[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: DataCall -> PC (ISDN, Modem)
From: |
Ekkard Gerlach |
Subject: |
Re: DataCall -> PC (ISDN, Modem) |
Date: |
Fri, 26 Sep 2003 16:44:42 +0200 |
User-agent: |
Mutt/1.4i |
* Aart Koelewijn schrieb:
> Op 2003-09-26 om 01:01 schreef Ekkard Gerlach:
>
> > I own a Nokia 6110/6130.
>
> I use a Nokia 6110 to connect to my home-computer on an ISDN line
>
> A little piece from my log-file:
>
> pppd[7061]: pppd 2.4.1 started by a_ppp, uid 0
> pppd[7061]: Perms of /dev/ttyI8 are ok, no 'mesg n' neccesary.
> pppd[7061]: using channel 19
> pppd[7061]: Using interface ppp0
> pppd[7061]: Connect: ppp0 <--> /dev/ttyI8
> pppd[7061]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MD5>
[...]
>
> As you can see pppd is started, not ipppd, and it is only 1 proces [7061]
> in this case which does not only sent messages but also gets answers, the
> lines with rcvd, the computer connected to the Nokia does not seem to
> react at all in your case.
>
o.k., there was a general misunderstanding. In the first part of
my initial mail I showed how the ipppd reacts to the call if I call
a MSN that the ippp1 observes.
The second part I showed my construction I set up to use mgetty
to observ ANOTHER MSN.
Well, now I know that I have to reboot linux oftenly when using
mgetty. Sometimes it hungs somewhere an mgetty doesn't react.
I reached to connect two PC's X75 by using minicom on the one side
and mgetty on the other (but not by my handy, thats my aim):
/etc/mgetty+sendfax/mgetty.config
port ttyI1
rings 1
init-chat "" ATS0=0 OK AT&E8307936 OK
Wonderful! /var/log/messages:
Sep 26 13:41:43 ama isdnlog: Sep 26 13:41:43 * Call to tei 127 from ? on +49
7xx/8307936, RING (Data)
Sep 26 13:41:43 ama kernel: isdn_net: Incoming call without OAD, assuming '0'
Sep 26 13:41:43 ama kernel: isdn_net: call from 0 -> 0 8307936 ignored
Sep 26 13:41:43 ama kernel: isdn_tty: Incoming call without OAD, assuming '0'
Sep 26 13:41:43 ama kernel: isdn_tty: call from 0, -> RING on ttyI1
Sep 26 13:41:43 ama isdnlog: Sep 26 13:41:43 Call to tei 120 from ? on +49
7xx/8307936, Karlsruhe C$
Sep 26 13:41:44 ama isdnlog: Sep 26 13:41:44 tei 121 calling ? with ? Time:Fri
Sep 26 15:41:00 2003
Sep 26 13:41:44 ama isdnlog: Sep 26 13:41:44 tei 121 calling ? with ? CONNECT
And now that's what obscure: Making a data-call from my 6130-Handy
to the same MSN (nothing changes on the other PC!) the other
PC irgnores the call:
Sep 26 13:44:27 ama isdnlog: Sep 26 13:44:27 * Call to tei 127 from +49
178/7602986,
Deutschland
Mobilfunk E1/Deutschland Mo on +49 7xx/8307936, Karlsruhe RING (Data)
Sep 26 13:44:27 ama kernel: isdn_net: call from 1787602xxx -> 0 8307936 ignored
Sep 26 13:44:27 ama kernel: isdn_tty: call from 1787602xxx -> 8307936 ignored
Sep 26 13:44:30 ama isdnlog: Sep 26 13:44:30 * Call to tei 127 from +49
178/7602xxx,
Deutschland
Mobilfunk E1/Deutschland Mo on +49 7xx/8307936, Karlsruhe RING (Data)
Sep 26 13:44:30 ama kernel: isdn_net: call from 1787602xxx -> 0 8307936 ignored
Sep 26 13:44:30 ama kernel: isdn_tty: call from 1787602xxx -> 8307936 ignored
Sep 26 13:45:26 ama isdnlog: Sep 26 13:45:26 Call to tei 127 from +49
178/7602xxx,
Deutschland
Mobilfunk E1/Deutschland Mo on +49 7xx/8307936, Karlsruhe HANGUP (Timeout)
WHY???
I made the the test to configure mgetty.config like
described in
http://mail.nongnu.org/archive/html/gnokii-users/2002-07/msg00165.html
pointed out in the Doku of gnokii-packet:
port ttyI1
rings 1
data-only y
init-chat "" ATZ OK AT&E8307937 OK AT&R9600S19=197 OK
.. but no success. mgetty irgnores the call if it comes from
my Handy!!
Why?
thx
Ekkard
- DataCall -> PC (ISDN, Modem), Ekkard Gerlach, 2003/09/25
- Re: DataCall -> PC (ISDN, Modem), Aart Koelewijn, 2003/09/26
- Re: DataCall -> PC (ISDN, Modem),
Ekkard Gerlach <=
- Re: DataCall -> PC (ISDN, Modem), Aart Koelewijn, 2003/09/27
- Re: DataCall -> PC (ISDN, Modem), Ekkard Gerlach, 2003/09/27
- Re: DataCall -> PC (ISDN, Modem), Aart Koelewijn, 2003/09/27
- Re: DataCall -> PC (ISDN, Modem), Ekkard Gerlach, 2003/09/28
- Re: DataCall -> PC (ISDN, Modem), Aart Koelewijn, 2003/09/29
- Re: DataCall -> PC (ISDN, Modem), BORBELY Zoltan, 2003/09/29