Re: reading contacts from 6230

[Baurzhan Ismagulov]

Hello Pawel,

Wow, that was fast 8) !

On Tue, Feb 27, 2007 at 12:09:01AM +0100, Pawel Kot wrote:
> >The problem reading additional numbers is resolved, but one entry still
> >gets corrupted.
> 
> How corrupted?

Message received: 0x03 / 0x0116
01 6e 00 08 00 01 01 00 00 10 00 05 00 01 00 00 |  n
00 02 00 00 00 06 07 00 00 2c 01 26 00 xx 00 xx |          , & x x
00 xx 00 xx 00 20 00 xx 00 xx 00 xx 00 xx 00 xx |  x x   x x x x x
00 20 00 xx 00 xx 00 xx 00 xx 00 xx 00 xx 00 xx |    x x x x x x x
00 00 0b 00 00 28 02 02 00 00 00 1c 00 2b 00 xx |      (       + x
00 xx 00 xx 00 xx 00 xx 00 xx 00 xx 00 xx 00 xx |  x x x x x x x x
00 xx 00 xx 00 xx 00 00 00 00 0b 00 00 28 03 03 |  x x x       (
00 00 00 1c 00 2b 00 xx 00 xx 00 xx 00 xx 00 xx |      + x x x x x
00 xx 00 xx 00 xx 00 xx 00 xx 00 xx 00 xx 00 00 |  x x x x x x x
00 00 0b 00 00 24 04 06 00 00 00 18 00 2b 00 xx |      $       + x
00 xx 00 xx 00 xx 00 xx 00 xx 00 xx 00 xx 00 xx |  x x x x x x x x
00 xx 00 00 00 00 0a 00 00 30 05 28 00 44 00 2e |  x       0 ( D .
00 52 00 2e 00 20 00 32 00 35 00 20 00 53 00 65 |  R .   2 5   S e
00 70 00 74 00 2e 00 20 00 31 00 39 00 37 00 34 |  p t .   1 9 7 4
00 20 00 00 00 00 0a 00 00 30 06 2a 00 50 00 61 |          0 * P a
00 74 00 72 00 69 00 63 00 05 28 00 44 00 2e 00 |  t r i c  ( D .
52 00 2e 00 20 00 32 00 35 00 20 00 53 00 65 00 | R .   2 5   S e
70 00 74 00 2e 00                               | p t .
Received message type 03
Received phonebook info
Parts: 6
[0] Blockstart: 0x07
   Name: xxxx xxxxx xxxxxxx
[1] Blockstart: 0x0b
   Type: 2 (02)
   Number: +xxxxxxxxxxxx
[2] Blockstart: 0x0b
   Type: 3 (03)
   Number: +xxxxxxxxxxxx
[3] Blockstart: 0x0b
   Type: 6 (06)
   Number: +xxxxxxxxxx
[4] Blockstart: 0x0a
   Type: 10 (0a)
   Text: D.R. 25 Sept. 1974 
[5] Blockstart: 0x0a
   Type: 10 (0a)
   Text: Patric⠀䐀⸀刀⸀ ㈀㔀 匀攀瀀琀⸀


See the "Patric" entry? On the phone it reads "Patrick D.R. 16 Oct.".
The phone is Nokia 6230, RH12_28_-, V 05.24. Is the message shown the
raw data we receive from the phone, or is it the result of decoding by
gnokii? If it's the latter, where is it decoded?


> Well there are few kind of problems. First is that it would be damn
> slow.

I see, but trying various settings is not faster :) .


> Second is that ordering is not neceserily the same with different
> drivers, so you are not guarantee to have the same result for the same
> command with different drivers.

Uh, could you perhaps give a small example?

My point was, after we somehow identify the phone at startup, we use a
kind of a hard-coded translation table to choose the best protocol under
a given connection, and use that protocol for that session. At this
stage we can inform the user that specifying the model "xxx" in the
config file will make the startup faster (and, perhaps, other connection
possibilities).

My problem is, trying various settings is very time-consuming. Wiki
content is very good, but one has to read it :) . I would prefer coding
it once, and forgetting about it. BTW, could you please give me write
access to the wiki? My user name should be "ibr".


With kind regards,
-- 
Baurzhan Ismagulov
http://www.kz-easy.com/