[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Guile-commits] GNU Guile branch, stable-2.0, updated. v2.0.6-115-gbd31b
From: |
Mark H Weaver |
Subject: |
[Guile-commits] GNU Guile branch, stable-2.0, updated. v2.0.6-115-gbd31bce |
Date: |
Thu, 29 Nov 2012 18:47:52 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Guile".
http://git.savannah.gnu.org/cgit/guile.git/commit/?id=bd31bce6ac5df7e45d0ec802d9d0738cbc32d9bf
The branch, stable-2.0 has been updated
via bd31bce6ac5df7e45d0ec802d9d0738cbc32d9bf (commit)
from 99b94347f9c93459e2111e9cacbe3632b8041072 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit bd31bce6ac5df7e45d0ec802d9d0738cbc32d9bf
Author: Mark H Weaver <address@hidden>
Date: Wed Nov 28 18:01:35 2012 -0500
Add parse-path-with-ellipsis, and use it for GUILE_LOAD_PATH et al.
* libguile/load.c (scm_ellipsis): New Variable.
(scm_parse_path_with_ellipsis): New procedure.
(scm_init_load): Initialize 'scm_ellipsis'.
(scm_init_load_path): Use 'scm_parse_path_with_ellipsis' to
handle GUILE_LOAD_PATH and GUILE_LOAD_COMPILED_PATH.
* libguile/load.h (scm_parse_path_with_ellipsis): Add prototype.
* doc/ref/guile-invoke.texi (Environment Variables):
doc/ref/api-evaluation.texi (Load Paths): Add documentation.
Correct description of default load path to reflect reality.
Remove 'GUILE_LOAD_PATH' from the concept index; it is already
in the variable index. Add cross references between these two
sections of the manual.
-----------------------------------------------------------------------
Summary of changes:
doc/ref/api-evaluation.texi | 27 ++++++++++++++++++++-------
doc/ref/guile-invoke.texi | 25 ++++++++++++++++---------
libguile/load.c | 35 +++++++++++++++++++++++++++++++++--
libguile/load.h | 1 +
4 files changed, 70 insertions(+), 18 deletions(-)
diff --git a/doc/ref/api-evaluation.texi b/doc/ref/api-evaluation.texi
index 37e41e1..2e5a3d2 100644
--- a/doc/ref/api-evaluation.texi
+++ b/doc/ref/api-evaluation.texi
@@ -838,14 +838,16 @@ The procedure in the previous section look for Scheme
code in the file
system at specific location. Guile also has some procedures to search
the load path for code.
address@hidden @env{GUILE_LOAD_PATH}
@defvar %load-path
List of directories which should be searched for Scheme modules and
-libraries. @code{%load-path} is initialized when Guile starts up to
address@hidden(list (%site-dir) (%library-dir) (%package-data-dir))}, prepended
-with the contents of the @env{GUILE_LOAD_PATH} environment variable, if
-it is set. @xref{Build Config}, for more on @code{%site-dir} and
-related procedures.
+libraries. When Guile starts up, @code{%load-path} is initialized to
+the default load path @code{(list (%library-dir) (%site-dir)
+(%global-site-dir) (%package-data-dir))}. The @env{GUILE_LOAD_PATH}
+environment variable can be used to prepend or append additional
+directories (@pxref{Environment Variables}).
+
address@hidden Config}, for more on @code{%site-dir} and related
+procedures.
@end defvar
@deffn {Scheme Procedure} load-from-path filename
@@ -913,7 +915,9 @@ using @code{load-compiled}.
@defvar %load-compiled-path
Like @code{%load-path}, but for compiled files. By default, this path
has two entries: one for compiled files from Guile itself, and one for
-site packages.
+site packages. The @env{GUILE_LOAD_COMPILED_PATH} environment variable
+can be used to prepend or append additional directories
+(@pxref{Environment Variables}).
@end defvar
When @code{primitive-load-path} searches the @code{%load-compiled-path}
@@ -943,6 +947,15 @@ a list and return the resulting list with @var{tail}
appended. If
@var{path} is @code{#f}, @var{tail} is returned.
@end deffn
address@hidden {Scheme Procedure} parse-path-with-ellipsis path base
address@hidden {C Function} scm_parse_path_with_ellipsis (path, base)
+Parse @var{path}, which is expected to be a colon-separated string, into
+a list and return the resulting list with @var{base} (a list) spliced in
+place of the @code{...} path component, if present, or else @var{base}
+is added to the end. If @var{path} is @code{#f}, @var{base} is
+returned.
address@hidden deffn
+
@deffn {Scheme Procedure} search-path path filename [extensions
[require-exts?]]
@deffnx {C Function} scm_search_path (path, filename, rest)
Search @var{path} for a directory containing a file named
diff --git a/doc/ref/guile-invoke.texi b/doc/ref/guile-invoke.texi
index 08c1698..5a9a3f7 100644
--- a/doc/ref/guile-invoke.texi
+++ b/doc/ref/guile-invoke.texi
@@ -295,8 +295,10 @@ variable. By default, the history file is
@file{$HOME/.guile_history}.
@vindex GUILE_LOAD_COMPILED_PATH
This variable may be used to augment the path that is searched for
compiled Scheme files (@file{.go} files) when loading. Its value should
-be a colon-separated list of directories, which will be prefixed to the
-value of the default search path stored in @code{%load-compiled-path}.
+be a colon-separated list of directories. If it contains the special
+path component @code{...} (ellipsis), then the default path is put in
+place of the ellipsis, otherwise the default path is placed at the end.
+The result is stored in @code{%load-compiled-path} (@pxref{Load Paths}).
Here is an example using the Bash shell that adds the current directory,
@file{.}, and the relative directory @file{../my-library} to
@@ -312,18 +314,23 @@ $ guile -c '(display %load-compiled-path) (newline)'
@vindex GUILE_LOAD_PATH
This variable may be used to augment the path that is searched for
Scheme files when loading. Its value should be a colon-separated list
-of directories, which will be prefixed to the value of the default
-search path stored in @code{%load-path}.
+of directories. If it contains the special path component @code{...}
+(ellipsis), then the default path is put in place of the ellipsis,
+otherwise the default path is placed at the end. The result is stored
+in @code{%load-path} (@pxref{Load Paths}).
-Here is an example using the Bash shell that adds the current directory
-and the parent of the current directory to @code{%load-path}:
+Here is an example using the Bash shell that prepends the current
+directory to @code{%load-path}, and adds the relative directory
address@hidden/srfi} to the end:
@example
-$ env GUILE_LOAD_PATH=".:.." \
+$ env GUILE_LOAD_PATH=".:...:../srfi" \
guile -c '(display %load-path) (newline)'
-(. .. /usr/local/share/guile/2.0 \
+(. /usr/local/share/guile/2.0 \
/usr/local/share/guile/site/2.0 \
-/usr/local/share/guile/site /usr/local/share/guile)
+/usr/local/share/guile/site \
+/usr/local/share/guile \
+../srfi)
@end example
(Note: The line breaks, above, are for documentation purposes only, and
diff --git a/libguile/load.c b/libguile/load.c
index af2ca45..723f3fd 100644
--- a/libguile/load.c
+++ b/libguile/load.c
@@ -221,6 +221,9 @@ static SCM *scm_loc_fresh_auto_compile;
/* The fallback path for auto-compilation */
static SCM *scm_loc_compile_fallback_path;
+/* Ellipsis: "..." */
+static SCM scm_ellipsis;
+
SCM_DEFINE (scm_parse_path, "parse-path", 1, 1, 0,
(SCM path, SCM tail),
"Parse @var{path}, which is expected to be a colon-separated\n"
@@ -243,6 +246,32 @@ SCM_DEFINE (scm_parse_path, "parse-path", 1, 1, 0,
}
#undef FUNC_NAME
+SCM_DEFINE (scm_parse_path_with_ellipsis, "parse-path-with-ellipsis", 2, 0, 0,
+ (SCM path, SCM base),
+ "Parse @var{path}, which is expected to be a colon-separated\n"
+ "string, into a list and return the resulting list with\n"
+ "@var{base} (a list) spliced in place of the @code{...} path\n"
+ "component, if present, or else @var{base} is added to the end.\n"
+ "If @var{path} is @code{#f}, @var{base} is returned.")
+#define FUNC_NAME s_scm_parse_path_with_ellipsis
+{
+ SCM lst = scm_parse_path (path, SCM_EOL);
+ SCM walk = lst;
+ SCM *prev = &lst;
+
+ while (!scm_is_null (walk) &&
+ scm_is_false (scm_equal_p (scm_car (walk), scm_ellipsis)))
+ {
+ prev = SCM_CDRLOC (walk);
+ walk = *prev;
+ }
+ *prev = scm_is_null (walk)
+ ? base
+ : scm_append (scm_list_2 (base, scm_cdr (walk)));
+ return lst;
+}
+#undef FUNC_NAME
+
/* Initialize the global variable %load-path, given the value of the
SCM_SITE_DIR and SCM_LIBRARY_DIR preprocessor symbols and the
@@ -316,11 +345,11 @@ scm_init_load_path ()
env = getenv ("GUILE_LOAD_PATH");
if (env)
- path = scm_parse_path (scm_from_locale_string (env), path);
+ path = scm_parse_path_with_ellipsis (scm_from_locale_string (env), path);
env = getenv ("GUILE_LOAD_COMPILED_PATH");
if (env)
- cpath = scm_parse_path (scm_from_locale_string (env), cpath);
+ cpath = scm_parse_path_with_ellipsis (scm_from_locale_string (env), cpath);
*scm_loc_load_path = path;
*scm_loc_load_compiled_path = cpath;
@@ -1047,6 +1076,8 @@ scm_init_load ()
scm_loc_fresh_auto_compile
= SCM_VARIABLE_LOC (scm_c_define ("%fresh-auto-compile", SCM_BOOL_F));
+ scm_ellipsis = scm_from_latin1_string ("...");
+
the_reader = scm_make_fluid_with_default (SCM_BOOL_F);
scm_c_define("current-reader", the_reader);
diff --git a/libguile/load.h b/libguile/load.h
index 0bddac2..698bbaf 100644
--- a/libguile/load.h
+++ b/libguile/load.h
@@ -27,6 +27,7 @@
SCM_API SCM scm_parse_path (SCM path, SCM tail);
+SCM_API SCM scm_parse_path_with_ellipsis (SCM path, SCM base);
SCM_API SCM scm_primitive_load (SCM filename);
SCM_API SCM scm_c_primitive_load (const char *filename);
SCM_API SCM scm_sys_package_data_dir (void);
hooks/post-receive
--
GNU Guile
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Guile-commits] GNU Guile branch, stable-2.0, updated. v2.0.6-115-gbd31bce,
Mark H Weaver <=