Re: 3510i: Supported or not?

[Stuart Moore]

More or less the same results - see file.

Pawel Kot wrote:
> On Wed, 21 Jan 2004, Stuart Moore wrote:
>
>
> > I've attatched output. As I say, it's quite possible I've done something
> > stupid,or that the cable doesn't work
>
>
> Try connection = dau9p
>
> pkot
GNOKII Version 0.5.9
Opened configuration file /home/stumo/.gnokiirc
Added new section global
Adding key/value port//dev/ttyS0
Adding key/value model/3510i
Adding key/value initlength/default
Adding key/value connection/dau9p
Adding key/value bindir//usr/sbin
Adding key/value use_locking/yes
Adding key/value serial_baudrate/19200
Adding key/value smsc_timeout/10
Added new section connect_script
Adding key/value TELEPHONE/12345678
Added new section disconnect_script
phone instance config:
model: 3510i
port_device: /dev/ttyS0
connection_type: 1
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script: 
disconnect_script: 
Connecting
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |