- (if (boundp 'arduino-libraries)
- arduino-libraries
- nil)))
- )
+ (arduino-libraries (save-current-buffer
+ (set-buffer sketch-buffer)
+ (if (boundp 'arduino-libraries)
+ arduino-libraries
+ nil))))
(cond
(arduino-libraries
(dolist (lib (split-string arduino-libraries))
@@ -374,8 +359,7 @@ Argument COMMAND is the command to use for compiling the
target."
(when (file-exists-p util)
(push (concat lib "/utility") libs))
;; Push real lib after the utility
- (push lib libs)
- )))))
+ (push lib libs))))))
(when (not orig-buffer) (kill-buffer buff)))))
libs))
@@ -383,8 +367,7 @@ Argument COMMAND is the command to use for compiling the
target."
"Return the file that is the core of the current project sketch."
(let* ((proj ede-object-project)
(sketch (expand-file-name (concat (oref proj name) ".pde")
- (oref proj directory)))
- )
+ (oref proj directory))))
(if (file-exists-p sketch)
sketch
(setq sketch (expand-file-name (concat (oref proj name) ".ino")
@@ -404,8 +387,7 @@ Argument COMMAND is the command to use for compiling the
target."
(board :initform "uno")
(port :initform "/dev/ttyUSB1")
(sketchbook :initform "~/arduino")
- (boardobj :initform nil)
- )
+ (boardobj :initform nil))
"Class containing arduino preferences.")
(defvar ede-arduino-active-prefs nil
@@ -440,13 +422,11 @@ Emacs back to the Arduino IDE."
(when (or (not (oref ede-arduino-active-prefs timestamp))
(/= (or (oref ede-arduino-active-prefs prefssize) 0) size)
(not (equal (oref ede-arduino-active-prefs timestamp) mod)))
-
(when (not buff)
(setq buff (find-file-noselect prefsfile)
kill t))
(with-current-buffer buff
(save-excursion
-
(goto-char (point-min))
(when (not (re-search-forward "^serial.port=" nil t))
(error "Cannot find serial.port from the arduino preferences"))
@@ -469,13 +449,9 @@ Emacs back to the Arduino IDE."
(when kill (kill-buffer buff))
- (oset ede-arduino-active-prefs boardobj
- (ede-arduino-board-data board))
-
+ (oset ede-arduino-active-prefs boardobj (ede-arduino-board-data
board))
(oset ede-arduino-active-prefs prefssize size)
- (oset ede-arduino-active-prefs timestamp mod)
-
- )))))
+ (oset ede-arduino-active-prefs timestamp mod))))))
;;; Arduino Intuition
;;
@@ -502,13 +478,11 @@ This is also where Arduino.mk will be found."
"Launch the arduino IDE."
(interactive)
(let ((b (get-buffer-create "*Arduino IDE*"))
- (cd default-directory)
- )
+ (cd default-directory))
(with-current-buffer b
(setq default-directory cd)
(erase-buffer))
- (apply 'start-process "arduino" b ede-arduino-arduino-command nil)
- ))
+ (apply 'start-process "arduino" b ede-arduino-arduino-command nil)))
(defun ede-arduino-find-install (&optional full-path)
"Return the `FULL-PATH' where arduino IDE code is installed.
@@ -517,8 +491,7 @@ If `full-path' is set return a full path including
container prefix,
if configured"
(cond
((and ede-arduino-appdir
- (file-exists-p
- (concat ede-arduino-container-prefix ede-arduino-appdir)))
+ (file-exists-p (concat ede-arduino-container-prefix
ede-arduino-appdir)))
(if full-path
(concat ede-arduino-container-prefix ede-arduino-appdir)
ede-arduino-appdir))
@@ -567,8 +540,7 @@ if configured"
(with-current-buffer buff
(save-excursion
(goto-char (point-min))
- (buffer-substring-no-properties (point) (point-at-eol))
- ))
+ (buffer-substring-no-properties (point) (point-at-eol))))
(if kill (kill-buffer buff))))))
(defun ede-arduino-boards.txt ()
@@ -614,8 +586,7 @@ If LIBRARY is not provided as an argument, just return the
library directory."
(core :initarg :core
:initform nil
:documentation
- "The core name for this board.")
- )
+ "The core name for this board."))
"Class for containing key aspect of the arduino board.")
(defun ede-arduino-board-data (boardname)
@@ -637,7 +608,6 @@ Data returned is the intputs needed for the Makefile."
(with-current-buffer buff
(save-excursion
-
(goto-char (point-min))
(when (not (re-search-forward (concat "^" boardname ".name=") nil t))
(error "Cannot find %s.name looking up board" boardname))
@@ -682,8 +652,7 @@ Data returned is the intputs needed for the Makefile."
:maximum-size size
:mcu mcu
:f_cpu f_cpu
- :core core)
- ))))
+ :core core)))))
(provide 'ede-arduino)
- [nongnu] elpa/arduino-mode d47364b 088/107: Fix typo, (continued)
- [nongnu] elpa/arduino-mode d47364b 088/107: Fix typo, ELPA Syncer, 2021/08/29
- [nongnu] elpa/arduino-mode 2160dcb 056/107: put keybinding definitions in arduino-mode-map, ELPA Syncer, 2021/08/29
- [nongnu] elpa/arduino-mode e39cb1c 079/107: Merge branch 'hotfix/spinner-dependency', ELPA Syncer, 2021/08/29
- [nongnu] elpa/arduino-mode 23ae47c 082/107: update README, ELPA Syncer, 2021/08/29
- [nongnu] elpa/arduino-mode 4367333 092/107: autoload classes to fix unknown slot warnings when compilation, ELPA Syncer, 2021/08/29
- [nongnu] elpa/arduino-mode 07c3421 103/107: Mention flycheck-arduino usage in README, ELPA Syncer, 2021/08/29
- [nongnu] elpa/arduino-mode 969b49e 104/107: Add flycheck-arduino metadata, ELPA Syncer, 2021/08/29
- [nongnu] elpa/arduino-mode 74e7e56 093/107: auto enable flycheck in project, ELPA Syncer, 2021/08/29
- [nongnu] elpa/arduino-mode b1e2645 101/107: bump version to v1.3.0, ELPA Syncer, 2021/08/29
- [nongnu] elpa/arduino-mode d7c8781 107/107: Mention ob-arduino.el usage in README, ELPA Syncer, 2021/08/29
- [nongnu] elpa/arduino-mode fbfa013 091/107: format code,
ELPA Syncer <=
- [nongnu] elpa/arduino-mode a2997e2 094/107: fix Arduino default sketchbook directory, ELPA Syncer, 2021/08/29
- [nongnu] elpa/arduino-mode cf0eb26 099/107: Emacs 28.1 deprecated easy-menu-add function, ELPA Syncer, 2021/08/29