Re: [gpsd-dev] extension for navdata

[Oleg Roitburd]

Hi,
вт, 30 окт. 2018 г. в 23:13, Gary E. Miller <address@hidden>:

> Nothing can happen in gpsd until those happen.  If you have NMEA 0183
> data for a wind sensor then send it in.  Better yet, include a
> decode patch as well.

Do you need only Wind and Depth? I can only filter the data out of an
NMEA stream. But I can provide complete data with AIS etc.
here is small sample

With Filter:
$WIMWD,282.9,T,281.6,M,4.5,N,2.3,M*56
$WIMWV,111.0,R,5.3,N,A*24
$WIMWV,112.9,T,4.5,N,A*2F
$SDDBT,8.1,f,2.4,M,1.3,F*0B
$SDDPT,2.4,0.4,*79

Without Filter
$SDVLW,,N,556.1,N,1117.2,N,401.5,N*47
$SDVHW,169.9,T,168.6,M,0.0,N,0.0,K*4C
$WIMWD,282.9,T,281.6,M,4.5,N,2.3,M*56
$WIMWV,111.0,R,5.3,N,A*24
$WIMWV,112.9,T,4.5,N,A*2F
$IIXDR,C,,C,AIRTEMP,A,7.3,D,HEEL,A,3.5,D,TRIM,P,,B,BARO,A,27.5,D,RUDDER*1B
$GPGGA,123638,5246.2136,N,00507.0602,E,1,12,0.60,-4,M,46.8,M,,*42
$GPGLC,9960,,,,,,,,,,,,*75
$SDHDG,168.6,,,1.3,E*3E
$GPGLL,5246.2135,N,00507.0600,E,123638,A,A*4E
$GPGSA,A,3,01,08,10,11,14,18,20,22,27,28,32,65,1.10,0.60,1.00*0E
$GPGSV,3,1,12,01,25,264,36,08,79,243,42,10,53,069,34,11,37,280,37*7B
$GPGSV,3,2,12,14,08,137,25,18,51,267,30,20,26,054,38,22,11,212,28*7E
$GPGSV,3,3,12,27,55,143,38,28,17,325,45,32,21,118,38,65,26,171,32*7B
$GPRMC,123638,A,5246.2135,N,00507.0600,E,0.3,85.0,200818,1.3,E,A*2D
$GPVTG,85.0,T,83.7,M,0.3,N,0.5,K,A*24
$GPZDA,123638,20,08,2018,-01,00*68
$SDHDG,168.6,,,1.3,E*3E
$GPAAM,,,,N,*38
$GPAPB,,,,,,,,,,,,,,,N*26
$SDHDG,168.6,,,1.3,E*3E
$GPBOD,,T,,M,,*47
$GPRMB,,,,,,,,,,,,,,N*04
$SDHDG,168.6,,,1.3,E*3E
$GPXTE,,,,,N,N*5E
$SDDBT,8.1,f,2.4,M,1.3,F*0B
$SDDPT,2.4,0.4,*79
$SDHDG,168.6,,,1.3,E*3E
$SDHDG,168.6,,,1.3,E*3E
$SDHDG,168.6,,,1.3,E*3E
!AIVDM,1,1,0,,address@hidden:address@hidden,4*30

Regards
Oleg