Re: gnokii problem with osx install and nokia 6020

[bernardo amorim]

hi there its as follows:
".gnokiirc" contents:
# This is a sample ~/.gnokiirc file.  Copy it into your
# home directory and name it .gnokiirc.
#

[global]

# Set port to the physical serial port used to connect to your phone
#port = /dev/ttyS0
#port = /dev/ttySA2
port = /dev/tty.usbmodem1B11

# Set model to the model number of your phone
model = 6510

# Initlength controls the number of characters sent to the
# phone during initialisation.  You can either set it to
# the word "default" or a positive integer.
#
# You can try setting this value if you want to connect
# to the phone quicker.  If you've never noticed the
# connection to be slow, it is suggested that you
# leave this alone.  Read the initialisation code in fbus-xxxx
# to understand what this changes if you're curious.
initlength = default

# The type of the connection, for IR set this to infrared
connection = serial
#connection = infrared
#connection = dlr3p

# Set bindir to point to the location of the various gnokii binaries.
# In particular ensure that mgnokiidev is in this location, with
# permissions 4754, owned by root, group gnokii.  Ensure you
# are in the gnokii group and that the group exists...
bindir = /sw/sbin/

use_locking = no

[logging]
debug = off

-----------------------------------------
the debug log:
------------------
GNOKII Version 0.6.4
LOG: debug mask is 0x1
phone instance config:
model: 6510
port_device: /dev/tty.usbmodem1B11
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script: 
disconnect_script: 
rfcomm_cn: 1
Connecting
Serial device: opening device /dev/tty.usbmodem1B11
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Serial device: opening device /dev/tty.usbmodem1B11
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Serial device: opening device /dev/tty.usbmodem1B11
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41                                  |     A           
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
IMEI         : (unknown)
Manufacturer : Nokia
Model        : (unknown)
Revision     : (unknown)
Serial device: closing device

On 2/2/07, rishi pathak <address@hidden> wrote:

Can you post full details and debug messages

On 2/2/07, bernardo amorim <address@hidden > wrote:

---------- Forwarded message ----------
From: bernardo amorim <address@hidden>
Date: Feb 1, 2007 2:05 PM
Subject: Re: can not get gnokii to work
To: "Discussion forum for gnokii users." <address@hidden >

well, i have the same problem, except my phone is a nokia 6020 and my macosx installation of gnokii wont recognize it. i am using a ca 42 cable and i have serial in the conectino mode. is seems to me that the problem is from the computer side. by the way its a powerbook g4
please help


--
Raging_Synth
Bernardo Gomes de Amorim - 2006

Confidencialidade de Correio electrónico
Este email destina-se exclusivamente à(s) pessoa(s) a quem é dirigido e não deverá em caso algum ser reencaminhado ou reutilizado para nenhum fim a não ser aquele para o qual foi criado. Aplicável tambem aos attachments.

_______________________________________________
gnokii-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/gnokii-users

_______________________________________________
gnokii-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/gnokii-users

-- 
Raging_Synth
Bernardo Gomes de Amorim - 2006

Confidencialidade de Correio electrónico
Este email destina-se exclusivamente à(s) pessoa(s) a quem é dirigido e não deverá em caso algum ser reencaminhado ou reutilizado para nenhum fim a não ser aquele para o qual foi criado. Aplicável tambem aos attachments.