[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Freeipmi-users] (no subject)
From: |
Ingard Mevåg |
Subject: |
[Freeipmi-users] (no subject) |
Date: |
Thu, 13 Feb 2014 11:03:20 +0100 |
Hi guys
I've been upgrading the firmware on the ipmi module on some
supermicro X8SIU recently and I'm now experiencing problems with the PS
Status sensor. Is there anything I can do to make the sensor detect the
PSUs properly?
Link to board:
http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIU.cfm?IPMI=Y
The latest firmware as of now is version 3.12.
Output from ipmimonitoring:
address@hidden:/usr/local# ./sbin/ipmimonitoring -V
ipmi-sensors - 1.4.0.beta0
address@hidden:/usr/local# ./sbin/ipmimonitoring
ID | Name | Type | State | Reading | Units |
Event
4 | System Temp | Temperature | Nominal | 32.00 | C |
'OK'
71 | CPU Temp | OEM Reserved | N/A | N/A | N/A |
'OEM Event = 0000h'
205 | FAN 2 | Fan | Nominal | 1695.00 | RPM |
'OK'
272 | FAN 3 | Fan | Nominal | 4655.00 | RPM |
'OK'
473 | CPU Vcore | Voltage | Nominal | 0.85 | V |
'OK'
540 | +3.3VCC | Voltage | Nominal | 3.31 | V |
'OK'
607 | +12 V | Voltage | Nominal | 12.19 | V |
'OK'
674 | CPU DIMM | Voltage | Nominal | 1.54 | V |
'OK'
741 | +5 V | Voltage | Nominal | 5.15 | V |
'OK'
808 | -12 V | Voltage | Nominal | -12.48 | V |
'OK'
875 | VBAT | Voltage | Nominal | 3.25 | V |
'OK'
942 | +3.3VSB | Voltage | Nominal | 3.30 | V |
'OK'
1009 | AVCC | Voltage | Nominal | 3.31 | V |
'OK'
1076 | Chassis Intru | Physical Security | Nominal | N/A | N/A |
'OK'
1143 | PS Status | Power Supply | N/A | N/A | N/A |
'Unrecognized Event = 0100h' 'Unrecognized Event = 0200h' 'Unrecognized
Event = 0400h' 'Unrecognized Event = 0800h' 'Unrecognized Event = 1000h'
'Unrecognized Event = 2000h' 'Unrecognized Event = 4000h'
Kind Regards
Ingard
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Freeipmi-users] (no subject),
Ingard Mevåg <=