Dialing failed: The given memory location is invalid.

[Pat Carroll]

Hi folks,

this is essentially a repost but the previous post had an unhelpful subject line.
I'm hoping this one get's more results.

Here it is:

Hi gnokii people,

Gnokii is great and if I get this last issue resolved, I'll be over the moon.

I'm trying out gnokki 0.6.22 using the Command Line Interface on Ubuntu server 8.04.4 LTS.
I've connected a SonyEricsson K800i using a usb cable.

gnokii --identify works fine

echo "This is a test message" | gnokii --sendsms 0812345678 works fine too - the message is successfully sent.

However, voice dialing fails with Dialing failed: The given memory location is invalid.

Here's my rc file

[global]
port = /dev/ttyACM0
model = AT
connection = serial

[logging]
# where to log the debug output (on: stderr, off: /dev/null)
debug = on
# where to log the rlp debug output (on: stderr, off: /dev/null)
rlpdebug = off
# where to log X debug output (on: stderr, off: /dev/null)
xdebug = off

With debug on, I'm getting the following when trying to dial.

[rog]/home/rog$ gnokii --dialvoice 0812345678
GNOKII Version 0.6.22
LOG: debug mask is 0x1
Config read from file /home/rog/.gnokiirc.
phone instance config:
model = AT
port = /dev/ttyACM0
connection = serial
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 1
sm_retry = 0
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyACM0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ
write: [ATZ<cr>]
read : [ATZ<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000a
02 41 54 5a 0d 0d 0a 4f 4b 0d                   |  ATZ   OK
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1
write: [ATE1<cr>]
read : [ATE1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000b
02 41 54 45 31 0d 0d 0a 4f 4b 0d                |  ATE1   OK
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1
write: [AT+CMEE=1<cr>]
read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x0010
02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d |  AT+CMEE=1   OK
Received message type 00
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d                         | AT+CGMM
write: [AT+CGMM<cr>]
read : [AT+CGMM<cr><cr><lf>AAD-3022031-BV<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0020
02 41 54 2b 43 47 4d 4d 0d 0d 0a 41 41 44 2d 33 |  AT+CGMM   AAD-3
30 32 32 30 33 31 2d 42 56 0d 0a 0d 0a 4f 4b 0d | 022031-BV    OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d                         | AT+CGMI
write: [AT+CGMI<cr>]
read : [AT+CGMI<cr><cr><lf>Sony Ericsson<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x001f
02 41 54 2b 43 47 4d 49 0d 0d 0a 53 6f 6e 79 20 |  AT+CGMI   Sony
45 72 69 63 73 73 6f 6e 0d 0a 0d 0a 4f 4b 0d    | Ericsson    OK
Received message type 06
Message sent: 0x61 / 0x0009
41 54 2b 43 53 43 53 3f 0d                      | AT+CSCS?
write: [AT+CSCS?<cr>]
read : [AT+CSCS?<cr><cr><lf>+CSCS: "GSM"<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x61 / 0x001f
02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 |  AT+CSCS?   +CSC
53 3a 20 22 47 53 4d 22 0d 0a 0d 0a 4f 4b 0d    | S: "GSM"    OK
Received message type 61
Initialisation completed
Message sent: 0x39 / 0x0010
41 54 44 54 30 38 37 32 30 32 37 30 32 39 3b 0d | ATDT0812345678;
write: [ATDT0812345678;<cr>]
read : address@hidden;<cr><cr><lf>+CME ERROR: 21<cr><lf>]
Message received: 0x39 / 0x0022
05 00 15 44 54 30 38 37 32 30 32 37 30 32 39 3b |    DT0812345678;
0d 0d 0a 2b 43 4d 45 20 45 52 52 4f 52 3a 20 32 |    +CME ERROR: 2
31 0d                                           | 1
Received message type 39
Dialing failed: The given memory location is invalid.
Serial device: closing device


Any ideas as to what's wrong and if it can be easily corrected ?

Many thanks,

Pat