Archives are refreshed every 15 minutes - for details, please visit
the main index
.
You can also
download the archives in mbox format
.
octave-bug-tracker (date)
[
Thread Index
][
Top
][
All Lists
][
octave-bug-tracker info page
]
Advanced
[
Prev Period
]
Last Modified: Thu Apr 30 2020 23:33:27 -0400
Messages in reverse chronological order
[
Next Period
]
April 30, 2020
[Octave-bug-tracker] [bug #58279] vararginvarargout
,
John W. Eaton
,
23:33
[Octave-bug-tracker] [bug #57867] strrep: unexpected substitution behavior on a char array
,
Abdelrhman_Adel_Moawad
,
22:25
[Octave-bug-tracker] [bug #58281] Segmentation fault when calling anonymous function without any arguments
,
Rik
,
19:03
[Octave-bug-tracker] [bug #58281] Segmentation fault when calling anonymous function without any arguments
,
Rik
,
19:01
[Octave-bug-tracker] [bug #58279] vararginvarargout
,
Rik
,
19:00
[Octave-bug-tracker] [bug #58279] vararginvarargout
,
Rik
,
18:41
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
John Donoghue
,
18:38
[Octave-bug-tracker] [bug #58163] [octave forge] (control) wrong plot using the same code as MATLAB
,
Doug Stewart
,
18:34
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
John Donoghue
,
18:32
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
John Donoghue
,
18:29
[Octave-bug-tracker] [bug #58281] Segmentation fault when calling anonymous function without any arguments
,
anonymous
,
18:09
[Octave-bug-tracker] [bug #58280] cellfun with "ErrorHandler"
,
Rik
,
17:46
[Octave-bug-tracker] [bug #58280] cellfun with "ErrorHandler"
,
Rik
,
17:24
[Octave-bug-tracker] [bug #58279] vararginvarargout
,
Rik
,
17:07
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
Walter Sjursen
,
17:01
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Hg200
,
16:40
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
Walter Sjursen
,
16:06
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Torsten Lilge
,
15:54
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Philip Nienhuis
,
15:22
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Hg200
,
14:45
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
Walter Sjursen
,
12:58
[Octave-bug-tracker] [bug #58280] cellfun with "ErrorHandler"
,
Muhali
,
12:56
[Octave-bug-tracker] [bug #58279] vararginvarargout
,
Muhali
,
12:17
[Octave-bug-tracker] [bug #58266] Error "An illegal reflective access operation has occurred" in Java subsystem
,
Philip Nienhuis
,
06:52
[Octave-bug-tracker] [bug #58274] print.m: -svgconvert doesn't handle switching font angle in a single string
,
Pantxo Diribarne
,
05:56
April 29, 2020
[Octave-bug-tracker] [bug #58274] print.m: -svgconvert doesn't handle switching font angle in a single string
,
Kai Torben Ohlhus
,
23:06
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
John Donoghue
,
21:21
[Octave-bug-tracker] [bug #58274] print.m: -svgconvert doesn't handle switching font angle in a single string
,
Pantxo Diribarne
,
16:16
[Octave-bug-tracker] [bug #58240] [octave-forge] (control) tf2ss returns other state space representation than Matlab
,
Torsten Lilge
,
16:02
[Octave-bug-tracker] [bug #58274] print.m: -svgconvert doesn't handle switching font angle in a single string
,
Pantxo Diribarne
,
15:55
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Torsten Lilge
,
15:55
[Octave-bug-tracker] [bug #54658] Private directory in +package
,
Mike Miller
,
15:18
[Octave-bug-tracker] [bug #54658] Private directory in +package
,
Guillaume
,
15:15
[Octave-bug-tracker] [bug #57490] Translation files for the 6.1.0 release
,
Pantxo Diribarne
,
14:54
[Octave-bug-tracker] [bug #57867] strrep: unexpected substitution behavior on a char array
,
Mike Miller
,
14:06
[Octave-bug-tracker] [bug #58244] [octave forge] (parallel) compilation warnings during build with version 6
,
A.R. Burgers
,
05:51
[Octave-bug-tracker] [bug #58268] hdf5 load crashes on strings
,
Elvis Stansvik
,
05:48
[Octave-bug-tracker] [bug #58268] hdf5 load crashes on strings
,
Elvis Stansvik
,
05:38
[Octave-bug-tracker] [bug #58268] hdf5 load crashes on strings
,
Elvis Stansvik
,
05:25
[Octave-bug-tracker] [bug #58268] hdf5 load crashes on strings
,
Elvis Stansvik
,
05:13
[Octave-bug-tracker] [bug #58271] [octave-forge](parallel) 4.0.0: classdef objects in arguments pose issues
,
A.R. Burgers
,
04:05
[Octave-bug-tracker] [bug #58268] hdf5 load crashes on strings
,
Christian Häggström
,
01:55
April 28, 2020
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
John Donoghue
,
22:11
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
John Donoghue
,
21:58
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
anonymous
,
21:10
[Octave-bug-tracker] [bug #58268] hdf5 load crashes on strings
,
Rik
,
19:26
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
anonymous
,
18:59
[Octave-bug-tracker] [bug #58268] hdf5 load crashes on strings
,
Rik
,
18:39
[Octave-bug-tracker] [bug #58261] Matlab uses [1 1 1] for backgroundcolor of uicontrol Edit objects
,
Rik
,
18:32
[Octave-bug-tracker] [bug #58261] Matlab uses [1 1 1] for backgroundcolor of uicontrol Edit objects
,
Guillaume
,
18:13
[Octave-bug-tracker] [bug #58269] patch with polygons defined by two vertices
,
Guillaume
,
17:54
[Octave-bug-tracker] [bug #58268] hdf5 load crashes on strings
,
Christian Häggström
,
17:47
[Octave-bug-tracker] [bug #58266] Error "An illegal reflective access operation has occurred" in Java subsystem
,
Philip Nienhuis
,
15:15
[Octave-bug-tracker] [bug #58004] [octave-forge] (io) xmlread.m makes Octave crash
,
Philip Nienhuis
,
15:14
[Octave-bug-tracker] [bug #58266] Error "An illegal reflective access operation has occurred" in Java subsystem
,
Philip Nienhuis
,
15:12
[Octave-bug-tracker] [bug #58225] Installing package fails when package was already installed globally
,
Philip Nienhuis
,
05:36
April 27, 2020
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
John Donoghue
,
22:14
[Octave-bug-tracker] [bug #57449] struct2hdl fails to set property with erroneous "invalid value"
,
Rik
,
19:22
[Octave-bug-tracker] [bug #58225] Installing package fails when package was already installed globally
,
John Donoghue
,
18:06
[Octave-bug-tracker] [bug #58261] Matlab uses [1 1 1] for backgroundcolor of uicontrol Edit objects
,
Rik
,
16:43
[Octave-bug-tracker] [bug #58217] webread returns char array instead of struct
,
Mike Miller
,
16:41
[Octave-bug-tracker] [bug #58257] urlwrite 403 Forbidden crashes octave
,
Mike Miller
,
15:55
[Octave-bug-tracker] [bug #58261] Matlab uses [1 1 1] for backgroundcolor of uicontrol Edit objects
,
Pantxo Diribarne
,
15:47
[Octave-bug-tracker] [bug #58257] urlwrite 403 Forbidden crashes octave
,
Dmitri A. Sergatskov
,
15:37
[Octave-bug-tracker] [bug #58257] urlwrite 403 Forbidden crashes octave
,
Dmitri A. Sergatskov
,
15:29
[Octave-bug-tracker] [bug #58257] urlwrite 403 Forbidden crashes octave
,
Mike Miller
,
15:17
[Octave-bug-tracker] [bug #58261] Matlab uses [1 1 1] for backgroundcolor of uicontrol Edit objects
,
Rik
,
15:16
[Octave-bug-tracker] [bug #58257] urlwrite 403 Forbidden crashes octave
,
Dmitri A. Sergatskov
,
15:12
[Octave-bug-tracker] [bug #58250] [octave forge] (parallel) Spelling errors in documentation strings
,
Mike Miller
,
14:55
[Octave-bug-tracker] [bug #58244] [octave forge] (parallel) compilation warnings during build with version 6
,
Mike Miller
,
14:53
[Octave-bug-tracker] [bug #58257] urlwrite 403 Forbidden crashes octave
,
Mike Miller
,
14:35
[Octave-bug-tracker] [bug #58257] urlwrite 403 Forbidden crashes octave
,
Mike Miller
,
14:32
[Octave-bug-tracker] [bug #58261] Matlab uses [1 1 1] for backgroundcolor of uicontrol Edit objects
,
Rik
,
13:20
[Octave-bug-tracker] [bug #58261] Matlab uses [1 1 1] for backgroundcolor of uicontrol Edit objects
,
Guillaume
,
13:09
[Octave-bug-tracker] [bug #58261] Matlab uses [1 1 1] for backgroundcolor of uicontrol Edit objects
,
Rik
,
12:22
[Octave-bug-tracker] [bug #58261] Matlab uses [1 1 1] for backgroundcolor of uicontrol Edit objects
,
Rik
,
12:18
[Octave-bug-tracker] [bug #57128] no visual clue (graying) to enable=off for uicontrols
,
Rik
,
12:18
[Octave-bug-tracker] [bug #58261] Matlab uses [1 1 1] for backgroundcolor of uicontrol Edit objects
,
Rik
,
12:17
[Octave-bug-tracker] [bug #57128] no visual clue (graying) to enable=off for uicontrols
,
Rik
,
12:01
[Octave-bug-tracker] [bug #58257] urlwrite 403 Forbidden crashes octave
,
Rik
,
11:31
[Octave-bug-tracker] [bug #58257] urlwrite 403 Forbidden crashes octave
,
Ben Stanley
,
09:43
[Octave-bug-tracker] [bug #57128] no visual clue (graying) to enable=off for uicontrols
,
Guillaume
,
08:12
[Octave-bug-tracker] [bug #57867] strrep: unexpected substitution behavior on a char array
,
Nicholas Jankowski
,
07:40
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
John Donoghue
,
07:24
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Hg200
,
05:43
[Octave-bug-tracker] [bug #57867] strrep: unexpected substitution behavior on a char array
,
Abdelrhman_Adel_Moawad
,
05:27
[Octave-bug-tracker] [bug #58254] Variable editor could show more details for user classes
,
Markus Mützel
,
02:47
[Octave-bug-tracker] [bug #58236] Typo (german)
,
Kai Torben Ohlhus
,
02:29
[Octave-bug-tracker] [bug #58236] Typo (german)
,
Kai Torben Ohlhus
,
02:28
[Octave-bug-tracker] [bug #58253] MS Windows GUI not opening
,
Kai Torben Ohlhus
,
02:18
[Octave-bug-tracker] [bug #58254] Variable editor doesn't show quaternion elements
,
Rick T
,
02:08
[Octave-bug-tracker] [bug #58253] App not opening
,
jagruthi
,
00:47
April 26, 2020
[Octave-bug-tracker] [bug #58252] [octave forge] (instrument-control) ustmc_read() does not read all the waveform data from oscilloscope
,
Kai Torben Ohlhus
,
22:21
[Octave-bug-tracker] [bug #57128] no visual clue (graying) to enable=off for uicontrols
,
Rik
,
20:55
[Octave-bug-tracker] [bug #57699] [Feature Request] 'clipboard' function to interact with clipboard contents
,
Abdallah Khaled Elshamy
,
20:30
[Octave-bug-tracker] [bug #58252] Instrument-control ustmc_read() does not read all the waveform data from oscilloscope
,
anonymous
,
20:05
[Octave-bug-tracker] [bug #58252] Instrument-control ustmc_read() does not read all the waveform data from oscilloscope
,
anonymous
,
19:44
[Octave-bug-tracker] [bug #57128] no visual clue (graying) to enable=off for uicontrols
,
Guillaume
,
19:06
[Octave-bug-tracker] [bug #57128] no visual clue (graying) to enable=off for uicontrols
,
Rik
,
18:12
[Octave-bug-tracker] [bug #57128] no visual clue (graying) to enable=off for uicontrols
,
Rik
,
17:39
[Octave-bug-tracker] [bug #58186] Vertical scrollbar with an inactive Edit uicontrol
,
Guillaume
,
17:34
[Octave-bug-tracker] [bug #58250] [octave forge] (parallel) Spelling errors in documentation strings
,
Rafael Laboissiere
,
16:26
[Octave-bug-tracker] [bug #58240] [octave-forge] (control) tf2ss returns other state space representation than Matlab
,
Torsten Lilge
,
14:37
[Octave-bug-tracker] [bug #58236] Typo (german)
,
Torsten Lilge
,
14:19
[Octave-bug-tracker] [bug #58236] Typo (german)
,
POLUPARTHI BHANU PRAKASH
,
14:15
[Octave-bug-tracker] [bug #58236] Typo (german)
,
POLUPARTHI BHANU PRAKASH
,
13:54
[Octave-bug-tracker] [bug #58240] [octave-forge] (control) tf2ss returns other state space representation than Matlab
,
Doug Stewart
,
13:51
[Octave-bug-tracker] [bug #57128] no visual clue (graying) to enable=off for uicontrols
,
Rik
,
13:50
[Octave-bug-tracker] [bug #58236] Typo (german)
,
POLUPARTHI BHANU PRAKASH
,
13:49
[Octave-bug-tracker] [bug #58186] Vertical scrollbar with an inactive Edit uicontrol
,
Rik
,
13:42
[Octave-bug-tracker] [bug #58240] [octave-forge] (control) tf2ss returns other state space representation than Matlab
,
Torsten Lilge
,
11:55
[Octave-bug-tracker] [bug #58240] [octave-forge] (control) tf2ss returns other state space representation than Matlab
,
Aleksandar
,
10:40
[Octave-bug-tracker] [bug #58240] [octave-forge] (control) tf2ss returns other state space representation than Matlab
,
Doug Stewart
,
09:31
[Octave-bug-tracker] [bug #58240] [octave-forge] (control) tf2ss returns other state space representation than Matlab
,
Torsten Lilge
,
08:06
[Octave-bug-tracker] [bug #58240] [octave-forge] (control) Function tf2ss in Octave returns wrong result (in Matlab same function works OK)
,
Torsten Lilge
,
06:37
[Octave-bug-tracker] [bug #58238] [octave forge] (parallel) 4.0.0 can't find command line functions
,
Mark van Rossum
,
05:26
[Octave-bug-tracker] [bug #58186] Vertical scrollbar with an inactive Edit uicontrol
,
Guillaume
,
04:27
[Octave-bug-tracker] [bug #58244] [octave-forge](parallel) 4.0.0: compilation warnings during build with 6.0.1
,
A.R. Burgers
,
04:06
April 25, 2020
[Octave-bug-tracker] [bug #57128] no visual clue (graying) to enable=off for uicontrols
,
Rik
,
22:52
[Octave-bug-tracker] [bug #58186] Vertical scrollbar with an inactive Edit uicontrol
,
Rik
,
22:50
[Octave-bug-tracker] [bug #58239] Latex interpreter introduces extra spaces
,
Rik
,
22:43
[Octave-bug-tracker] [bug #58239] Latex interpreter introduces extra spaces
,
Rik
,
22:42
[Octave-bug-tracker] [bug #58239] Latex interpreter introduces extra spaces
,
Pantxo Diribarne
,
22:25
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Rik
,
17:36
[Octave-bug-tracker] [bug #57128] no visual clue (graying) to enable=off for uicontrols
,
Guillaume
,
16:53
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Nicholas Jankowski
,
16:24
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Philip Nienhuis
,
15:30
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Rik
,
14:57
[Octave-bug-tracker] [bug #58238] [octave forge] (parallel) 4.0.0 can't find command line functions
,
Olaf Till
,
13:22
[Octave-bug-tracker] [bug #58240] [octave-forge] (control) Function tf2ss in Octave returns wrong result (in Matlab same function works OK)
,
Aleksandar
,
13:00
[Octave-bug-tracker] [bug #58163] [octave forge] (control) wrong plot using the same code as MATLAB
,
Mike Miller
,
12:18
[Octave-bug-tracker] [bug #58198] Comments not being parsed correctly in REPL
,
Mike Miller
,
12:08
[Octave-bug-tracker] [bug #58238] [octave forge] (parallel) 4.0.0 can't find command line functions
,
Mike Miller
,
11:34
[Octave-bug-tracker] [bug #58240] [octave-forge] (control) Function tf2ss in Octave returns wrong result (in Matlab same function works OK)
,
John W. Eaton
,
11:27
[Octave-bug-tracker] [bug #58240] Function tf2ss in Octave returns wrong result (in Matlab same function works OK)
,
Doug Stewart
,
11:21
[Octave-bug-tracker] [bug #58240] Function tf2ss in Octave returns wrong result (in Matlab same function works OK)
,
anonymous
,
10:59
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Hg200
,
08:50
[Octave-bug-tracker] [bug #58239] Latex interpreter introduces extra spaces
,
Tunc
,
08:26
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Torsten Lilge
,
08:03
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Philip Nienhuis
,
07:16
[Octave-bug-tracker] [bug #58237] Imwrite fails to write 16 bit data
,
Pantxo Diribarne
,
07:15
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Philip Nienhuis
,
04:46
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Hg200
,
03:36
April 24, 2020
[Octave-bug-tracker] [bug #58186] Vertical scrollbar with an inactive Edit uicontrol
,
Rik
,
20:01
[Octave-bug-tracker] [bug #57128] no visual clue (graying) to enable=off for uicontrols
,
Rik
,
19:19
[Octave-bug-tracker] [bug #58238] Octave forge parallel 4.0.0 can't find local functions
,
Mark van Rossum
,
18:14
[Octave-bug-tracker] [bug #58238] Octave forge parallel 4.0.0 can't find local functions
,
Mark van Rossum
,
18:13
[Octave-bug-tracker] [bug #58215] sparse multiplication with Inf
,
Guillaume
,
17:13
[Octave-bug-tracker] [bug #50854] zeros, ones, NaN, Inf, NA: "like" keyword
,
Markus Mützel
,
14:40
[Octave-bug-tracker] [bug #50854] zeros, ones, NaN, Inf, NA: "like" keyword
,
Markus Mützel
,
14:12
[Octave-bug-tracker] [bug #58237] Imwrite fails to write 16 bit data
,
anonymous
,
12:47
[Octave-bug-tracker] [bug #58186] Vertical scrollbar with an inactive Edit uicontrol
,
Rik
,
12:27
[Octave-bug-tracker] [bug #58228] "axis equal" for patch objects would look better if axis limits included entire patch
,
Rik
,
12:26
[Octave-bug-tracker] [bug #58228] "axis equal" for patch objects would look better if axis limits included entire patch
,
Rik
,
12:25
[Octave-bug-tracker] [bug #58215] sparse multiplication with Inf
,
Rik
,
12:16
[Octave-bug-tracker] [bug #58236] Typo (german)
,
anonymous
,
10:41
[Octave-bug-tracker] [bug #57865] Builtin is not calling the built in version
,
anonymous
,
10:41
[Octave-bug-tracker] [bug #58215] sparse multiplication with Inf
,
Guillaume
,
09:22
[Octave-bug-tracker] [bug #58235] [octave-forge](io) xlsopen does not work with UNO interface
,
Philip Nienhuis
,
05:40
[Octave-bug-tracker] [bug #58225] Installing package fails when package was already installed globally
,
Philip Nienhuis
,
05:24
[Octave-bug-tracker] [bug #58186] Vertical scrollbar with an inactive Edit uicontrol
,
Guillaume
,
05:08
[Octave-bug-tracker] [bug #58235] xlsopen does not work
,
anonymous
,
05:01
[Octave-bug-tracker] [bug #58228] axis equal for patch truncates axes
,
Muhali
,
04:08
April 23, 2020
[Octave-bug-tracker] [bug #58186] Vertical scrollbar with an inactive Edit uicontrol
,
Rik
,
21:31
[Octave-bug-tracker] [bug #57685] legend misplaced when pbaspect() used
,
Rik
,
19:33
[Octave-bug-tracker] [bug #58228] axis equal for patch truncates axes
,
anonymous
,
17:31
[Octave-bug-tracker] [bug #58228] axis equal for patch truncates axes
,
Rik
,
16:47
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Torsten Lilge
,
14:16
[Octave-bug-tracker] [bug #58109] Editor: highlighted/selected text removed on focus change
,
Guillaume
,
10:36
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Hg200
,
08:13
[Octave-bug-tracker] [bug #58228] axis equal for patch truncates axes
,
Muhali
,
04:37
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Hg200
,
03:48
[Octave-bug-tracker] [bug #58225] Installing package fails when package was already installed globally
,
Markus Mützel
,
03:06
[Octave-bug-tracker] [bug #58045] [octave forge] (io) odsread error
,
Philip Nienhuis
,
01:59
April 22, 2020
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Rik
,
20:40
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Rik
,
20:21
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Rik
,
20:09
[Octave-bug-tracker] [bug #52840] GUI hangs on use of uiputfile
,
Rik
,
18:38
[Octave-bug-tracker] [bug #52840] GUI hangs on use of uigetfile/uiputfile
,
Andrew Janke
,
16:50
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Torsten Lilge
,
16:17
[Octave-bug-tracker] [bug #57867] strrep: unexpected substitution behavior on a char array
,
Abdelrhman_Adel_Moawad
,
15:32
[Octave-bug-tracker] [bug #58225] Installing package fails when package was already installed globally
,
Philip Nienhuis
,
13:56
[Octave-bug-tracker] [bug #52840] GUI hangs on use of uigetfile/uiputfile
,
Rik
,
13:53
[Octave-bug-tracker] [bug #58225] Installing package fails when package was already installed globally
,
Markus Mützel
,
12:05
[Octave-bug-tracker] [bug #58225] Installing package fails when package was already installed globally
,
Rik
,
10:56
[Octave-bug-tracker] [bug #58225] Installing package fails when package was already instaledd globally
,
John Donoghue
,
08:31
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Hg200
,
03:56
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Torsten Lilge
,
01:21
April 21, 2020
[Octave-bug-tracker] [bug #57867] strrep: unexpected substitution behavior on a char array
,
Nicholas Jankowski
,
22:12
[Octave-bug-tracker] [bug #58224] HorizontalAlignment property of uicontrol Edit not recognized when Max property is not 1
,
Rik
,
21:22
[Octave-bug-tracker] [bug #58144] "Cdata" icon for UIcontrol is incorrectly sized
,
Rik
,
20:08
[Octave-bug-tracker] [bug #58224] HorizontalAlignment property of uicontrol Edit not recognized when Max property is not 1
,
Guillaume
,
17:47
[Octave-bug-tracker] [bug #58186] Vertical scrollbar with an inactive Edit uicontrol
,
Guillaume
,
17:20
[Octave-bug-tracker] [bug #58144] "Cdata" icon for UIcontrol is incorrectly sized
,
Guillaume
,
15:18
[Octave-bug-tracker] [bug #58127] -append does not automatically detect/check file type for save
,
Rik
,
13:35
[Octave-bug-tracker] [bug #58216] bar: stacked bar chart improperly handles negative values
,
Nicholas Jankowski
,
12:56
[Octave-bug-tracker] [bug #58218] [octave forge] (signal) cheb2ap function - 'Rs' undefined error
,
Markus Mützel
,
12:48
[Octave-bug-tracker] [bug #58219] [octave forge] (signal) remez help and online docs incorrectly describe n
,
Markus Mützel
,
12:40
[Octave-bug-tracker] [bug #58216] bar: stacked bar chart improperly handles negative values
,
Rik
,
12:39
[Octave-bug-tracker] [bug #58216] bar: stacked bar chart improperly handles negative values
,
Nicholas Jankowski
,
11:40
[Octave-bug-tracker] [bug #58216] bar: stacked bar chart improperly handles negative values
,
Nicholas Jankowski
,
11:38
[Octave-bug-tracker] [bug #58216] bar: stacked bar chart improperly handles negative values
,
Rik
,
11:26
[Octave-bug-tracker] [bug #58219] remez help and online docs incorrectly describe n
,
Rik
,
11:20
[Octave-bug-tracker] [bug #58218] cheb2ap function - 'Rs' undefined error
,
Rik
,
11:18
[Octave-bug-tracker] [bug #57867] strrep: unexpected substitution behavior on a char array
,
Abdelrhman_Adel_Moawad
,
11:12
[Octave-bug-tracker] [bug #57867] strrep: unexpected substitution behavior on a char array
,
Abdelrhman_Adel_Moawad
,
11:06
[Octave-bug-tracker] [bug #57867] strrep: unexpected substitution behavior on a char array
,
Nicholas Jankowski
,
10:33
[Octave-bug-tracker] [bug #57867] strrep: unexpected substitution behavior on a char array
,
Abdelrhman_Adel_Moawad
,
10:28
[Octave-bug-tracker] [bug #41148] [octave forge] (parallel) fails to build in windows/mingw
,
Olaf Till
,
09:50
[Octave-bug-tracker] [bug #47478] [octave forge] (parallel) parcellfun() hangs when used with @fft2()
,
Olaf Till
,
09:47
[Octave-bug-tracker] [bug #49532] [octave forge] (parallel) segmentation fault on matrix multiplication on macOS
,
Olaf Till
,
09:35
[Octave-bug-tracker] [bug #58219] remez help and online docs incorrectly describe n
,
anonymous
,
08:42
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Hg200
,
08:04
[Octave-bug-tracker] [bug #58218] cheb2ap function - 'Rs' undefined error
,
Михаил
,
05:08
[Octave-bug-tracker] [bug #58188] Font in the documentation is rendered really bad. Almost unreadable
,
Pantxo Diribarne
,
04:07
[Octave-bug-tracker] [bug #58188] Font in the documentation is rendered really bad. Almost unreadable
,
anonymous
,
02:09
April 20, 2020
[Octave-bug-tracker] [bug #58127] -append does not automatically detect/check file type for save
,
Rik
,
23:55
[Octave-bug-tracker] [bug #58127] -append does not automatically detect/check file type for save
,
Rik
,
23:38
[Octave-bug-tracker] [bug #58217] webread returns char array instead of struct
,
Rik
,
23:14
[Octave-bug-tracker] [bug #58186] Vertical scrollbar with an inactive Edit uicontrol
,
Rik
,
15:01
[Octave-bug-tracker] [bug #58216] bar: stacked bar chart improperly handles negative values
,
Rik
,
14:48
[Octave-bug-tracker] [bug #58216] bar: stacked bar chart improperly handles negative values
,
Nicholas Jankowski
,
14:04
[Octave-bug-tracker] [bug #58216] bar: stacked bar chart improperly handles negative values
,
John W. Eaton
,
13:58
[Octave-bug-tracker] [bug #58215] sparse multiplication with Inf
,
Rik
,
13:36
[Octave-bug-tracker] [bug #58217] webread returns char array instead of struct
,
Dora Kocsis
,
13:24
[Octave-bug-tracker] [bug #58216] bar: stacked bar chart improperly handles negative values
,
Nicholas Jankowski
,
13:12
[Octave-bug-tracker] [bug #58144] "Cdata" icon for UIcontrol is incorrectly sized
,
Rik
,
13:07
[Octave-bug-tracker] [bug #58216] bar: stacked bar chart improperly handles negative values
,
Nicholas Jankowski
,
12:23
[Octave-bug-tracker] [bug #58216] bar: stacked bar chart improperly handles negative values
,
Nicholas Jankowski
,
12:16
[Octave-bug-tracker] [bug #58215] sparse multiplication with Inf
,
John W. Eaton
,
12:11
[Octave-bug-tracker] [bug #58215] sparse multiplication with Inf
,
Guillaume
,
12:08
[Octave-bug-tracker] [bug #58215] sparse multiplication with Inf
,
Guillaume
,
12:02
[Octave-bug-tracker] [bug #58215] sparse multiplication with Inf
,
Guillaume
,
11:40
[Octave-bug-tracker] [bug #58207] Error message on start up for new Win 10 installation
,
Kai Torben Ohlhus
,
01:30
April 19, 2020
[Octave-bug-tracker] [bug #58207] Error message on start up for new Win 10 installation
,
anonymous
,
15:00
April 18, 2020
[Octave-bug-tracker] [bug #58196] uitoggletool not listed in struct2hdl
,
Rik
,
20:36
[Octave-bug-tracker] [bug #58144] "Cdata" icon for UIcontrol is incorrectly sized
,
Rik
,
20:29
[Octave-bug-tracker] [bug #58144] "Cdata" icon for UIcontrol is incorrectly sized
,
Rik
,
16:37
[Octave-bug-tracker] [bug #58198] Comments not being parsed correctly in REPL
,
anonymous
,
11:58
[Octave-bug-tracker] [bug #58198] Comments not being parsed correctly in REPL
,
Pantxo Diribarne
,
10:50
[Octave-bug-tracker] [bug #58198] Comments not being parsed correctly in REPL
,
Michael Godfrey
,
08:29
[Octave-bug-tracker] [bug #58198] Comments not being parsed correctly in REPL
,
Pantxo Diribarne
,
08:22
[Octave-bug-tracker] [bug #58198] Comments not being parsed correctly in REPL
,
Philip Nienhuis
,
07:34
April 17, 2020
[Octave-bug-tracker] [bug #55816] Laggy file browser
,
anonymous
,
18:22
[Octave-bug-tracker] [bug #58198] Comments not being parsed correctly in REPL
,
Pantxo Diribarne
,
14:36
[Octave-bug-tracker] [bug #58198] Comments not being parsed correctly in REPL
,
anonymous
,
13:03
[Octave-bug-tracker] [bug #57969] ctrl-shortcuts suddenly stop working in editor
,
nope
,
11:35
[Octave-bug-tracker] [bug #58196] uitoggletool not listed in struct2hdl
,
Guillaume
,
10:29
[Octave-bug-tracker] [bug #58148] canonicalize_file_name does not return correctly capitalized path on Windows
,
Philip Nienhuis
,
02:37
April 16, 2020
[Octave-bug-tracker] [bug #58144] "Cdata" icon for UIcontrol is incorrectly sized
,
Rik
,
18:05
[Octave-bug-tracker] [bug #58144] "Cdata" icon for UIcontrol is incorrectly sized
,
Rik
,
17:07
[Octave-bug-tracker] [bug #58144] "Cdata" icon for UIcontrol is incorrectly sized
,
Guillaume
,
16:21
[Octave-bug-tracker] [bug #58144] "Cdata" icon for UIcontrol is incorrectly sized
,
Rik
,
15:54
[Octave-bug-tracker] [bug #58144] "Cdata" icon for UIcontrol is incorrectly sized
,
Rik
,
14:05
[Octave-bug-tracker] [bug #53992] [octave forge] (queueing) wrong math construct in texinfo documentation
,
Markus Mützel
,
08:12
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
Markus Mützel
,
08:09
[Octave-bug-tracker] [bug #57033] Replace CXSPARSE with SPQR
,
Markus Mützel
,
08:03
[Octave-bug-tracker] [bug #57033] Replace CXSPARSE with SPQR
,
Simon
,
06:06
[Octave-bug-tracker] [bug #58189] Roughly 1 out of 3 times after start abort() gets called
,
anonymous
,
05:22
[Octave-bug-tracker] [bug #53992] [octave forge] (queueing) wrong math construct in texinfo documentation
,
Rafael Laboissiere
,
04:23
April 15, 2020
[Octave-bug-tracker] [bug #58181] MATLAB function getpixelposition() missing
,
Pantxo Diribarne
,
16:22
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
John W. Eaton
,
15:37
[Octave-bug-tracker] [bug #58181] MATLAB function getpixelposition() missing
,
Pantxo Diribarne
,
14:58
[Octave-bug-tracker] [bug #57041] Missing Matlab functions: startsWith and endsWith
,
Markus Mützel
,
14:55
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
Markus Mützel
,
14:41
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Torsten Lilge
,
14:11
[Octave-bug-tracker] [bug #58181] MATLAB function getpixelposition() missing
,
Guillaume
,
11:40
[Octave-bug-tracker] [bug #58186] Vertical scrollbar with an inactive Edit uicontrol
,
Guillaume
,
10:10
[Octave-bug-tracker] [bug #58181] MATLAB function getpixelposition() missing
,
Kai Torben Ohlhus
,
02:12
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
John W. Eaton
,
00:39
April 14, 2020
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
John W. Eaton
,
23:35
[Octave-bug-tracker] [bug #58159] Octave GUI closes shortly after opening - signal 6
,
Lee Strobel
,
22:11
[Octave-bug-tracker] [bug #35178] griddata: cubic interpolation not yet implemented
,
Nicholas Jankowski
,
16:49
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Philip Nienhuis
,
16:19
[Octave-bug-tracker] [bug #58144] "Cdata" icon for UIcontrol is incorrectly sized
,
Rik
,
16:17
[Octave-bug-tracker] [bug #58144] Cdata for UIcontrol is not properly implemented
,
Rik
,
16:16
[Octave-bug-tracker] [bug #58181] MATLAB function getpixelposition() missing
,
anonymous
,
16:07
[Octave-bug-tracker] [bug #41298] pkg install: automatically extract %!tests and install both extracted and fixed test files
,
Philip Nienhuis
,
16:02
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Torsten Lilge
,
15:12
[Octave-bug-tracker] [bug #45706] Unable to load -v7.3 MAT-file containing cells
,
Rik
,
14:12
[Octave-bug-tracker] [bug #57902] Confusing debug output from commands executed with "Run Selection"
,
Philip Nienhuis
,
12:58
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Philip Nienhuis
,
12:56
[Octave-bug-tracker] [bug #58163] Octave has a wrong plot using the same code as MATLAB.
,
Doug Stewart
,
12:46
[Octave-bug-tracker] [bug #35178] griddata: cubic interpolation not yet implemented
,
Rik
,
12:30
April 13, 2020
[Octave-bug-tracker] [bug #35178] griddata: cubic interpolation not yet implemented
,
Nicholas Jankowski
,
17:10
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
John W. Eaton
,
15:14
[Octave-bug-tracker] [bug #57041] Missing Matlab functions: startsWith and endsWith
,
Abdallah Khaled Elshamy
,
14:46
[Octave-bug-tracker] [bug #58167] graphic handle error of barh in subplot
,
Rik
,
12:55
[Octave-bug-tracker] [bug #35178] griddata: cubic interpolation not yet implemented
,
Rik
,
12:33
[Octave-bug-tracker] [bug #33539] griddata does not support 'v4' method
,
Rik
,
12:12
[Octave-bug-tracker] [bug #58127] save -V7 and -append error
,
Liang Tang
,
11:05
[Octave-bug-tracker] [bug #58167] graphic handle error of barh in subplot
,
Liang Tang
,
10:53
[Octave-bug-tracker] [bug #58159] Octave GUI closes shortly after opening - signal 6
,
Mark van Rossum
,
10:51
[Octave-bug-tracker] [bug #57041] Missing Matlab functions: startsWith and endsWith
,
Markus Mützel
,
07:18
April 12, 2020
[Octave-bug-tracker] [bug #33539] griddata does not support 'v4' method
,
Rik
,
21:30
[Octave-bug-tracker] [bug #58163] Octave has a wrong plot using the same code as MATLAB.
,
anonymous
,
21:07
[Octave-bug-tracker] [bug #58159] Octave GUI closes shortly after opening - signal 6
,
Lee Strobel
,
20:12
[Octave-bug-tracker] [bug #57774] fullfile error with cell array input other than last
,
Markus Mützel
,
13:48
[Octave-bug-tracker] [bug #58163] Octave has a wrong plot using the same code as MATLAB.
,
anonymous
,
13:19
[Octave-bug-tracker] [bug #58159] Octave GUI closes shortly after opening - signal 6
,
Mark van Rossum
,
12:27
[Octave-bug-tracker] [bug #58159] Octave GUI closes shortly after opening - signal 6
,
Lee Strobel
,
11:47
[Octave-bug-tracker] [bug #58163] Octave has a wrong plot using the same code as MATLAB.
,
Doug Stewart
,
11:34
[Octave-bug-tracker] [bug #58163] Octave has a wrong plot using the same code as MATLAB.
,
anonymous
,
10:52
April 11, 2020
[Octave-bug-tracker] [bug #57143] print ('-tight', 'q.eps') produces no file
,
Rik
,
19:28
[Octave-bug-tracker] [bug #58150] Slow loglog plot with non-default font
,
Rik
,
19:14
[Octave-bug-tracker] [bug #58148] canonicalize_file_name does not return correctly capitalized path on Windows
,
Markus Mützel
,
14:49
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
Markus Mützel
,
13:14
[Octave-bug-tracker] [bug #58159] Octave GUI closes shortly after opening - signal 6
,
John W. Eaton
,
12:18
[Octave-bug-tracker] [bug #58150] Slow loglog plot with non-default font
,
Guillaume
,
10:28
[Octave-bug-tracker] [bug #58150] Slow loglog plot with non-default font
,
Pantxo Diribarne
,
10:20
[Octave-bug-tracker] [bug #58159] Octave GUI closes shortly after opening - signal 6
,
Mark van Rossum
,
10:05
[Octave-bug-tracker] [bug #58052] [octave forge] (parallel) problem with random number initialization
,
Mark van Rossum
,
09:34
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
John W. Eaton
,
09:02
[Octave-bug-tracker] [bug #58150] Slow loglog plot with non-default font
,
Pantxo Diribarne
,
09:01
[Octave-bug-tracker] [bug #55816] Laggy file browser
,
Philip Nienhuis
,
06:59
[Octave-bug-tracker] [bug #58159] Octave GUI closes shortly after opening - signal 6
,
anonymous
,
06:50
[Octave-bug-tracker] [bug #56477] [octave forge] (parallel) installation error 'command_editor', 'octave_env' has not been declared
,
Olaf Till
,
05:48
[Octave-bug-tracker] [bug #58052] [octave forge] (parallel) problem with random number initialization
,
Olaf Till
,
05:45
[Octave-bug-tracker] [bug #57955] [octave forge] (parallel) build complains about missing -fPIC flag at link stage
,
Olaf Till
,
05:42
[Octave-bug-tracker] [bug #57955] [octave forge] (parallel) build complains about missing -fPIC flag at link stage
,
Olaf Till
,
05:41
[Octave-bug-tracker] [bug #57143] print ('-tight', 'q.eps') produces no file
,
Kai Torben Ohlhus
,
02:20
[Octave-bug-tracker] [bug #55816] Laggy file browser
,
Dan Sebald
,
02:16
[Octave-bug-tracker] [bug #57143] print ('-tight', 'q.eps') produces no file
,
Kai Torben Ohlhus
,
02:13
April 10, 2020
[Octave-bug-tracker] [bug #58150] Slow loglog plot with non-default font
,
Rik
,
20:09
[Octave-bug-tracker] [bug #58150] Slow loglog plot with non-default font
,
Rik
,
20:01
[Octave-bug-tracker] [bug #58150] Slow loglog plot with non-default font
,
Rik
,
19:48
[Octave-bug-tracker] [bug #58150] Slow loglog plot with non-default font
,
Rik
,
19:41
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
Rik
,
19:36
[Octave-bug-tracker] [bug #55816] Laggy file browser
,
SillyMon
,
18:19
[Octave-bug-tracker] [bug #55816] Laggy file browser
,
SillyMon
,
18:14
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Nicholas Jankowski
,
16:26
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
John W. Eaton
,
16:19
[Octave-bug-tracker] [bug #58150] Slow loglog plot with non-default font
,
Guillaume
,
16:08
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Nicholas Jankowski
,
14:44
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Mike Miller
,
13:55
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Philip Nienhuis
,
10:04
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Torsten Lilge
,
08:57
[Octave-bug-tracker] [bug #57902] Confusing debug output from commands executed with "Run Selection"
,
Philip Nienhuis
,
08:21
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Philip Nienhuis
,
08:13
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Torsten Lilge
,
07:35
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Philip Nienhuis
,
06:15
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Philip Nienhuis
,
06:02
[Octave-bug-tracker] [bug #57969] ctrl-shortcuts suddenly stop working in editor
,
Philip Nienhuis
,
05:58
[Octave-bug-tracker] [bug #57969] ctrl-shortcuts suddenly stop working in editor
,
Philip Nienhuis
,
05:55
April 09, 2020
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Nicholas Jankowski
,
23:43
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Nicholas Jankowski
,
23:41
[Octave-bug-tracker] [bug #58151] find(1:3, list) returns indices greater than length(list)
,
Rik
,
22:44
[Octave-bug-tracker] [bug #58089] [Feature Request] sum along multiple dimensions
,
Rik
,
22:03
[Octave-bug-tracker] [bug #58151] find(1:3, list) returns indices greater than length(list)
,
Doug Strain
,
21:24
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
Rik
,
19:44
[Octave-bug-tracker] [bug #58150] Slow loglog plot with non-default font
,
Dmitri A. Sergatskov
,
19:37
[Octave-bug-tracker] [bug #58150] Slow loglog plot with non-default font
,
Rik
,
19:31
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Rik
,
19:29
[Octave-bug-tracker] [bug #57143] print ('-tight', 'q.eps') produces no file
,
Rik
,
19:25
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Hg200
,
18:44
[Octave-bug-tracker] [bug #58089] [Feature Request] sum along multiple dimensions
,
Guillaume
,
18:14
[Octave-bug-tracker] [bug #58089] [Feature Request] sum along multiple dimensions
,
Rik
,
17:39
[Octave-bug-tracker] [bug #58089] [Feature Request] sum along multiple dimensions
,
Guillaume
,
17:28
[Octave-bug-tracker] [bug #58150] Slow loglog plot with non-default font
,
Guillaume
,
17:25
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Philip Nienhuis
,
16:35
[Octave-bug-tracker] [bug #33539] griddata does not support 'v4' method
,
Nicholas Jankowski
,
16:24
[Octave-bug-tracker] [bug #33539] griddata does not support 'v4' method
,
Nicholas Jankowski
,
16:23
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
John W. Eaton
,
15:26
[Octave-bug-tracker] [bug #58105] isfield needs time proportional to number of fields
,
anonymous
,
14:46
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Hg200
,
14:44
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
John W. Eaton
,
13:52
[Octave-bug-tracker] [bug #58127] save -V7 and -append error
,
Mike Miller
,
13:10
[Octave-bug-tracker] [bug #58118] canonicalize_file_name does not return empty for non-existent files
,
Markus Mützel
,
12:20
[Octave-bug-tracker] [bug #58148] canonicalize_file_name does not return correctly capitalized path on Windows
,
Markus Mützel
,
12:17
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Nicholas Jankowski
,
12:10
[Octave-bug-tracker] [bug #58147] Matlab 2020 compatibility: dec2bin, dec2hex shouldn't error on negative inputs
,
Nicholas Jankowski
,
12:06
[Octave-bug-tracker] [bug #58118] canonicalize_file_name does not return empty for non-existent files
,
Rik
,
11:25
[Octave-bug-tracker] [bug #58144] Cdata for UIcontrol is not properly implemented
,
Rik
,
11:19
[Octave-bug-tracker] [bug #58055] ftell() incorrect on MS Windows platforms if file is not encoded with CRLF line endings
,
Rik
,
11:15
[Octave-bug-tracker] [bug #58118] canonicalize_file_name does not return empty for non-existent files
,
Philip Nienhuis
,
10:55
[Octave-bug-tracker] [bug #58109] Editor: highlighted/selected text removed on focus change
,
MB
,
06:12
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Philip Nienhuis
,
04:33
[Octave-bug-tracker] [bug #58055] fgetl() reads in beyond newline according to following ftell()
,
Toby
,
03:38
[Octave-bug-tracker] [bug #58055] fgetl() reads in beyond newline according to following ftell()
,
Toby
,
03:36
April 08, 2020
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
Hg200
,
15:40
[Octave-bug-tracker] [bug #58134] Very unhelpful error message when calling a script with an error
,
John W. Eaton
,
15:29
[Octave-bug-tracker] [bug #58134] Very unhelpful error message when calling a script with an error
,
Doug Strain
,
14:15
[Octave-bug-tracker] [bug #57635] Editor often has focus but no cursor until clicking elsewhere and then clicking in editor
,
anonymous
,
11:10
April 07, 2020
[Octave-bug-tracker] [bug #58118] canonicalize_file_name does not return empty for non-existent files
,
Rik
,
21:00
[Octave-bug-tracker] [bug #58134] Very unhelpful error message when calling a script with an error
,
Rik
,
21:00
[Octave-bug-tracker] [bug #58055] fgetl() reads in beyond newline according to following ftell()
,
Rik
,
20:52
[Octave-bug-tracker] [bug #58127] save -V7 and -append error
,
Liang Tang
,
17:36
[Octave-bug-tracker] [bug #58127] save -V7 and -append error
,
Mike Miller
,
17:03
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Kai Torben Ohlhus
,
12:51
[Octave-bug-tracker] [bug #58126] [octave forge] (generate_html) produces duplicate figures
,
Kai Torben Ohlhus
,
12:44
[Octave-bug-tracker] [bug #58134] Very unhelpful error message when calling a script with an error
,
Doug Strain
,
12:19
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Eli Chan
,
09:44
[Octave-bug-tracker] [bug #58127] save -V7 and -append error
,
Liang Tang
,
08:08
[Octave-bug-tracker] [bug #57982] [octave forge] (optim) error message in nonlin_min for a simple problem
,
anonymous
,
07:57
[Octave-bug-tracker] [bug #58118] canonicalize_file_name does not return empty for non-existent files
,
Markus Mützel
,
03:24
April 06, 2020
[Octave-bug-tracker] [bug #58127] save -V7 and -append error
,
Rik
,
20:35
[Octave-bug-tracker] [bug #57552] Marker sizes in OpenGL raster plots (png, jpg, etc.) are larger than onscreen
,
Rik
,
20:34
[Octave-bug-tracker] [bug #58126] [octave forge] (generate_html) produces duplicate figures
,
Mike Miller
,
20:00
[Octave-bug-tracker] [bug #58118] canonicalize_file_name does not return empty for non-existent files
,
Mike Miller
,
18:53
[Octave-bug-tracker] [bug #58127] save -V7 and -append error
,
Mike Miller
,
18:52
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Eli Chan
,
18:04
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Eli Chan
,
17:31
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Dmitri A. Sergatskov
,
17:08
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Dmitri A. Sergatskov
,
16:59
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Mike Miller
,
16:53
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Eli Chan
,
16:29
[Octave-bug-tracker] [bug #58127] save -V7 and -append error
,
Liang Tang
,
14:36
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Pantxo Diribarne
,
14:26
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Dmitri A. Sergatskov
,
13:22
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Eli Chan
,
13:06
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Eli Chan
,
12:58
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Eli Chan
,
12:51
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Eli Chan
,
12:45
[Octave-bug-tracker] [bug #58118] canonicalize_file_name does not return empty for non-existent files
,
Philip Nienhuis
,
12:02
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Pantxo Diribarne
,
11:53
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Dmitri A. Sergatskov
,
11:51
[Octave-bug-tracker] [bug #58126] generate_html produces duplicate figures
,
anonymous
,
10:16
[Octave-bug-tracker] [bug #58125] rgb2gray causes high cpu and will run forever without any errors
,
Eli Chan
,
10:01
[Octave-bug-tracker] [bug #58109] Editor: highlighted/selected text removed on focus change
,
cn0
,
08:40
[Octave-bug-tracker] [bug #58082] [MXE Octave] installer does not run pkg rebuild automatically on install
,
A.R. Burgers
,
03:24
[Octave-bug-tracker] [bug #58118] canonicalize_file_name does not return empty for non-existent files
,
Markus Mützel
,
03:13
April 05, 2020
[Octave-bug-tracker] [bug #58118] canonicalize_file_name doesn't not return empty for non-existent files
,
Kai Torben Ohlhus
,
23:36
[Octave-bug-tracker] [bug #58109] Editor: highlighted/selected text removed on focus change
,
Kai Torben Ohlhus
,
23:19
[Octave-bug-tracker] [bug #56936] format short displays 6, rather than 5, significant digits as documented
,
Robert Jenssen
,
19:26
[Octave-bug-tracker] [bug #58120] legend() causes most of the plot to be drawn offscreen:
,
Pantxo Diribarne
,
18:10
[Octave-bug-tracker] [bug #58118] canonicalize_file_name doesn't not return empty for non-existent files
,
Rik
,
18:06
[Octave-bug-tracker] [bug #58112] inputParser error while handling cell array as optional argument
,
Rik
,
18:00
[Octave-bug-tracker] [bug #58110] Specified fonts not rendered in pdf output with gnuplot toolkit
,
INVALID.NOREPLY
,
13:36
[Octave-bug-tracker] [bug #58119] isa() does not respect interfaces inherited from superclasses for Java objects
,
Andrew Janke
,
13:05
[Octave-bug-tracker] [bug #58119] isa() does not respect interfaces inherited from superclasses for Java objects
,
Andrew Janke
,
13:01
[Octave-bug-tracker] [bug #58110] Specified fonts not rendered in pdf output with gnuplot toolkit
,
Dmitri A. Sergatskov
,
12:59
[Octave-bug-tracker] [bug #58118] canonicalize_file_name doesn't not return empty for non-existent files
,
Philip Nienhuis
,
09:54
[Octave-bug-tracker] [bug #58109] Editor: highlighted/selected text removed on focus change
,
Torsten Lilge
,
06:55
[Octave-bug-tracker] [bug #58110] Specified fonts not rendered in pdf output with gnuplot toolkit
,
INVALID.NOREPLY
,
06:42
[Octave-bug-tracker] [bug #58045] [octave forge] (io) odsread error
,
Philip Nienhuis
,
06:13
[Octave-bug-tracker] [bug #58082] [MXE Octave] installer does not run pkg rebuild automatically on install
,
A.R. Burgers
,
03:34
April 04, 2020
[Octave-bug-tracker] [bug #58116] Feature Request: missing option "all" for several functions - sum, mean, and others
,
Nicholas Jankowski
,
19:56
[Octave-bug-tracker] [bug #58116] Feature Request: missing option "all" for several functions - sum, mean, and others
,
Rik
,
19:28
[Octave-bug-tracker] [bug #58116] Feature Request: missing option "all" for several functions - sum, mean, and others
,
Rik
,
19:27
[Octave-bug-tracker] [bug #58116] Matlab Compatibility: missing option "all" for several functions - sum, mean, and others
,
Nicholas Jankowski
,
18:58
[Octave-bug-tracker] [bug #58110] Specified fonts not rendered in pdf output with gnuplot toolkit
,
Rik
,
14:15
[Octave-bug-tracker] [bug #58112] inputParser error while handling cell array as optional argument
,
Jukka Hynninen
,
13:28
[Octave-bug-tracker] [bug #58096] Plot first segment in ostreamtube
,
Hg200
,
07:54
April 03, 2020
[Octave-bug-tracker] [bug #58110] Nimbus Sans not working in plot with pdf as output
,
anonymous
,
20:43
[Octave-bug-tracker] [bug #58109] Editor: highlighted/selected text removed on focus change
,
anonymous
,
12:23
[Octave-bug-tracker] [bug #58106] xlim() on Bode Plot only Applied on the Phase Plot
,
Rik
,
11:32
[Octave-bug-tracker] [bug #58089] [Feature Request] sum along multiple dimensions
,
Rik
,
11:31
[Octave-bug-tracker] [bug #58106] xlim() on Bode Plot only Applied on the Phase Plot
,
anonymous
,
00:29
April 02, 2020
[Octave-bug-tracker] [bug #58105] isfield needs time proportional to number of fields
,
Francesco Potortì
,
19:57
[Octave-bug-tracker] [bug #58102] Wrong step response for transfer function
,
Doug Stewart
,
10:35
[Octave-bug-tracker] [bug #58102] Wrong step response for transfer function
,
Doug Stewart
,
10:29
[Octave-bug-tracker] [bug #58102] Wrong step response for transfer function
,
Doug Stewart
,
10:08
[Octave-bug-tracker] [bug #58102] Wrong step response for transfer function
,
anonymous
,
07:52
[Octave-bug-tracker] [bug #58080] [octave forge] (io) dbfwrite / shapewrite error
,
Philip Nienhuis
,
03:54
[Octave-bug-tracker] [bug #58090] Command line freeze when typing
,
Tobias Berg
,
03:17
April 01, 2020
[Octave-bug-tracker] [bug #58080] [octave forge] (io) dbfwrite / shapewrite error
,
Philip Nienhuis
,
17:29
[Octave-bug-tracker] [bug #50813] importdata returns cell-of-strings instead of struct
,
Guillaume
,
05:02
[Octave-bug-tracker] [bug #50813] importdata returns cell-of-strings instead of struct
,
Guillaume
,
04:35
[Octave-bug-tracker] [bug #58093] Multiplication of Vector Functions
,
Kai Torben Ohlhus
,
00:05
[
Prev Period
]
[
Next Period
]
Mail converted by
MHonArc