gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

help required to connect gnokii with nokia6100 by DKU-5 cable on slackwa


From: BOBBY
Subject: help required to connect gnokii with nokia6100 by DKU-5 cable on slackware 10.1
Date: Fri, 24 Jun 2005 14:04:19 +0100 (BST)

Hi,
I installed playsms-0.7.1 and gnokii-current on my
machine.
Now, when i used the following instruction i saw the
following error i.e.
address@hidden:~# gnokii --identify
GNOKII Version 20050623
LOG: debug mask is 0x1
LOG: xdebug mask is 0x1
Lockfile /var/lock/LCK..ttyUSB0 is stale. Overriding
it..
phone instance config:
model: 6100
port_device: /dev/ttyUSB0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
^[[BSerial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready
Serial write: transmitter busy, waiting
Serial write: transmitter ready

The above line "Serial write: transmitter ready" will
continue and at the end i received
IMEI         : (unknown)
Manufacturer : Nokia
Model        : (unknown)
Revision     : (unknown)
Serial device: closing device

Now, anyone can tell me what i do? What i change into
my .gnokiirc file so that this problem will be solve. 
I will give u some more details... about my fone and
cable.
Mobile fone used for gnokii = Nokia 6100
Cable used for connection = DKU-5
Linux version = Slackware 10.1 with kernel = 2.4.xx
Also, i saw in the kde-control center some more
settings i.e.

USB-Serial Controller
Manufacturer: Prolific Technology Inc.


Class        0 ((Defined at Interface level))
Subclass     0
Protocol     0
USB Version  1.10
Vendor ID 0x67b (Prolific Technology, Inc.)
Product ID   0x2303 (PL2303 Serial Port)
Revision     3.00
Speed        12 Mbit/s
Channels      0
Max. Packet Size    0


 
Regards,
Bobby.


        
        
                
___________________________________________________________ 
Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail 
http://uk.messenger.yahoo.com




reply via email to

[Prev in Thread] Current Thread [Next in Thread]