[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: error in bootloader config while system init
From: |
znavko |
Subject: |
Re: error in bootloader config while system init |
Date: |
Tue, 21 May 2019 18:11:06 +0000 |
I have another error with Grub bootloader here:
# guix system init /mnt/etc/config.scm /mnt 2>1
# cat 1 | nc termbin.com 999
error: '/gnu/store/9kvnp0vp24vplnwxd7svr8mlcbxa2f0l-grub-2.02/sbin/grub-install
--no-floppy
--target=i386-pc --boot-directory /mnt/boot /dev/sdb' exited with status 1;
output follows:
Installing for i386-pc platform.
/gnu/store/9kvnp0vp24vplnwxd7svr8mlcbxa2f0l-grub-2.02/sbin/grub-install:
warning: this GPT
partition label contains no BIOS Boot Partition; embedding won't be possible.
/gnu/store/9kvnp0vp24vplnwxd7svr8mlcbxa2f0l-grub-2.02/sbin/grub-install:
warning: Embedding is not
possible. GRUB can only be installed in this setup by using blocklists.
However, blocklists are
UNRELIABLE and their use is discouraged..
/gnu/store/9kvnp0vp24vplnwxd7svr8mlcbxa2f0l-grub-2.02/sbin/grub-install: error:
will not proceed
with blocklists.
guix system: error: failed to install bootloader
/gnu/store/2n39p56aqcgrzjap8395k7q8dxcm0kpp-bootloader-installer
# cat /mnt/etc/config.scm | nc termbin.com 999
Here it the bootloader section:
(operating-system (host-name "antelope") (timezone "Europe/Moscow") (locale
"en_US.utf8")
(bootloader
(bootloader-configuration
(bootloader grub-bootloader)
(target "/dev/sdb")))
(initrd-modules (append (list "sata_sis")
%base-initrd-modules))
(file-systems (cons
(file-system
(device "/dev/sdb1")
(mount-point "/")
(type "ext4"))
%base-file-systems))
(swap-devices '("/dev/sdb2"))
...
# fdisk -l
...
Device Start End Sectors Size Type
/dev/sdb1 2048 104859647 104857600 50G Linux filesystem
/dev/sdb2 104859648 125045390 20185743 9.6G Linux swap
As I understood, guix needs another disk partition, one separate for grub.
I tried this but unsuccessfully:
# fdisk -l
Device Start End Sectors Size Type
/dev/sdb1 2048 15626239 15624192 7.5G BIOS boot
/dev/sdb2 15626240 99610623 83984384 40G Linux filesystem
/dev/sdb3 99610624 125045390 25434767 12.1G Linux swap
# cat config.scm
...
(operating-system (host-name "antelope") (timezone "Europe/Moscow") (locale
"en_US.utf8")
(bootloader (bootloader-configuration
(bootloader grub-bootloader)
(target "/dev/sdb")))
(initrd-modules (append (list "sata_sis")
%base-initrd-modules))
(file-systems (list (file-system
(device "/dev/sdb1")
(mount-point "/boot")
(type "ext4"))
(file-system
(device "/dev/sdb2")
(mount-point "/")
(type "ext4"))
%base-file-systems))
(swap-devices '("/dev/sdb3"))
...
# guix system init /mnt/etc/config.scm /mnt 2>1
# cat 1 | nc termbin.com 9999
Backtrace:
17 (apply-smob/1 #<catch-closure b1a8e0>)
In ice-9/boot-9.scm:
705:2 16 (call-with-prompt _ _ #<procedure default-prompt-handle…>)
In ice-9/eval.scm:
619:8 15 (_ #(#(#<directory (guile-user) b9c140>)))
In guix/ui.scm:
1747:12 14 (run-guix-command _ . _)
In ice-9/boot-9.scm:
829:9 13 (catch _ _ #<procedure 7f60d3abd910 at guix/ui.scm:703…> …)
829:9 12 (catch _ _ #<procedure 7f60d3abd928 at guix/ui.scm:826…> …)
In guix/scripts/system.scm:
1325:8 11 (_)
In guix/status.scm:
768:4 10 (call-with-status-report _ _)
In guix/scripts/system.scm:
1181:4 9 (process-action _ _ _)
In guix/store.scm:
623:10 8 (call-with-store _)
1794:24 7 (run-with-store _ _ #:guile-for-build _ #:system _ # _)
In guix/scripts/system.scm:
1197:13 6 (_ _)
867:9 5 (perform-action init #<<operating-system> kernel: #<pa…> …)
In gnu/system.scm:
975:26 4 (operating-system-bootcfg #<<operating-system> kernel:…> …)
992:26 3 (operating-system-boot-parameters #<<operating-system>…> …)
889:4 2 (operating-system-initrd-file #<<operating-system> kern…>)
In unknown file:
1 (filter #<procedure file-system-needed-for-boot? (fs)> #)
In gnu/system/file-systems.scm:
241:6 0 (file-system-needed-for-boot? _)
gnu/system/file-systems.scm:241:6: In procedure file-system-needed-for-boot?:
In procedure struct_vtable: Wrong type argument in position 1 (expecting
struct): (#<<file-system> device: "none" mount-point: "/dev/pts" type: "devpts"
flags: () options: "gid=996,mode=620" mount?: #t needed-for-boot?: #f check?:
#f create-mount-point?: #t dependencies: () location: ((line . 325) (column .
2) (filename . "gnu/system/file-systems.scm"))> #<<file-system> device: "tmpfs"
mount-point: "/dev/shm" type: "tmpfs" flags: (no-suid no-dev) options:
"size=50%" mount?: #t needed-for-boot?: #f check?: #f create-mount-point?: #t
dependencies: () location: ((line . 336) (column . 2) (filename .
"gnu/system/file-systems.scm"))> #<<file-system> device: "/gnu/store"
mount-point: "/gnu/store" type: "none" flags: (read-only bind-mount) options:
#f mount?: #t needed-for-boot?: #f check?: #f create-mount-point?: #f
dependencies: () location: ((line . 349) (column . 2) (filename .
"gnu/system/file-systems.scm"))>)
This info lacks from manual.
May 21, 2019 1:23 PM, "Ludovic Courtès" <address@hidden> wrote:
> Hi znavko,
>
> Giovanni Biscuolo <address@hidden> skribis:
>
>> In gnu/system.scm:
>> 974:26 0 (operating-system-bootcfg #<<operating-system> kernel:…> …)
>>
>> gnu/system.scm:974:26: In procedure operating-system-bootcfg:
>> In procedure struct_vtable: Wrong type argument in position 1 (expecting
>> struct): #f
>
> [...]
>
>> (file-systems (cons (file-system (device "/dev/sdb1") (mount-point "/mnt")
>> (type "ext4"))
>> %base-file-systems))
>
> I think Guix is trying to tell you, with its own words *cough*, that
> your OS config does not specify a root file system. Indeed, there’s
> “/mnt” there, but no “/”.
>
> HTH!
>
> Ludo’.