Re: TMob 6101B rip image files

[Bob Dodds]

Pawel Kot wrote:

Hi,

On 1/11/06, Bob Dodds <address@hidden> wrote:
  

 model: 6510
 port_device: /dev/ttyACM0
    

These two settings are incompatible. You can't use cdc_acm driver for
FBUS. You should use something like /dev/ttyUSB0

take care,
pkot
--
Pawel Kot
http://www.gnokii.org/

Thanks.

ls /dev/tty* /dev/*usb* /dev/*USB*

/dev/tty    /dev/ttyp1  /dev/ttyp3  /dev/ttyp5  /dev/ttyp7  /dev/ttyp9
/dev/ttypb  /dev/ttypd  /dev/ttypf /dev/ttyp0  /dev/ttyp2  /dev/ttyp4
/dev/ttyp6  /dev/ttyp8  /dev/ttypa  /dev/ttypc  /dev/ttype

/dev/usbdev1.1 /dev/usbdev1.6 /dev/usbdev2.1  /dev/usbdev3.1
 /dev/usbdev3.2

.../dev/usbdev1.6 exists when /dev/ttyACM0 exists, which is
when the phone is connected via usb cable.

linux 2.6.15

/usr/src/gnokii/gnokii/gnokii --getfiledetailsbyid
GNOKII Version 0.6.10
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
phone instance config:
model: 6510
port_device: /dev/usbdev1.6
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 1
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/usbdev1.6
Gnokii serial_open: tcgetattr: Inappropriate ioctl for device
Couldn't open FBUS device: Inappropriate ioctl for device
Error in link initialisation: 1
Serial device: opening device /dev/usbdev1.6
Gnokii serial_open: tcgetattr: Inappropriate ioctl for device
Couldn't open FBUS device: Inappropriate ioctl for device
Error in link initialisation: 1
Error in link initialisation: 1
Telephone interface init failed: Command failed.
Quitting.
Serial device: closing device