gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Nokia 3220 + Freebsd 6.1 + DKU-5


From: Ernesto Quiñones
Subject: Nokia 3220 + Freebsd 6.1 + DKU-5
Date: Fri, 21 Jul 2006 00:47:42 -0500

Hello friends

I have a Nokia 3220 with DKU-5 connection.

My freeBSD 6.1 have load this modules
ucomm, uplcom and umodem

my DKU-5 is view by freebsd as :

dmesg:
ucom0: Prolific Technology Inc. USB-Serial Controller C, rev 1.10/4.00, addr 2

the device is /dev/cuaU0 or /dev/ttyU0  (ucom0 don't exists since 6.0 release)

when I probe the conexion have this message (to much large):

GNOKII Version 0.6.12
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
phone instance config:
model: 6100
port_device: /dev/cuaU0
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/cuaU0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Serial device: opening device /dev/cuaU0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41                                  |     A
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
IMEI         : (unknown)
Manufacturer : Nokia
Model        : (unknown)
Revision     : (unknown)
Serial device: closing device

my configuration is:

port = /dev/cuaU0 (or ttyU0)
model = 6100  (or 6510, I try with this two models)
initlength = default
connection = serial (or dlr3p with this two types i have the same answer)
use_locking = no
serial_baudrate = 19200
smsc_timeout = 10

the problem is when I run xgnokii, the conecction is not established

...
.....
......
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block: exiting the retry loop
Serial device: closing device

and the software down!!

any body can help me please? should be try with another model? or connection?


pd. sorry my bad english
--
Inscribete en las listas de APESOL
http://listas.apesol.org/mailman/listinfo

Visita
http://www.eqsoft.net
Manuales, noticias, foros, etc.




reply via email to

[Prev in Thread] Current Thread [Next in Thread]