gnokii-nokia 6100-dku 5 in windows xp

[Selvaraju s]

Dear Sir/Madam,
   I installed DKU-5 cable in Windows Xp and connected my 6100. then i tried 
the following commands 

D:\downloads\Installers\gnokii\gnokii-0.6.0-win32\bin>gnokii --identify

GNOKII Version 0.6.0
phone instance config:
model: 6100
port_device: COM6
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
Connecting
Serial device: opening device COM6
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |

IO Pending[Received Ack of type 1b, seq: 80]
[Sending Ack of type 1b, seq: 3]
Message received: 0x1b / 0x0032
01 31 00 08 00 01 58 2c 00 26 56 20 30 35 2e 35 |  1    X, &V 05.5
31 20 20 20 20 20 0a 32 37 2d 30 32 2d 30 34 0a | 1      27-02-04
4e 50 4c 2d 32 0a 28 63 29 20 4e 6f 6b 0a 57 00 | NPL-2 (c) Nok W
00 00                                           |
Received message type 1b
model length: 5
Received model NPL-2
Sorry, this function is known to break your phone (Nokia 6100). Refusing to
do it. You may try to use AT driver. If you are brave enough to test the
driver anyway, please contact developers at address@hidden
Telephone interface init failed: Command called isn't implemented in model.
Quitting.
Serial device: closing device

D:\downloads\Installers\gnokii\gnokii-0.6.0-win32\bin>gnokii --sendsms +91943300
0486 "abcd"
GNOKII Version 0.6.0
phone instance config:
model: 6100
port_device: COM6
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
Connecting
Serial device: opening device COM6
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |

IO Pending[Received Ack of type 1b, seq: 80]
[Sending Ack of type 1b, seq: 4]
Message received: 0x1b / 0x0032
01 31 00 08 00 01 58 2c 00 26 56 20 30 35 2e 35 |  1    X, &V 05.5
31 20 20 20 20 20 0a 32 37 2d 30 32 2d 30 34 0a | 1      27-02-04
4e 50 4c 2d 32 0a 28 63 29 20 4e 6f 6b 0a 57 00 | NPL-2 (c) Nok W
00 00                                           |
Received message type 1b
model length: 5
Received model NPL-2
Sorry, this function is known to break your phone (Nokia 6100). Refusing to
do it. You may try to use AT driver. If you are brave enough to test the
driver anyway, please contact developers at address@hidden
Telephone interface init failed: Command called isn't implemented in model.
Quitting.
Serial device: closing device

D:\downloads\Installers\gnokii\gnokii-0.6.0-win32\bin>


selvaraju.s
BSNL,INDIA


SELVARAJU.S

033-24315866/5(residence) b4 9.00 AM after 9.00PM

033-22255841/2 (office) between 10.00 AM to 7.00PM
MAKE THE WORLD 
PEACE AND HAPPY