RE: Nokia Premicell

[Tristan Drinkwater]

Hi Daniele,

I've tried with both space at the end and beginning without success. I've also 
commented out the coming line above the new line you asked me to add.

Sadly I'm still getting the same error.

Any further thoughts?

Thanks again.

-----Original Message-----
From: address@hidden [mailto:address@hidden On Behalf Of Daniele Forsi
Sent: 02 December 2011 15:55
To: Discussion forum for gnokii users.
Subject: Re: Nokia Premicell

2011/12/2 Tristan Drinkwater <address@hidden>:

> Not sure if I've done it right, but I've edited atnoki.c so it looks like
> this... (note the extra blank space before Nokia string)

you did it right, except the extra space was only at the end of the
string not at the beginning, please retry without it

we're also thinking how to recover from this error at runtime so that
you don't need to modify the sources
--
Daniele Forsi

_______________________________________________
gnokii-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/gnokii-users

________________________________

Micro Peripherals Limited.
Registered Office: Shorten Brook Way, Altham Business Park, Altham,
Accrington, Lancs. BB5 5YJ. Tel: (01282) 776776 Fax: (01282) 858790
Micro Peripherals Limited. Registered in England No. 1511931. VAT No. GB 864 
4387 91

DISCLAIMER:
This e-mail and attachments are confidential and are intended solely for the 
use of the individual to
whom it is addressed. Any views or opinions presented are solely those of the 
author and do not
necessarily represent those of Micro Peripherals Limited.
If you are not the intended recipient, be advised that you have received this 
Email in error and that
any use, dissemination, forwarding, printing, or copying of this Email is 
strictly prohibited. If this
transmission is received in error please notify the sender immediately and 
delete this message from
your E-mail system.
All electronic transmissions to and from Micro Peripherals Ltd are recorded and 
may be monitored.