Re: [Freeipmi-users] Supermicro X9SCL-F ipmi-dcmi Bad completion code

[Albert Chu]

It's possible your system doesn't support DCMI, not all Supermicro
systems do.

Can you run w/ --get-dcmi-capability-info?  If it reports that DCMI is
supported.  If you still get bad completion code, can you run w/
--debug.

Al

On Thu, 2012-11-22 at 12:31 +0800, Ihsan Junaidi Ibrahim wrote:
> Hi folks,
> 
> I'm trying to obtain my system power utilization via the command ipmi-dcmi
> but I kept getting bad completion code error.
> 
> nsv02-kul # ipmi-dcmi -W supermicro20
> --get-enhanced-system-power-statistics
> ipmi_cmd_dcmi_get_dcmi_capability_info_enhanced_system_power_statistics_attributes:
> bad completion code
> 
> nsv02-kul # ipmi-dcmi -W supermicro20 --get-system-power-statistics
> ipmi_cmd_dcmi_get_power_reading: bad completion code
> 
> Omitting the -W workaround flag did not seem to make a difference.
> 
> Other reading seems OK.
> 
> nsv02-kul # ipmi-sensors
> ID   | Name          | Type              | Reading    | Units | Event
> 4    | System Temp   | Temperature       | 24.00      | C     | 'OK'
> 71   | CPU Temp      | OEM Reserved      | N/A        | N/A   | 'OEM Event
> = 0000h'
> 138  | FAN 1         | Fan               | 9045.00    | RPM   | 'OK'
> 205  | FAN 2         | Fan               | 9990.00    | RPM   | 'OK'
> 272  | FAN 3         | Fan               | 10125.00   | RPM   | 'OK'
> 339  | FAN 4         | Fan               | N/A        | RPM   | N/A
> 406  | FAN A         | Fan               | 9045.00    | RPM   | 'OK'
> 473  | Vcore         | Voltage           | 0.99       | V     | 'OK'
> 540  | 3.3VCC        | Voltage           | 3.39       | V     | 'OK'
> 607  | 12V           | Voltage           | 12.24      | V     | 'OK'
> 674  | VDIMM         | Voltage           | 1.54       | V     | 'OK'
> 741  | 5VCC          | Voltage           | 5.12       | V     | 'OK'
> 808  | -12V          | Voltage           | -12.83     | V     | 'OK'
> 875  | VBAT          | Voltage           | 3.14       | V     | 'OK'
> 942  | VSB           | Voltage           | 3.38       | V     | 'OK'
> 1009 | AVCC          | Voltage           | 3.41       | V     | 'OK'
> 1076 | Chassis Intru | Physical Security | N/A        | N/A   | 'OK'
> 1143 | PS Status     | Power Supply      | N/A        | N/A   | 'Presence
> detected'
> 
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory