Re: [Linphone-developers] Linphone-developers Digest, Vol 114, Issue 5

[Don Thorp (address@hidden)]

I had a similar issue until I put the pre-built toolchain in the path.
You might read through this google group on how to create the
standalone toolchains.
https://groups.google.com/forum/?fromgroups#!topic/android-ndk/6C55SW74_KA

On Tue, Aug 7, 2012 at 5:01 AM, Lau KhimChuen <address@hidden> wrote:
> Hi!
> Im sorry, I had missed some of the useful info in config.err :
>
> line 271: arm-none-linux-gnueabi-gcc: command not found
>
>
> Is it because of this gcc missing?
> I am getting it from CodeSourcery, hope it work.
>
>
> --------------------------------------------- config.err
> -----------------------------------------------------------------
> # ./configure --target=armv7-android-gcc
> --sdk-path=/cygdrive/c/android-ndk-r8b --enable-error-concealment
>
> Configuring selected codecs
>   enabling vp8_encoder
>   enabling vp8_decoder
> Configuring for target 'armv7-android-gcc'
>   enabling armv7
>   enabling armv6
>   enabling armv5te
>   enabling fast_unaligned
> add_asflags --defsym ARCHITECTURE=7
> check_cflags -march=armv7-a -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp
> check_cc -march=armv7-a -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp
> BEGIN /tmp/vpx-conf-5704-20064.c
>     1    int x;
> END /tmp/vpx-conf-5704-20064.c
> arm-none-linux-gnueabi-gcc -march=armv7-a -mcpu=cortex-a8 -mfpu=neon
> -mfloat-abi=softfp -c -o /tmp/vpx-conf-5704-12736.o
> /tmp/vpx-conf-5704-20064.c
> ./build/make/configure.sh: line 271: arm-none-linux-gnueabi-gcc: command not
> found
> add_asflags -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp
>   enabling realtime_only
> check_cflags -O3
> check_cc -O3
> BEGIN /tmp/vpx-conf-5704-20064.c
>     1    int x;
> END /tmp/vpx-conf-5704-20064.c
> /cygdrive/c/android-ndk-r8b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/windows/bin/arm-linux-androideabi-gcc
> --sysroot=/cygdrive/c/android-ndk-r8b/platforms/android-14/arch-arm -O3 -c
> -o /tmp/vpx-conf-5704-12736.o /tmp/vpx-conf-5704-20064.c
> arm-linux-androideabi-gcc.exe: /tmp/vpx-conf-5704-20064.c: No such file or
> directory
> arm-linux-androideabi-gcc.exe: no input files
> check_cflags -fPIC
> check_cc -fPIC
> . . . .
>  . . . .
> . . . .
> ------------------------------------end -------------------------------
>
>
>
> Thanks & regards,
> KC Lau.
>
>
>
>
>
>
>
>> From: address@hidden
>> Subject: Linphone-developers Digest, Vol 114, Issue 5
>> To: address@hidden
>> Date: Mon, 6 Aug 2012 12:00:36 -0400
>
>>
>> Send Linphone-developers mailing list submissions to
>> address@hidden
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> https://lists.nongnu.org/mailman/listinfo/linphone-developers
>> or, via email, send a message with subject or body 'help' to
>> address@hidden
>>
>> You can reach the person managing the list at
>> address@hidden
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of Linphone-developers digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Linphone-android, Prepare_sources.sh at cygwin with the
>> message 'VP8 prepare stage failed.' (Lau KhimChuen)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Mon, 6 Aug 2012 09:14:43 +0000
>> From: Lau KhimChuen <address@hidden>
>> To: <address@hidden>
>> Subject: [Linphone-developers] Linphone-android, Prepare_sources.sh at
>> cygwin with the message 'VP8 prepare stage failed.'
>> Message-ID: <address@hidden>
>> Content-Type: text/plain; charset="iso-8859-1"
>>
>>
>> Hi! I was trying to start my Linphone Android project, and started
>> configuration by executing the ./prepare_sources.sh (from cygwin), it showed
>> me the failed message as follow :
>>
>>
>> --------------- start --------------------------
>>
>> Configuring selected codecs
>> enabling vp8_encoder
>> enabling vp8_decoder
>> Configuring for target 'armv7-android-gcc'
>> enabling armv7
>> enabling armv6
>> enabling armv5te
>> enabling fast_unaligned
>> enabling realtime_only
>>
>> Unable to invoke compiler:
>> /cygdrive/c/android-ndk-r8b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/windows/bin/arm-linux-
>>
>> androideabi-gcc
>> --sysroot=/cygdrive/c/android-ndk-r8b/platforms/android-14/arch-arm
>>
>> Configuration failed. This could reflect a misconfiguration of your
>> toolchains, improper options selected, or another problem. If you
>> don't see any useful error messages above, the next step is to look
>> at the configure error log file (config.err) to determine what
>> configure was trying to do when it died.
>> VP8 prepare stage failed.
>>
>> --------------- end log -----------------------
>>
>>
>> My sources & versions :
>> linphone-android source => git clone
>> git://git.linphone.org/linphone-android.git --recursive
>> cygwin version ( CYGWIN_NT-5.1 lpcx037 1.7.16(0.262/5/3) 2012-07-20 22:55
>> i686 Cygwin )
>> ndk-r8b
>> Window XP OS
>>
>>
>>
>> Had tried to search and updated the latest sdk, ndk and cygwin also cannot
>> resolve the issue.
>>
>> Any pointers would be greatly appreciated!
>>
>> Thanks and regards,
>> KC Lau.
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> <http://lists.nongnu.org/archive/html/linphone-developers/attachments/20120806/16ccbeb7/attachment.html>
>>
>> ------------------------------
>>
>> _______________________________________________
>> Linphone-developers mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/linphone-developers
>>
>>
>> End of Linphone-developers Digest, Vol 114, Issue 5
>> ***************************************************
>
> _______________________________________________
> Linphone-developers mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/linphone-developers
>