[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[bug#35220] Extra logs
From: |
JesseJohnGildersleve |
Subject: |
[bug#35220] Extra logs |
Date: |
Wed, 10 Apr 2019 17:02:09 +0000 |
Here is the log of a system with the patch applied, showing that it starts with:
[ 48.130] (++) Using config file:
"/gnu/store/0x0bzbpy5mgdzlmnn31kxpvbgs0pl2y8-xserver.conf"
[ 48.130] (++) Using config directory:
"/gnu/store/7c1nhmb59lv435kh74ry2m1wnszqlkrz-xorg.conf.d"
[ 48.130] (==) Using system config directory
"/gnu/store/xxpf6xz7prlwrvvl7sviaxmahsyavx1c-xorg-server-1.20.4/share/X11/xorg.conf.d"
Whereas the other log starts with just:
[ 45.242] (==) Using system config directory
"/gnu/store/xxpf6xz7prlwrvvl7sviaxmahsyavx1c-xorg-server-1.20.4/share/X11/xorg.conf.d"
[ 47.962] (--) Log file renamed from "/var/log/Xorg.pid-450.log" to
"/var/log/Xorg.0.log"
[ 47.962]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 47.962] Build Operating System: GNU GuixSD
[ 47.962] Current Operating System: Linux ur.mom.lol 5.0.7-gnu #1 SMP 1
x86_64
[ 47.962] Kernel command line:
BOOT_IMAGE=/gnu/store/nd31kwyd4krav0dh5847yiynw3g8yqaj-linux-libre-5.0.7/bzImage
--root=root --system=/gnu/store/glyf022rnywq3d30lslp9ls3izcxpm2q-system
--load=/gnu/store/glyf022rnywq3d30lslp9ls3izcxpm2q-system/boot
iommu=soft,rootflags=compress=lzo,autodefrag
[ 47.962] Build Date: 01 January 1970 12:00:01AM
[ 47.962]
[ 47.962] Current version of pixman: 0.36.0
[ 47.962] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 47.962] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 47.962] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 10 17:56:55
2019
[ 48.130] (++) Using config file:
"/gnu/store/0x0bzbpy5mgdzlmnn31kxpvbgs0pl2y8-xserver.conf"
[ 48.130] (++) Using config directory:
"/gnu/store/7c1nhmb59lv435kh74ry2m1wnszqlkrz-xorg.conf.d"
[ 48.130] (==) Using system config directory
"/gnu/store/xxpf6xz7prlwrvvl7sviaxmahsyavx1c-xorg-server-1.20.4/share/X11/xorg.conf.d"
[ 48.155] (==) No Layout section. Using the first Screen section.
[ 48.155] (**) |-->Screen "screen-nouveau" (0)
[ 48.155] (**) | |-->Monitor "<default monitor>"
[ 48.155] (**) | |-->Device "device-nouveau"
[ 48.155] (==) No monitor specified for screen "screen-nouveau".
Using a default monitor configuration.
[ 48.155] (**) Option "AllowMouseOpenFail" "on"
[ 48.155] (==) Automatically adding devices
[ 48.155] (==) Automatically enabling devices
[ 48.155] (==) Automatically adding GPU devices
[ 48.155] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 48.480] (**) FontPath set to:
/gnu/store/cn966w06mgzsbprs5cdzmv3ll8if3gr5-font-alias-1.0.3/share/fonts/X11/75dpi,
/gnu/store/cn966w06mgzsbprs5cdzmv3ll8if3gr5-font-alias-1.0.3/share/fonts/X11/100dpi,
/gnu/store/cn966w06mgzsbprs5cdzmv3ll8if3gr5-font-alias-1.0.3/share/fonts/X11/misc,
/gnu/store/cn966w06mgzsbprs5cdzmv3ll8if3gr5-font-alias-1.0.3/share/fonts/X11/cyrillic,
/gnu/store/c6xanp3280ivgb8s0hn8hcv09hazh6zg-font-misc-misc-1.1.2/share/fonts/X11/misc,
/gnu/store/10ck7vgnj15kg1ik7lyaicabc48c20yb-font-adobe75dpi-1.0.3/share/fonts/X11/75dpi
[ 48.480] (**) ModulePath set to
"/gnu/store/0g3k066myxpma9n6rxk78mf4sz9xivn2-xf86-video-nouveau-1.0.16/lib/xorg/modules/drivers,/gnu/store/kqlf8c5r8lsasynxlih041cmxdf7xpr2-xf86-input-evdev-2.10.6/lib/xorg/modules/input,/gnu/store/xxpf6xz7prlwrvvl7sviaxmahsyavx1c-xorg-server-1.20.4/lib/xorg/modules/drivers,/gnu/store/xxpf6xz7prlwrvvl7sviaxmahsyavx1c-xorg-server-1.20.4/lib/xorg/modules/extensions,/gnu/store/xxpf6xz7prlwrvvl7sviaxmahsyavx1c-xorg-server-1.20.4/lib/xorg/modules"
[ 48.480] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 48.480] (II) Loader magic: 0x616d00
[ 48.480] (II) Module ABI versions:
[ 48.480] X.Org ANSI C Emulation: 0.4
[ 48.480] X.Org Video Driver: 24.0
[ 48.480] X.Org XInput driver : 24.1
[ 48.480] X.Org Server Extension : 10.0
[ 48.481] (++) using VT number 7
[ 48.481] (II) systemd-logind: logind integration requires -keeptty and
-keeptty was not provided, disabling logind integration
[ 48.481] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 48.485] (--) PCI:*(address@hidden:0:0) 10de:0fc6:1043:848a rev 161, Mem @
0xfd000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @
0x0000e000/128, BIOS @ 0x????????/131072
[ 48.485] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or
directory)
[ 48.485] (II) LoadModule: "glx"
[ 48.619] (II) Loading
/gnu/store/xxpf6xz7prlwrvvl7sviaxmahsyavx1c-xorg-server-1.20.4/lib/xorg/modules/extensions/libglx.so
[ 49.902] (II) Module glx: vendor="X.Org Foundation"
[ 49.902] compiled for 1.20.4, module version = 1.0.0
[ 49.902] ABI class: X.Org Server Extension, version 10.0
[ 49.902] (II) LoadModule: "nouveau"
[ 49.902] (II) Loading
/gnu/store/0g3k066myxpma9n6rxk78mf4sz9xivn2-xf86-video-nouveau-1.0.16/lib/xorg/modules/drivers/nouveau_drv.so
[ 49.972] (II) Module nouveau: vendor="X.Org Foundation"
[ 49.972] compiled for 1.20.4, module version = 1.0.16
[ 49.972] Module class: X.Org Video Driver
[ 49.972] ABI class: X.Org Video Driver, version 24.0
[ 49.972] (II) NOUVEAU driver
[ 49.972] (II) NOUVEAU driver for NVIDIA chipset families :
[ 49.972] RIVA TNT (NV04)
[ 49.972] RIVA TNT2 (NV05)
[ 49.973] GeForce 256 (NV10)
[ 49.973] GeForce 2 (NV11, NV15)
[ 49.973] GeForce 4MX (NV17, NV18)
[ 49.973] GeForce 3 (NV20)
[ 49.973] GeForce 4Ti (NV25, NV28)
[ 49.973] GeForce FX (NV3x)
[ 49.973] GeForce 6 (NV4x)
[ 49.973] GeForce 7 (G7x)
[ 49.973] GeForce 8 (G8x)
[ 49.973] GeForce 9 (G9x)
[ 49.973] GeForce GTX 2xx/3xx (GT2xx)
[ 49.973] GeForce GTX 4xx/5xx (GFxxx)
[ 49.973] GeForce GTX 6xx/7xx (GKxxx)
[ 49.973] GeForce GTX 9xx (GMxxx)
[ 49.973] GeForce GTX 10xx (GPxxx)
[ 49.975] (II) [drm] nouveau interface version: 1.3.1
[ 49.975] (II) Loading sub module "dri2"
[ 49.975] (II) LoadModule: "dri2"
[ 49.975] (II) Module "dri2" already built-in
[ 49.975] (--) NOUVEAU(0): Chipset: "NVIDIA NVE7"
[ 49.975] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 49.975] (==) NOUVEAU(0): RGB weight 888
[ 49.975] (==) NOUVEAU(0): Default visual is TrueColor
[ 49.975] (==) NOUVEAU(0): Using HW cursor
[ 49.975] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[ 49.975] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 49.975] (==) NOUVEAU(0): Page flipping enabled
[ 49.975] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 49.975] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 49.975] (II) NOUVEAU(0): Initializing outputs ...
[ 50.018] (II) NOUVEAU(0): Output VGA-1 using monitor section VGA-1
[ 50.020] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 50.062] (II) NOUVEAU(0): Output DVI-D-1 using monitor section DVI-D-1
[ 50.062] (**) NOUVEAU(0): Option "RightOf" "VGA-1"
[ 50.062] (II) NOUVEAU(0): 3 crtcs needed for screen.
[ 50.062] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 50.062] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 50.062] (II) NOUVEAU(0): Allocated crtc nr. 2 to this screen.
[ 50.062] (II) NOUVEAU(0): Allocated crtc nr. 3 to this screen.
[ 50.105] (II) NOUVEAU(0): EDID for output VGA-1
[ 50.105] (II) NOUVEAU(0): Manufacturer: GSM Model: 56fe Serial#: 65969
[ 50.105] (II) NOUVEAU(0): Year: 2009 Week: 6
[ 50.105] (II) NOUVEAU(0): EDID Version: 1.3
[ 50.105] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level:
0.700/0.700 V
[ 50.105] (II) NOUVEAU(0): Sync: Separate SyncOnGreen
[ 50.105] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 50.105] (II) NOUVEAU(0): Gamma: 2.20
[ 50.105] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
Display
[ 50.105] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 50.105] (II) NOUVEAU(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY:
0.611
[ 50.105] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY:
0.329
[ 50.105] (II) NOUVEAU(0): Supported established timings:
[ 50.105] (II) NOUVEAU(0): address@hidden
[ 50.105] (II) NOUVEAU(0): address@hidden
[ 50.105] (II) NOUVEAU(0): address@hidden
[ 50.105] (II) NOUVEAU(0): address@hidden
[ 50.105] (II) NOUVEAU(0): address@hidden
[ 50.105] (II) NOUVEAU(0): address@hidden
[ 50.105] (II) NOUVEAU(0): address@hidden
[ 50.105] (II) NOUVEAU(0): address@hidden
[ 50.105] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 50.105] (II) NOUVEAU(0): Supported standard timings:
[ 50.105] (II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 50.105] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 50.105] (II) NOUVEAU(0): #2: hsize: 1152 vsize 864 refresh: 75 vid:
20337
[ 50.105] (II) NOUVEAU(0): #3: hsize: 1280 vsize 720 refresh: 75 vid:
53121
[ 50.105] (II) NOUVEAU(0): #4: hsize: 1280 vsize 960 refresh: 75 vid:
20353
[ 50.105] (II) NOUVEAU(0): Supported detailed timing:
[ 50.105] (II) NOUVEAU(0): clock: 138.5 MHz Image Size: 477 x 269 mm
[ 50.105] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000
h_blank_end 2080 h_border: 0
[ 50.105] (II) NOUVEAU(0): v_active: 1080 v_sync: 1082 v_sync_end 1087
v_blanking: 1111 v_border: 0
[ 50.105] (II) NOUVEAU(0): Supported detailed timing:
[ 50.105] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 477 x 269 mm
[ 50.105] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052
h_blank_end 2200 h_border: 0
[ 50.105] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089
v_blanking: 1125 v_border: 0
[ 50.105] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max:
83 kHz, PixClock max 155 MHz
[ 50.105] (II) NOUVEAU(0): Monitor name: W2243
[ 50.105] (II) NOUVEAU(0): EDID (in hex):
[ 50.105] (II) NOUVEAU(0): 00ffffffffffff001e6dfe56b1010100
[ 50.105] (II) NOUVEAU(0): 061301036a301b78eaaec5a2574a9c25
[ 50.105] (II) NOUVEAU(0): 125054a54b00b3008180714f81cf814f
[ 50.105] (II) NOUVEAU(0): 0101010101011a3680a070381f403020
[ 50.105] (II) NOUVEAU(0): 2500dd0d1100001a023a801871382d40
[ 50.105] (II) NOUVEAU(0): 582c4500dd0d1100001e000000fd0038
[ 50.105] (II) NOUVEAU(0): 4b1e530f000a202020202020000000fc
[ 50.105] (II) NOUVEAU(0): 0057323234330a2020202020202000ea
[ 50.105] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 50.105] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000
2080 1080 1082 1087 1111 +hsync -vsync (66.6 kHz UeP)
[ 50.105] (II) NOUVEAU(0): Modeline "1920x1080_75.00"x75.0 220.64 1920
2056 2264 2608 1080 1081 1084 1128 -hsync +vsync (84.6 kHz)
[ 50.105] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052
2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 50.105] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 50.105] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 50.105] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 50.105] (II) NOUVEAU(0): Modeline "1280x960"x75.0 129.94 1280 1368 1504
1728 960 961 964 1002 -hsync +vsync (75.2 kHz)
[ 50.105] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 50.105] (II) NOUVEAU(0): Modeline "1280x720"x75.0 95.68 1280 1352 1488
1696 720 721 724 752 -hsync +vsync (56.4 kHz)
[ 50.105] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 50.105] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 50.105] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 50.105] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 50.105] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 50.105] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 50.105] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 50.107] (II) NOUVEAU(0): EDID for output HDMI-1
[ 50.149] (II) NOUVEAU(0): EDID for output DVI-D-1
[ 50.149] (II) NOUVEAU(0): Manufacturer: HKC Model: 988 Serial#: 4
[ 50.149] (II) NOUVEAU(0): Year: 2008 Week: 15
[ 50.149] (II) NOUVEAU(0): EDID Version: 1.3
[ 50.149] (II) NOUVEAU(0): Digital Display Input
[ 50.149] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 50.149] (II) NOUVEAU(0): Gamma: 2.20
[ 50.149] (II) NOUVEAU(0): DPMS capabilities: Off
[ 50.149] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 50.149] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 50.149] (II) NOUVEAU(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY:
0.600
[ 50.149] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY:
0.329
[ 50.150] (II) NOUVEAU(0): Supported established timings:
[ 50.150] (II) NOUVEAU(0): address@hidden
[ 50.150] (II) NOUVEAU(0): address@hidden
[ 50.150] (II) NOUVEAU(0): address@hidden
[ 50.150] (II) NOUVEAU(0): address@hidden
[ 50.150] (II) NOUVEAU(0): address@hidden
[ 50.150] (II) NOUVEAU(0): address@hidden
[ 50.150] (II) NOUVEAU(0): address@hidden
[ 50.150] (II) NOUVEAU(0): address@hidden
[ 50.150] (II) NOUVEAU(0): address@hidden
[ 50.150] (II) NOUVEAU(0): address@hidden
[ 50.150] (II) NOUVEAU(0): address@hidden
[ 50.150] (II) NOUVEAU(0): address@hidden
[ 50.150] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 50.150] (II) NOUVEAU(0): Supported standard timings:
[ 50.150] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 50.150] (II) NOUVEAU(0): #1: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 50.150] (II) NOUVEAU(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 50.150] (II) NOUVEAU(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 50.150] (II) NOUVEAU(0): #6: hsize: 1280 vsize 1024 refresh: 70 vid:
35457
[ 50.150] (II) NOUVEAU(0): #7: hsize: 1280 vsize 720 refresh: 60 vid:
49281
[ 50.150] (II) NOUVEAU(0): Supported detailed timing:
[ 50.150] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 410 x 256 mm
[ 50.150] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672
h_blank_end 1904 h_border: 0
[ 50.150] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909
v_blanking: 934 v_border: 0
[ 50.150] (II) NOUVEAU(0): Monitor name:
[ 50.150] (II) NOUVEAU(0): Ranges: V min: 60 V max: 75 Hz, H min: 30 H max:
80 kHz, PixClock max 145 MHz
[ 50.150] (II) NOUVEAU(0): Serial No: 200804220001
[ 50.150] (II) NOUVEAU(0): EDID (in hex):
[ 50.150] (II) NOUVEAU(0): 00ffffffffffff002163880904000000
[ 50.150] (II) NOUVEAU(0): 0f12010380291a782ade95a3544c9926
[ 50.150] (II) NOUVEAU(0): 0f5054afcf0081809500010101018100
[ 50.150] (II) NOUVEAU(0): 8180818a81c09a29a0d0518422305098
[ 50.150] (II) NOUVEAU(0): 36009a001100001c000000fc000a2020
[ 50.150] (II) NOUVEAU(0): 20202020202020202020000000fd003c
[ 50.150] (II) NOUVEAU(0): 4b1e500e000a202020202020000000ff
[ 50.150] (II) NOUVEAU(0): 003230303830343232303030310a006a
[ 50.150] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
[ 50.150] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672
1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 50.150] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "1280x1024"x70.0 128.95 1280 1368 1504
1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz)
[ 50.150] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360
1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430
1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 50.150] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 50.150] (II) NOUVEAU(0): Output VGA-1 connected
[ 50.150] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 50.150] (II) NOUVEAU(0): Output DVI-D-1 connected
[ 50.150] (II) NOUVEAU(0): Using user preference for initial modes
[ 50.150] (II) NOUVEAU(0): Output VGA-1 using initial mode 1920x1080 +0+0
[ 50.150] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1440x900 +0+0
[ 50.150] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 50.150] (II) NOUVEAU(0): Virtual size is 3360x1080 (pitch 0)
[ 50.150] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from
0.0 MHz), 55.9 kHz, 59.9 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672
1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 50.150] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from
0.0 MHz), 80.0 kHz, 75.0 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 50.150] (**) NOUVEAU(0): Mode "1280x1024": 128.9 MHz (scaled from 0.0
MHz), 74.6 kHz, 70.0 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "1280x1024"x70.0 128.95 1280 1368 1504
1728 1024 1025 1028 1066 -hsync +vsync (74.6 kHz)
[ 50.150] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from
0.0 MHz), 64.0 kHz, 60.0 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 50.150] (**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from
0.0 MHz), 49.3 kHz, 59.9 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360
1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 50.150] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from
0.0 MHz), 45.0 kHz, 60.0 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430
1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 50.150] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from
0.0 MHz), 60.0 kHz, 75.0 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 50.150] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from
0.0 MHz), 56.5 kHz, 70.1 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 50.150] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from
0.0 MHz), 48.4 kHz, 60.0 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 50.150] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0
MHz), 48.1 kHz, 72.2 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 50.150] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0
MHz), 46.9 kHz, 75.0 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 50.150] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0
MHz), 37.9 kHz, 60.3 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 50.150] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0
MHz), 35.2 kHz, 56.2 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 50.150] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0
MHz), 37.5 kHz, 75.0 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 50.150] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0
MHz), 37.9 kHz, 72.8 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 50.150] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0
MHz), 31.5 kHz, 59.9 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 50.150] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0
MHz), 31.5 kHz, 70.1 Hz
[ 50.150] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 50.150] (==) NOUVEAU(0): DPI set to (96, 96)
[ 50.150] (II) Loading sub module "fb"
[ 50.150] (II) LoadModule: "fb"
[ 50.151] (II) Loading
/gnu/store/xxpf6xz7prlwrvvl7sviaxmahsyavx1c-xorg-server-1.20.4/lib/xorg/modules/libfb.so
[ 50.197] (II) Module fb: vendor="X.Org Foundation"
[ 50.198] compiled for 1.20.4, module version = 1.0.0
[ 50.198] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50.198] (II) Loading sub module "shadowfb"
[ 50.198] (II) LoadModule: "shadowfb"
[ 50.233] (II) Loading
/gnu/store/xxpf6xz7prlwrvvl7sviaxmahsyavx1c-xorg-server-1.20.4/lib/xorg/modules/libshadowfb.so
[ 50.252] (II) Module shadowfb: vendor="X.Org Foundation"
[ 50.252] compiled for 1.20.4, module version = 1.0.0
[ 50.252] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50.253] (II) NOUVEAU(0): Channel setup complete.
[ 50.253] (II) NOUVEAU(0): [COPY] async initialised.
[ 50.253] (II) NOUVEAU(0): Hardware support for Present enabled
[ 50.253] (II) NOUVEAU(0): [DRI2] Setup complete
[ 50.253] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 50.253] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 50.253] (II) Loading sub module "exa"
[ 50.253] (II) LoadModule: "exa"
[ 50.254] (II) Loading
/gnu/store/xxpf6xz7prlwrvvl7sviaxmahsyavx1c-xorg-server-1.20.4/lib/xorg/modules/libexa.so
[ 50.289] (II) Module exa: vendor="X.Org Foundation"
[ 50.289] compiled for 1.20.4, module version = 2.6.0
[ 50.289] ABI class: X.Org Video Driver, version 24.0
[ 50.289] (II) EXA(0): Driver allocated offscreen pixmaps
[ 50.289] (II) EXA(0): Driver registered support for the following
operations:
[ 50.289] (II) Solid
[ 50.289] (II) Copy
[ 50.289] (II) Composite (RENDER acceleration)
[ 50.289] (II) UploadToScreen
[ 50.289] (II) DownloadFromScreen
[ 50.289] (==) NOUVEAU(0): Backing store enabled
[ 50.289] (==) NOUVEAU(0): Silken mouse enabled
[ 50.289] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9
Textured Video.
[ 50.289] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 50.289] (==) NOUVEAU(0): DPMS enabled
[ 50.290] (II) Initializing extension Generic Event Extension
[ 50.290] (II) Initializing extension SHAPE
[ 50.290] (II) Initializing extension MIT-SHM
[ 50.290] (II) Initializing extension XInputExtension
[ 50.290] (II) Initializing extension XTEST
[ 50.290] (II) Initializing extension BIG-REQUESTS
[ 50.290] (II) Initializing extension SYNC
[ 50.290] (II) Initializing extension XKEYBOARD
[ 50.290] (II) Initializing extension XC-MISC
[ 50.290] (II) Initializing extension XFIXES
[ 50.290] (II) Initializing extension RENDER
[ 50.290] (II) Initializing extension RANDR
[ 50.290] (II) Initializing extension COMPOSITE
[ 50.290] (II) Initializing extension DAMAGE
[ 50.290] (II) Initializing extension MIT-SCREEN-SAVER
[ 50.290] (II) Initializing extension DOUBLE-BUFFER
[ 50.290] (II) Initializing extension RECORD
[ 50.290] (II) Initializing extension DPMS
[ 50.290] (II) Initializing extension Present
[ 50.290] (II) Initializing extension DRI3
[ 50.290] (II) Initializing extension X-Resource
[ 50.290] (II) Initializing extension XVideo
[ 50.290] (II) Initializing extension XVideo-MotionCompensation
[ 50.290] (II) Initializing extension GLX
[ 55.585] (II) AIGLX: Loaded and initialized nouveau
[ 55.585] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 55.585] (II) Initializing extension XFree86-VidModeExtension
[ 55.586] (II) Initializing extension XFree86-DGA
[ 55.586] (II) Initializing extension XFree86-DRI
[ 55.586] (II) Initializing extension DRI2
[ 55.587] (II) NOUVEAU(0): NVEnterVT is called.
[ 55.655] (II) NOUVEAU(0): Setting screen physical size to 889 x 285
[ 55.655] resize called 3360 1080
[ 57.053] (II) XKB: Reusing cached keymap
[ 57.056] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 57.056] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 57.056] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 57.056] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 57.056] (II) LoadModule: "evdev"
[ 57.056] (II) Loading
/gnu/store/kqlf8c5r8lsasynxlih041cmxdf7xpr2-xf86-input-evdev-2.10.6/lib/xorg/modules/input/evdev_drv.so
[ 57.394] (II) Module evdev: vendor="X.Org Foundation"
[ 57.394] compiled for 1.20.4, module version = 2.10.6
[ 57.394] Module class: X.Org XInput Driver
[ 57.394] ABI class: X.Org XInput driver, version 24.1
[ 57.394] (II) Using input driver 'evdev' for 'Power Button'
[ 57.394] (**) Power Button: always reports core events
[ 57.394] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 57.394] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 57.394] (--) evdev: Power Button: Found keys
[ 57.394] (II) evdev: Power Button: Configuring as keyboard
[ 57.394] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 57.394] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[ 57.394] (**) Option "xkb_rules" "evdev"
[ 57.394] (**) Option "xkb_layout" "us"
[ 57.394] (**) Option "xkb_variant" "dvp"
[ 57.394] (**) Option "xkb_options"
"ctrl:swap_lalt_lctl,caps:swapescape,keypad:pointerkeys,terminate:ctrl_alt_bksp"
[ 57.423] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[ 57.423] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 57.423] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 57.423] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 57.423] (II) Using input driver 'evdev' for 'Power Button'
[ 57.423] (**) Power Button: always reports core events
[ 57.423] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 57.423] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 57.423] (--) evdev: Power Button: Found keys
[ 57.423] (II) evdev: Power Button: Configuring as keyboard
[ 57.423] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 57.423] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 7)
[ 57.423] (**) Option "xkb_rules" "evdev"
[ 57.423] (**) Option "xkb_layout" "us"
[ 57.423] (**) Option "xkb_variant" "dvp"
[ 57.423] (**) Option "xkb_options"
"ctrl:swap_lalt_lctl,caps:swapescape,keypad:pointerkeys,terminate:ctrl_alt_bksp"
[ 57.423] (II) XKB: Reusing cached keymap
[ 57.424] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8
(/dev/input/event10)
[ 57.424] (II) No input driver specified, ignoring this device.
[ 57.424] (II) This device may have been added with another device file.
[ 57.424] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3
(/dev/input/event8)
[ 57.424] (II) No input driver specified, ignoring this device.
[ 57.424] (II) This device may have been added with another device file.
[ 57.424] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7
(/dev/input/event9)
[ 57.424] (II) No input driver specified, ignoring this device.
[ 57.424] (II) This device may have been added with another device file.
[ 57.424] (II) config/udev: Adding input device A4TECH USB Device Keyboard
(/dev/input/event11)
[ 57.424] (**) A4TECH USB Device Keyboard: Applying InputClass "evdev
keyboard catchall"
[ 57.424] (**) A4TECH USB Device Keyboard: Applying InputClass "evdev
keyboard catchall"
[ 57.424] (**) A4TECH USB Device Keyboard: Applying InputClass "evdev
keyboard catchall"
[ 57.424] (II) Using input driver 'evdev' for 'A4TECH USB Device Keyboard'
[ 57.424] (**) A4TECH USB Device Keyboard: always reports core events
[ 57.424] (**) evdev: A4TECH USB Device Keyboard: Device:
"/dev/input/event11"
[ 57.424] (--) evdev: A4TECH USB Device Keyboard: Vendor 0x9da Product 0x9090
[ 57.424] (--) evdev: A4TECH USB Device Keyboard: Found keys
[ 57.424] (II) evdev: A4TECH USB Device Keyboard: Configuring as keyboard
[ 57.424] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:09DA:9090.0001/input/input11/event11"
[ 57.424] (II) XINPUT: Adding extended input device "A4TECH USB Device
Keyboard" (type: KEYBOARD, id 8)
[ 57.424] (**) Option "xkb_rules" "evdev"
[ 57.425] (**) Option "xkb_layout" "us"
[ 57.425] (**) Option "xkb_variant" "dvp"
[ 57.425] (**) Option "xkb_options"
"ctrl:swap_lalt_lctl,caps:swapescape,keypad:pointerkeys,terminate:ctrl_alt_bksp"
[ 57.425] (II) XKB: Reusing cached keymap
[ 57.425] (II) config/udev: Adding input device A4TECH USB Device System
Control (/dev/input/event12)
[ 57.425] (**) A4TECH USB Device System Control: Applying InputClass "evdev
keyboard catchall"
[ 57.425] (**) A4TECH USB Device System Control: Applying InputClass "evdev
keyboard catchall"
[ 57.425] (**) A4TECH USB Device System Control: Applying InputClass "evdev
keyboard catchall"
[ 57.425] (II) Using input driver 'evdev' for 'A4TECH USB Device System
Control'
[ 57.425] (**) A4TECH USB Device System Control: always reports core events
[ 57.425] (**) evdev: A4TECH USB Device System Control: Device:
"/dev/input/event12"
[ 57.425] (--) evdev: A4TECH USB Device System Control: Vendor 0x9da Product
0x9090
[ 57.425] (--) evdev: A4TECH USB Device System Control: Found absolute axes
[ 57.425] (II) evdev: A4TECH USB Device System Control: Forcing absolute x/y
axes to exist.
[ 57.425] (--) evdev: A4TECH USB Device System Control: Found keys
[ 57.425] (II) evdev: A4TECH USB Device System Control: Forcing relative x/y
axes to exist.
[ 57.425] (II) evdev: A4TECH USB Device System Control: Configuring as mouse
[ 57.425] (II) evdev: A4TECH USB Device System Control: Configuring as
keyboard
[ 57.425] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:09DA:9090.0001/input/input12/event12"
[ 57.425] (II) XINPUT: Adding extended input device "A4TECH USB Device
System Control" (type: KEYBOARD, id 9)
[ 57.425] (**) Option "xkb_rules" "evdev"
[ 57.425] (**) Option "xkb_layout" "us"
[ 57.425] (**) Option "xkb_variant" "dvp"
[ 57.425] (**) Option "xkb_options"
"ctrl:swap_lalt_lctl,caps:swapescape,keypad:pointerkeys,terminate:ctrl_alt_bksp"
[ 57.425] (II) XKB: Reusing cached keymap
[ 57.425] (II) evdev: A4TECH USB Device System Control: initialized for
relative axes.
[ 57.425] (WW) evdev: A4TECH USB Device System Control: ignoring absolute
axes.
[ 57.425] (**) A4TECH USB Device System Control: (accel) keeping
acceleration scheme 1
[ 57.425] (**) A4TECH USB Device System Control: (accel) acceleration
profile 0
[ 57.426] (**) A4TECH USB Device System Control: (accel) acceleration
factor: 2.000
[ 57.426] (**) A4TECH USB Device System Control: (accel) acceleration
threshold: 4
[ 57.426] (II) config/udev: Adding input device A4TECH USB Device Consumer
Control (/dev/input/event13)
[ 57.426] (**) A4TECH USB Device Consumer Control: Applying InputClass
"evdev keyboard catchall"
[ 57.426] (**) A4TECH USB Device Consumer Control: Applying InputClass
"evdev keyboard catchall"
[ 57.426] (**) A4TECH USB Device Consumer Control: Applying InputClass
"evdev keyboard catchall"
[ 57.426] (II) Using input driver 'evdev' for 'A4TECH USB Device Consumer
Control'
[ 57.426] (**) A4TECH USB Device Consumer Control: always reports core events
[ 57.426] (**) evdev: A4TECH USB Device Consumer Control: Device:
"/dev/input/event13"
[ 57.426] (--) evdev: A4TECH USB Device Consumer Control: Vendor 0x9da
Product 0x9090
[ 57.426] (--) evdev: A4TECH USB Device Consumer Control: Found 1 mouse
buttons
[ 57.426] (--) evdev: A4TECH USB Device Consumer Control: Found scroll
wheel(s)
[ 57.426] (--) evdev: A4TECH USB Device Consumer Control: Found relative axes
[ 57.426] (II) evdev: A4TECH USB Device Consumer Control: Forcing relative
x/y axes to exist.
[ 57.426] (--) evdev: A4TECH USB Device Consumer Control: Found absolute axes
[ 57.426] (II) evdev: A4TECH USB Device Consumer Control: Forcing absolute
x/y axes to exist.
[ 57.426] (--) evdev: A4TECH USB Device Consumer Control: Found keys
[ 57.426] (II) evdev: A4TECH USB Device Consumer Control: Configuring as
mouse
[ 57.426] (II) evdev: A4TECH USB Device Consumer Control: Configuring as
keyboard
[ 57.426] (II) evdev: A4TECH USB Device Consumer Control: Adding scrollwheel
support
[ 57.426] (**) evdev: A4TECH USB Device Consumer Control: YAxisMapping:
buttons 4 and 5
[ 57.426] (**) evdev: A4TECH USB Device Consumer Control:
EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 57.426] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:09DA:9090.0001/input/input13/event13"
[ 57.426] (II) XINPUT: Adding extended input device "A4TECH USB Device
Consumer Control" (type: KEYBOARD, id 10)
[ 57.426] (**) Option "xkb_rules" "evdev"
[ 57.426] (**) Option "xkb_layout" "us"
[ 57.426] (**) Option "xkb_variant" "dvp"
[ 57.426] (**) Option "xkb_options"
"ctrl:swap_lalt_lctl,caps:swapescape,keypad:pointerkeys,terminate:ctrl_alt_bksp"
[ 57.426] (II) XKB: Reusing cached keymap
[ 57.426] (II) evdev: A4TECH USB Device Consumer Control: initialized for
relative axes.
[ 57.426] (WW) evdev: A4TECH USB Device Consumer Control: ignoring absolute
axes.
[ 57.426] (**) A4TECH USB Device Consumer Control: (accel) keeping
acceleration scheme 1
[ 57.426] (**) A4TECH USB Device Consumer Control: (accel) acceleration
profile 0
[ 57.426] (**) A4TECH USB Device Consumer Control: (accel) acceleration
factor: 2.000
[ 57.426] (**) A4TECH USB Device Consumer Control: (accel) acceleration
threshold: 4
[ 57.427] (II) config/udev: Adding input device A4TECH USB Device
(/dev/input/event14)
[ 57.427] (II) No input driver specified, ignoring this device.
[ 57.427] (II) This device may have been added with another device file.
[ 57.427] (II) config/udev: Adding input device A4TECH USB Device
(/dev/input/event15)
[ 57.427] (**) A4TECH USB Device: Applying InputClass "evdev pointer
catchall"
[ 57.427] (**) A4TECH USB Device: Applying InputClass "evdev mouse pointer
catchall"
[ 57.427] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[ 57.427] (**) A4TECH USB Device: always reports core events
[ 57.427] (**) evdev: A4TECH USB Device: Device: "/dev/input/event15"
[ 57.487] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
[ 57.487] (--) evdev: A4TECH USB Device: Found 20 mouse buttons
[ 57.487] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[ 57.487] (--) evdev: A4TECH USB Device: Found relative axes
[ 57.487] (--) evdev: A4TECH USB Device: Found x and y relative axes
[ 57.487] (II) evdev: A4TECH USB Device: Configuring as mouse
[ 57.487] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[ 57.487] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[ 57.487] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 57.487] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/0003:09DA:9090.0002/input/input15/event15"
[ 57.487] (II) XINPUT: Adding extended input device "A4TECH USB Device"
(type: MOUSE, id 11)
[ 57.487] (II) evdev: A4TECH USB Device: initialized for relative axes.
[ 57.487] (**) Option "AccelerationScheme" "none"
[ 57.487] (**) A4TECH USB Device: (accel) selected scheme none/0
[ 57.487] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[ 57.487] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[ 57.488] (II) config/udev: Adding input device A4TECH USB Device
(/dev/input/mouse0)
[ 57.488] (**) A4TECH USB Device: Applying InputClass "evdev mouse pointer
catchall"
[ 57.488] (II) No input driver specified, ignoring this device.
[ 57.488] (II) This device may have been added with another device file.
[ 57.488] (II) config/udev: Adding input device CM Storm Quickfire TKL 6keys
(/dev/input/event16)
[ 57.488] (**) CM Storm Quickfire TKL 6keys: Applying InputClass "evdev
keyboard catchall"
[ 57.488] (**) CM Storm Quickfire TKL 6keys: Applying InputClass "evdev
keyboard catchall"
[ 57.488] (**) CM Storm Quickfire TKL 6keys: Applying InputClass "evdev
keyboard catchall"
[ 57.488] (II) Using input driver 'evdev' for 'CM Storm Quickfire TKL 6keys'
[ 57.488] (**) CM Storm Quickfire TKL 6keys: always reports core events
[ 57.488] (**) evdev: CM Storm Quickfire TKL 6keys: Device:
"/dev/input/event16"
[ 57.488] (--) evdev: CM Storm Quickfire TKL 6keys: Vendor 0x2516 Product
0x11
[ 57.488] (--) evdev: CM Storm Quickfire TKL 6keys: Found keys
[ 57.488] (II) evdev: CM Storm Quickfire TKL 6keys: Configuring as keyboard
[ 57.488] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:2516:0011.0003/input/input16/event16"
[ 57.488] (II) XINPUT: Adding extended input device "CM Storm Quickfire TKL
6keys" (type: KEYBOARD, id 12)
[ 57.488] (**) Option "xkb_rules" "evdev"
[ 57.488] (**) Option "xkb_layout" "us"
[ 57.488] (**) Option "xkb_variant" "dvp"
[ 57.488] (**) Option "xkb_options"
"ctrl:swap_lalt_lctl,caps:swapescape,keypad:pointerkeys,terminate:ctrl_alt_bksp"
[ 57.488] (II) XKB: Reusing cached keymap
[ 57.489] (II) config/udev: Adding input device CM Storm Quickfire TKL 6keys
System Control (/dev/input/event17)
[ 57.489] (**) CM Storm Quickfire TKL 6keys System Control: Applying
InputClass "evdev keyboard catchall"
[ 57.489] (**) CM Storm Quickfire TKL 6keys System Control: Applying
InputClass "evdev keyboard catchall"
[ 57.489] (**) CM Storm Quickfire TKL 6keys System Control: Applying
InputClass "evdev keyboard catchall"
[ 57.489] (II) Using input driver 'evdev' for 'CM Storm Quickfire TKL 6keys
System Control'
[ 57.489] (**) CM Storm Quickfire TKL 6keys System Control: always reports
core events
[ 57.489] (**) evdev: CM Storm Quickfire TKL 6keys System Control: Device:
"/dev/input/event17"
[ 57.489] (--) evdev: CM Storm Quickfire TKL 6keys System Control: Vendor
0x2516 Product 0x11
[ 57.489] (--) evdev: CM Storm Quickfire TKL 6keys System Control: Found keys
[ 57.489] (II) evdev: CM Storm Quickfire TKL 6keys System Control:
Configuring as keyboard
[ 57.489] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/0003:2516:0011.0004/input/input17/event17"
[ 57.489] (II) XINPUT: Adding extended input device "CM Storm Quickfire TKL
6keys System Control" (type: KEYBOARD, id 13)
[ 57.489] (**) Option "xkb_rules" "evdev"
[ 57.489] (**) Option "xkb_layout" "us"
[ 57.489] (**) Option "xkb_variant" "dvp"
[ 57.489] (**) Option "xkb_options"
"ctrl:swap_lalt_lctl,caps:swapescape,keypad:pointerkeys,terminate:ctrl_alt_bksp"
[ 57.489] (II) XKB: Reusing cached keymap
[ 57.489] (II) config/udev: Adding input device CM Storm Quickfire TKL 6keys
Consumer Control (/dev/input/event18)
[ 57.489] (**) CM Storm Quickfire TKL 6keys Consumer Control: Applying
InputClass "evdev keyboard catchall"
[ 57.489] (**) CM Storm Quickfire TKL 6keys Consumer Control: Applying
InputClass "evdev keyboard catchall"
[ 57.489] (**) CM Storm Quickfire TKL 6keys Consumer Control: Applying
InputClass "evdev keyboard catchall"
[ 57.489] (II) Using input driver 'evdev' for 'CM Storm Quickfire TKL 6keys
Consumer Control'
[ 57.489] (**) CM Storm Quickfire TKL 6keys Consumer Control: always reports
core events
[ 57.489] (**) evdev: CM Storm Quickfire TKL 6keys Consumer Control: Device:
"/dev/input/event18"
[ 57.489] (--) evdev: CM Storm Quickfire TKL 6keys Consumer Control: Vendor
0x2516 Product 0x11
[ 57.489] (--) evdev: CM Storm Quickfire TKL 6keys Consumer Control: Found
keys
[ 57.489] (II) evdev: CM Storm Quickfire TKL 6keys Consumer Control:
Configuring as keyboard
[ 57.489] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/0003:2516:0011.0004/input/input18/event18"
[ 57.489] (II) XINPUT: Adding extended input device "CM Storm Quickfire TKL
6keys Consumer Control" (type: KEYBOARD, id 14)
[ 57.489] (**) Option "xkb_rules" "evdev"
[ 57.489] (**) Option "xkb_layout" "us"
[ 57.489] (**) Option "xkb_variant" "dvp"
[ 57.489] (**) Option "xkb_options"
"ctrl:swap_lalt_lctl,caps:swapescape,keypad:pointerkeys,terminate:ctrl_alt_bksp"
[ 57.489] (II) XKB: Reusing cached keymap
[ 57.490] (II) config/udev: Adding input device HDA ATI SB Front Mic
(/dev/input/event3)
[ 57.490] (II) No input driver specified, ignoring this device.
[ 57.490] (II) This device may have been added with another device file.
[ 57.490] (II) config/udev: Adding input device HDA ATI SB Rear Mic
(/dev/input/event4)
[ 57.490] (II) No input driver specified, ignoring this device.
[ 57.490] (II) This device may have been added with another device file.
[ 57.490] (II) config/udev: Adding input device HDA ATI SB Line
(/dev/input/event5)
[ 57.490] (II) No input driver specified, ignoring this device.
[ 57.490] (II) This device may have been added with another device file.
[ 57.490] (II) config/udev: Adding input device HDA ATI SB Line Out
(/dev/input/event6)
[ 57.490] (II) No input driver specified, ignoring this device.
[ 57.490] (II) This device may have been added with another device file.
[ 57.491] (II) config/udev: Adding input device HDA ATI SB Front Headphone
(/dev/input/event7)
[ 57.491] (II) No input driver specified, ignoring this device.
[ 57.491] (II) This device may have been added with another device file.
[ 57.491] (II) config/udev: Adding input device PC Speaker
(/dev/input/event2)
[ 57.491] (II) No input driver specified, ignoring this device.
[ 57.491] (II) This device may have been added with another device file.